本文
海外規格情報の閲覧サービス
都産技研本部に設置している専用端末(ライブラリーサーバー)で、BS EN の全規格を検索および閲覧いただくことができます。
また、お客さまからのニーズの高い規格書は印刷版(冊子)をご用意しており、原本および翻訳版を閲覧いただくことができます。
※閲覧は、事前予約制 となっております。閲覧場所は 都産技研本部(東京都江東区青海2-4-10)です。
ご利用の流れ
- MTEP相談予約フォーム からお申込みをお願いいたします。
- ご相談件名に「海外規格閲覧」、ご相談内容に「閲覧希望の規格番号」をご記載ください
- 担当者から来所の日程調整について、ご連絡をさせていただだきます。
- 当日は、お客様が閲覧いただく規格書の準備をいたしますので、
ご案内のお時間にご来所くださいますよう、ご協力をお願いいたします。
Web閲覧できる海外規格
東京都立産業技術センター本部内に設置の専用端末にて検索・閲覧がご利用いただけます。
・BS EN 全規格
※保存・印刷はできません。
冊子にて閲覧できる海外規格
次の海外規格を配架しています。
「翻訳」欄に〇がついている規格は、翻訳版を配架しています。
※複写については 図書室のご案内 をご覧ください。
AMS規格
規格番号 | タイトル | 翻訳 |
---|---|---|
AMS 03-2 : 2015 | Cleaning and Preparation of Metal Surfaces | |
AMS 03-2 Rev.A :2017 | ||
AMS 03-2 Rev.B :2019 | ||
AMS 2269 Rev.F:2012 | Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys | |
AMS 2371 Rev.J :2015 | Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloys Wrought Products and Foring Stock | |
AMS 2371 Rev.K :2016 | ||
AMS 2371 Rev.L :2019 | ||
AMS 2403 Rev.N :2015 | Plating, Nickel, General Purpose | |
AMS 2403 Rev.R :2021 | ||
AMS 2406 Rev.N :2015 | Plating, Chromium, Hard Deposit | |
AMS 2406 Rev.P :2020 | ||
AMS 2418 Rev.H :2011 | Plating, Copper | |
AMS 2418 Rev.J :2017 | ||
AMS 2430 Rev.T :2015 | Shot Peening, Automatic | |
AMS 2430 Rev.U :2018 | ||
AMS 2438 Rev.E :2015 | (R) Plating, Chromium Thin, Hard, Dense Deposit | |
AMS 2460 Rev.A :2013 | Plating, Chromium | |
AMS 2469 Rev.J :2014 | Hard Anodic Coating on Aluminum and Aluminum Alloys | |
AMS 2471 Rev.H :2014 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Undyed Coating | |
AMS 2471 Rev.J :2020 | ||
AMS 2472 Rev.G :2014 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Dyed Coating | |
AMS 2472 Rev.H :2020 | ||
AMS 2473 Rev.H :2013 | Chemical Film Treatment for Aluminum Alloys, General Purpose Coating | |
AMS 2473 Rev.J :2020 | ||
AMS 2474 Rev.D :2013 | Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating | |
AMS 2474 Rev.E :2019 | ||
AMS 2477 Rev.A :2010 | Conversion Coating for Aluminum Alloys, Low Electrical Resistance Coating | |
AMS 2477 Rev.D :2019 | ||
AMS 2486 Rev.E :2010 | Conversion Coating of Titanium Alloys, Fluoride-Phosphate Type | |
AMS 2488 Rev.D :2011 | Anodic Treatment - Titanium and Titanium Alloys, Solution pH 13 or Higher | |
AMS 2488 Rev.E :2019 | ||
AMS 2658 Rev.C :2009 | Hardness and Conductivity Inspection of Wrought Aluminium Alloy Parts | |
AMS 2658 Rev.D :2016 | ||
AMS 2700 Rev.E :2011 | Passivation of Corrosion Resistant Steels | |
AMS 2700 Rev.F :2018 | ||
AMS 2750 Rev.E :2012 | (R) Pyrometry | 〇 |
AMS 2750 Rev.F :2020 | 〇 | |
AMS 2757 Rev.B :2010 | Gaseous Nitrocarburizing | |
AMS 2757 Rev.C :2019 | ||
AMS 2759 Rev.E :2014 | Heat Treatment of Steel Parts, General Requirements | |
AMS 2759 Rev.G :2019 | 〇 | |
AMS 2759/1 Rev.E :2014 | Heat Treatement of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strenght Below 220 ksi(1517 MPa) | |
AMS 2759/1 Rev.H :2019 | ||
AMS 2759/1 Rev.J :2021 | ||
AMS 2759/2 Rev.F :2014 | Heat Treatment of Low-Alloy Steel Parts, Minimum Tensile Strength 220 ksi(1517 MPa) and Higher | |
AMS 2759/2 Rev.J :2019 | ||
AMS 2759/2 Rev.K :2021 | ||
AMS 2759/3 Rev.F :2015 | Heat Treatment Precipitation-Hardening, Corrosion-Resistant and Maraging Steel Parts | |
AMS 2759/3 Rev.H :2019 | Heat Treatment Precipitation-Hardening, Corrosion-Resistant, Maraging and Secondary Hardening Steel Parts | |
AMS 2759/3 Rev.J :2020 | ||
AMS 2759/4 Rev.C :2014 | Heat Treatment, Austenitic Corrosion-Resistant Steel Parts | |
AMS 2759/4 Rev.D :2018 | ||
AMS 2759/5 Rev.D :2014 | Heat Treatment Martensitic Corrosion-Resistant Steel Parts | |
AMS 2759/5 Rev.E :2018 | ||
AMS 2759/5 Rev.F :2020 | ||
AMS 2759/6 Rev.B :2014 | Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts | |
AMS 2759/6 Rev.C :2018 | Gas Nitriding of Low-Alloy Steel Parts | |
AMS 2759/7 Rev.B :2014 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts | |
AMS 2759/7 Rev.D :2019 | ||
AMS 2759/7 Rev.E :2021 | ||
AMS 2759/9 Rev.D :2009 | Hydrogen Embrittlement Relife(Baking)of Steel Parts | |
AMS 2759/9 Rev.E :2018 | Hydrogen Embrittlement Relife(Baking)of Steel Parts | |
AMS 2759/10 Rev.A :2014 | Automated Gaseous Nitriding Controlled by Nitriding Potential | |
AMS 2759/10 Rev.B :2018 | (R)Automated Gaseous Nitriding Controlled by Nitriding Potential | |
AMS 2759/11 : 2014 | Stress Relief of Steel Parts | |
AMS 2759/11 Rev.A :2018 | (R)Stress Relief of Steel Parts | |
AMS 2759/12 Rev.A :2007 | Gaseous Nitrocarburizing, Automatically Controlled by Potentials | |
AMS 2759/12 Rev.B :2018 | (R)Automated Gaseous Nitrocarburizing Controlled by Potentials | |
AMS 2769 Rev.B :2014 | Heat Treatment of Parts in a Vacuum | |
AMS 2769 Rev.C :2019 | (R)Heat Treatment of Parts in a Vacuum | |
AMS 2769 Rev.D :2020 | Heat Treatment of Parts in a Vacuum | |
AMS 2770 Rev.N :2015 | Heat Treatment of Wrought Aluminium Alloy Parts | |
AMS 2770 Rev.P :2019 | 〇 | |
AMS 2770 Rev.R :2020 | 〇 | |
AMS 2771 Rev.E :2013 | Heat Treatment of Aluminium Alloy Castings | |
AMS 2771 Rev.F :2017 | ||
AMS 2772 Rev.F :2011 | Heat Treatment of Aluminium Alloy Raw Materials | |
AMS 2772 Rev.G :2016 | ||
AMS 2773 Rev.E :2013 | Heat Treatment, Cast Nickel Alloy and Cobalt Alloy Parts | |
AMS 2774 Rev.E :2016 | Heat Treatment, Wrought Nickel Alloy and Cobalt Alloy Parts | |
AMS 2774 Rev.G :2020 | ||
AMS 4027 Rev.N :2014 | Aluminium Alloy, Sheet and Plate, 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061;-T6Sheet,-T651Plate), Solution and Precipitation Heat Treated | |
AMS 4037 Rev.Q :2014 | Aluminum Alloy Sheet and Plate, 4.4 Cu-1.5 Mg-0.60 Mn(2024;-T3 Flat Sheet, T351 Plate), Solution Heat Treated | |
AMS 4037 Rev.R :2020 | ||
AMS 4166 Rev.G :2012 | Aluminium Alloy, Extrusions, 5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T73), Solution Heat Treated and Overaged | |
AMS 5528 Rev.H :2012 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr-7.1Ni-1.1Al, Solution Heat Treated, Precipitation Hardenable | |
AMS 5528 Rev.J :2019 | ||
AMS 5529 Rev.J :2012 | Steel,Corrosion Resistant, Sheet and Strip, 17Cr-7.1Ni-1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch(0.038 to 1月2日7mm)Nominal Thickness | |
AMS 5529 Rev.K :2019 | ||
AMS 5662 Rev.M :2009 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775℉(968℃) Solution Heat Treated, Precipitation-Hardenable | |
AMS 5662 Rev.N :2016 | ||
AMS 5663 Rev.M :2009 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775℉(968℃) Solution and Precipitation Heat Treated | |
AMS 5663 Rev.N :2016 | ||
AMS 6415 Rev.T :2012 | Steel, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) | |
AMS 6415 Rev.U :2016 | ||
AMS 6491 Rev.E :2014 | Steel Bars, Forgings, and Tubing, 4.1Cr-4.2Mo-1.0V(0.80-0.85C)(M-50), Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted | |
AMS 6491 Rev.F :2018 | ||
AMS-H-6875 Rev.B :2010 | Heat Treatment of Steel Raw Materials | |
AMS-H-7199 Rev.A :2013 | Heat Treatment of Wrought Copper-Beryllium Alloy, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510) | |
AMS-P-21600 : 1998 | Paint System, Fluorescent, Removable, for Aircraft Application | |
AMS-P-21600 Rev.A :2013 | (R) Paint System, Fluorescent, Removable, for Aircraft Application | |
AMS-P-21600 Rev.B :2019 | Paint System, Fluorescent, Removable, for Aircraft Application | |
AMS-QQ-A-250 Rev.A :2012 | Aluminum and Aluminum Alloy, Plate and Sheet, General Specification for | |
AMS-QQ-A-250 Rev.B :2018 | ||
AMS-QQ-A-250/4 Rev.B :2015 | Aluminum Alloy 2024, Plate and Sheet | |
AMS-QQ-C-320 Rev.B :2008 | Chromium Plating (Electrodeposited) | |
AMS-QQ-N-290 Rev.C :2015 | Nickel Plating (Electrodeposited) | |
AMS-QQ-P-35 Rev.A | Passivation Treatments for Corrosion-Resistant Steel (Cancelled Feb 2005) | |
AMS-S-6090 Rev.B | Steel Carburizing and Nitriding, Processes for (Cancelled May 2006) | |
AMS-STD-753 Rev.A :2012 | Corrosion-Resistant Steel Parts: Aampling, Inspection and Testing for Surface Passivation | |
AMS-STD-753 Rev.B :2017 |
ANSI規格
規格番号 | タイトル | 翻訳 |
---|---|---|
ANSI/ASQ Z1.4-2003 :R2013 | Sampling Procedures and Tables for Inspection by Attributes | |
ANSI/RIA R15.6-2012 | American National Standard for industrial Robots and Robot Systems-Safety Requirements | |
ANSI C63.4 Edition: 09 | METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW--VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHZ TO 40 GHZ | |
ANSI C63.4 Edition: 14 | ||
ANSI C63.4a Edition: 17 | ||
ANSI C63.5 Edition: 06 | ELECTROMAGNETIC COMPATIBILITY--RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL--CALIBRATION OF ANTENNAS(9 KHZ TO 40 GHZ) | |
ANSI C63.5 Edition: 17 |
ASTM規格
規格番号 | タイトル | 翻訳 |
---|---|---|
ASTM B117 - 11 | Standard Practice for Operating Salt Spray (Fog) Apparatus | 〇 |
ASTM B117 - 16 | ||
ASTM B117 - 19 | ||
ASTM B487 - 85(2007) | Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section | |
ASTM B487 - 20 | ||
ASTM B499 - 09 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals | |
ASTM B504 - 90(2011) | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method | |
ASTM B556 - 90(2007) | Standard Guide for Measurement of Thin Chromium Coatings by Spot Test | |
ASTM B556 - 90(2013) | ||
ASTM B567 - 98(2009a) | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method | |
ASTM B567 - 98(2014) | ||
ASTM B568 - 98(2009) | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry | |
ASTM B568 - 98(2014) | ||
ASTM B571 - 97(2008)e1 | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings | |
ASTM B571 - 97(2013) | ||
ASTM B571 - 18 | ||
ASTM B578 - 87(2009) | Standard Test Method for Microhardness of Electroplated Coatings | |
ASTM B578 - 87(2015) | ||
ASTM B578 - 21 | ||
ASTM B748 - 90(2010) | Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope | |
ASTM D822 - 01(2006) | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings | |
ASTM D822 / D822M - 13 | ||
ASTM D1499 - 05 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics | |
ASTM D1499 - 13 | ||
ASTM D2244 - 11 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates | |
ASTM D2244 - 16 | ||
ASTM D2244 - 21 | ||
ASTM D3339 - 12 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration | |
ASTM D3339 - 21 | ||
ASTM D3361 - 01(2006) | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings | |
ASTM D3361 / D3361M - 13 | ||
ASTM E3 - 11 | Standard Guide for Preparation of Metallographic Specimens | |
ASTM E8 / E8M - 11 | Standard Test Methods for Tension Testing of Metallic Materials | |
ASTM E8 / E8M - 15a | 〇 | |
ASTM E8 / E8M - 16a | ||
ASTM E8 / E8M - 16ae1 | ||
ASTM E8 / E8M - 21 | ||
ASTM E10 - 12 | Standard Test Method for Brinell Hardness of Metallic Materials | |
ASTM E10 - 15a | ||
ASTM E10 - 17 | ||
ASTM E10 - 18 | ||
ASTM E18 - 11 | Standard Test Methods for Rockwell Hardness of Metallic Materials | |
ASTM E18 - 12 | 〇 | |
ASTM E18 - 15 | 〇 | |
ASTM E18 - 16 | ||
ASTM E18 - 19 | 〇 | |
ASTM E18 - 20 | ||
ASTM E21 - 09 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials | |
ASTM E21 - 17 | ||
ASTM E21 - 17e1 | ||
ASTM E21 - 20 | ||
ASTM E23 - 07ae1 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | 〇 |
ASTM E23 - 12c | ||
ASTM E23 - 16b | ||
ASTM E23 - 18 | ||
ASTM E112 - 10 | Standard Test Methods for Determining Average Grain Size | |
ASTM E112 - 12 | ||
ASTM E112 - 13 | Standard Test Methods for Determining Average Grain Size 1 | 〇 |
ASTM E139 - 11 | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials | |
ASTM E384 - 11e1 | Standard Test Method for Knoop and Vickers Hardness of Materials | |
ASTM E384 - 16 | Standard Test Method for Microindentation Hardness of Materials | 〇 |
ASTM E384 - 17 | ||
ASTM E498 / E498M - 11 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode | |
ASTM E930 - 99(2007) | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) | |
ASTM E930 - 99(2015) | ||
ASTM E930 - 18 | ||
ASTM E1181 - 02(2008) | Standard Test Methods for Characterizing Duplex Grain Sizes | |
ASTM E1181 - 02(2015) | ||
ASTM F22 - 02(2007) | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test | |
ASTM F22 - 13 | ||
ASTM F 519 - 12 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments | |
ASTM F 519 - 12a | ||
ASTM F 519 - 13 | ||
ASTM F 519 - 17a | ||
ASTM F 519 - 18 | ||
ASTM F 963 - 17 | Standard Consumer Safety Specification for Toy Safety | |
ASTM G151 - 10 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | |
ASTM G151 - 19 | ||
ASTM G152 - 05 | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials | |
ASTM G152 - 06 | ||
ASTM G152 - 13 | ||
ASTM G153 - 04(2010) | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials | |
ASTM G153 - 13 | ||
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01.01 Steel-Piping,Tubing,Fittings | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01.02 Ferrous Castings;Ferroalloys | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月03日 Steel-Plate,Sheet,Strip,Wire;Stainless Steel Bar | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月04日 Steel-Structural,Reinforcing,Pressure Vessel,Railway | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月05日 Steel-Bars,Forgings,Bearing,Chain,Tool | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月06日 Coated Steel Products | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月07日 Ships and Marine Technology | |
ASTM ANNUALBOOK 2015 | Section1 Iron and Steel Products Volume01月08日 Fasteners;Rolling Element Bearings | |
ASTM ANNUALBOOK 2015 | Section2 Nonferrous Metal Products Volume02月01日 Copper and Copper Alloys | |
ASTM ANNUALBOOK 2015 | Section2 Nonferrous Metal Products Volume02月02日 Aluminum and Magnesium Alloys | |
ASTM ANNUALBOOK 2015 | Section2 Nonferrous Metal Products Volume02月03日 Electrical Conductors | |
ASTM ANNUALBOOK 2015 | Section2 Nonferrous Metal Products Volume02月04日 Nonferrous Metals-Nickel,Cobalt,Lead,Tin,Zinc,Cadmium,Precious, | |
ASTM ANNUALBOOK 2015 | Section2 Nonferrous Metal Products Volume02月05日 Metallic and Inorganic Coatings;Metal Powders and Metal Powder Produ | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月01日 Metals-Mechanical Testing;Elevated and Low-Tem | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月02日 Corrosion of Metals;Wear and Erosion | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月03日 Nondestructive Testing | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月04日 Magnetic Properties | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月05日 Analytical Chemistry for Metals, Ores, | |
ASTM ANNUALBOOK 2015 | Section3 Metals Test Methods and Analytical Procedures Volume03月06日 Molecular Spectroscopy; Surface Analysis | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月01日 Petroleum Products and Lubricants(I):C123-D3710 | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月02日 Petroleum Products and Lubricants(II):D3711- | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月03日 Petroleum Products and Lubricants (III):D6138- | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月04日 Petroleum Products and Lubricants (IV): D6973- | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月05日 Combustion Characteristics; Manufactured Carbon | |
ASTM ANNUALBOOK 2015 | Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05月06日 Gaseous Fuels; Coal and Coke | |
ASTM ANNUALBOOK 2015 | Section6 Paints,Related Coatings, and Aromatics Volume06月01日 Paint-Tests for Chemical,Physical, and Optical | |
ASTM ANNUALBOOK 2015 | Section6 Paints,Related Coatings, and Aromatics Volume06月02日 Paint-Products and Applications; Protective Coatings; | |
ASTM ANNUALBOOK 2015 | Section6 Paints,Related Coatings,and Aromatics Volume06月03日 Paint-Pigments,Drying Oils,Polymers,Resins,Naval Stores, | |
ASTM ANNUALBOOK 2015 | Section6 Paints,Related Coatings, and Aromatics Volume06月04日 Paint-Solvents; Aromatic Hydrocarbons | |
ASTM ANNUALBOOK 2015 | Section14 General Methods and Instrumentation Volume14.02 General Test Methods; Forensic Psychophysiology | |
ASTM ANNUALBOOK 2015 | Section14 General Methods and Instrumentation Volume14.04 Laboratory Apparatus; Degradation of Materials; SI; | |
ASTM ANNUALBOOK 2015 | Section15 General Products,Chemical Specialties,and End Use Products Volume15.03 Space Simulation; | |
ASTM ANNUALBOOK 2015 | Section15 General Products,Chemical Specialties,and End Use Products Volume15.06 Adhesives | |
ASTM ANNUALBOOK 2015 | Section15 General Products,Chemical Specialties,and End Use Products Volume15.11 Consumer Products |
ARP規格
規格番号 | タイトル | 翻訳 |
---|---|---|
ARP 1755 Rev.B :2000 | Effect of Cleaning Agents on Aircraft Engine Materials, Stock Loss Test Method | |
ARP 1820 Rev.B :2012 | Chord Method of Evaluating Surface Microstructural Characteristics | |
ARP 1820 Rev.C :2021 | ||
ARP 1917 Rev.A :2013 | (R)Clarification of Terms Used in Aerospace Metals Specifications | |
ARP 1962 Rev.A :2007 | Training and Approval of Heat-Treating Personnel | |
ARP 1962 Rev.B :2019 | ||
ARP 4992 Rev.B :2012 | Periodic Test for Processing Solutions |
AWS規格
規格番号 | タイトル | 翻訳 |
---|---|---|
AWS D17.1/D17.1M:2010-AMD1 | Specification for Fusion Welding for Aerospase Applications | |
AWS D17.1/D17.1M 3rd :2017- AMD2 |
CISPR規格
規格番号 | タイトル | 翻訳 |
---|---|---|
CISPR 11 Ed. 5.0 : 2009 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 11 Ed. 5.1 : 2010 | ||
CISPR 11 Amd.1 Ed. 5.0:2010 | Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 11 Ed. 6.0 : 2015 (b) | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 11 Amd.1 Ed. 6.0 : 2016 | Amendment 1 -Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 11 Amd.2 Ed.6.0 : 2019 | Amendment 2 - Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz | 〇 |
CISPR 12 Ed. 6.0 : 2007 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | 〇 |
CISPR 12 Amd.1 Ed. 6.0 : 2009 | Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | 〇 |
CISPR 12 Ed. 6.1 : 2009 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | |
CISPR 13 Ed. 5.0 : 2009 | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 13 Amd.1 Ed. 5.0 : 2015 (b) | Amendment 1 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 14-1 Ed. 5.0 : 2005 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | 〇 |
CISPR 14-1 Amd.1 Ed. 5.0 : 2008 | Amendment 1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | 〇 |
CISPR 14-1 Amd.2 Ed. 5.0 : 2011 | Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | 〇 |
CISPR 14-1 Ed. 5.2 : 2011 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | |
CISPR 14-1 Ed. 6.0 : 2016 | 〇 | |
CISPR 14-1 Ed. 7.0 : 2020 | 〇 | |
CISPR 14-2 Ed. 1.1 : 2001 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard | 〇 |
CISPR 14-2 Amd.2 Ed. 1.1 : 2008 | Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard | 〇 |
CISPR 14-2 Ed. 1.2 : 2008 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard | |
CISPR 14-2 Ed. 2.0 : 2015 | 〇 | |
CISPR 14-2 Ed. 3.0 : 2020 | 〇 | |
CISPR 15 Ed. 7.0 : 2005 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
CISPR 15 Amd.1 Ed. 7.0 : 2006 | Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
CISPR 15 Amd.2 Ed. 7.0 : 2008 | Amendment 2 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
CISPR 15 Ed. 7.2 : 2009 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
CISPR 15 Ed. 8.0 : 2013 | ||
CISPR 15 Amd.1 Ed. 8.0 : 2015 | Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
CISPR 15 Ed. 9.0 : 2018 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
CISPR 16-1-2 Ed. 1.0 : 2003 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | 〇 |
CISPR 16-1-2 Amd.1 Ed. 1.0 : 2004 | Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | 〇 |
CISPR 16-1-2 Amd.2 Ed. 1.0 : 2006 | Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | 〇 |
CISPR 16-1-2 Ed. 1.2 : 2006 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | |
CISPR 16-1-2 Ed. 2.0 : 2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | 〇 |
CISPR 16-1-2 Amd.1 Ed. 2.0 : 2017 | Amendment 1-Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements | 〇 |
CISPR 16-1-3 Ed. 2.0 : 2004 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | 〇 |
CISPR 16-1-3 Amd.1 Ed. 2.0 : 2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | 〇 |
CISPR 16-1-3 Amd.2 Ed. 2.0 : 2020 | Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | 〇 |
CISPR 16-2-1 Ed. 2.0 : 2008 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | 〇 |
CISPR 16-2-1 Amd.1 Ed. 2.0 : 2010 | Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | 〇 |
CISPR 16-2-1 Ed. 2.1 : 2010 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | |
CISPR 16-2-1 Amd.2 Ed. 2.0 : 2013 | Amendment 2- Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | 〇 |
CISPR 16-2-1 Ed. 3.0 : 2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | 〇 |
CISPR 16-2-1 Amd.1 Ed. 3.0 : 2017 | Amendment 1- Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements | 〇 |
CISPR 16-2-2 Ed. 2.0 : 2010 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power | 〇 |
CISPR 16-2-3 Ed.4.0 : 2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements | 〇 |
CISPR 16-2-3 Amd.1 Ed.4.0 :2019 | Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements | 〇 |
CISPR 16-2-4 Ed. 1.0 : 2003 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements | 〇 |
CISPR 20 Ed. 6.0 : 2006 | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | 〇 |
CISPR 20 Amd.1 | Amemdment 1 - Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | 〇 |
CISPR 22 Ed. 6.0 : 2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | 〇 |
CISPR 24 Ed. 2.0 : 2010 | Information technology equipment - Immunity characteristics - Limits and methods of measurement | 〇 |
CISPR 24 Amd.1 | Amendment 1 - Information technology equipment - Immunity characteristics - Limits and methods of measurement | 〇 |
CISPR 25 Ed. 3.0 : 2008 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | 〇 |
CISPR 25 Ed. 4.0 : 2016 | 〇 | |
CISPR 25 Ed. 5.0 : 2021 | 〇 | |
CISPR 32 Ed. 2.0 : 2015 | Electromagnetic compatibility of multimedia equipment - Emission requirements | 〇 |
CISPR 32 Amd.1 | Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements | 〇 |
CISPR 35 Ed.1.0 : 2016 | Electromagnetic compatibility of multimedia equipment - Immunity requirements | 〇 |
FCC規格
規格番号 | タイトル | 翻訳 |
---|---|---|
47CFR part 1 : 2010 | Practice and procedure | |
47CFR part 1 : 2012 | ||
47CFR part 15 : 2010 | Radio frequency devices | |
47CFR part 15 : 2012 | ||
47CFR part 18 : 2010 | Industrial,scientifc,and medical equipment | |
47CFR part 18 : 2012 |
EN規格
規格番号 | タイトル | 翻訳 |
---|---|---|
EN 71-1 : 2011 | Safety of toys. Mechanical and physical properties | 〇 |
EN 71-1 : 2014 | ||
EN 71-1 : 2014+A1 : 2018 | ||
EN 71-2 : 2011 | Safety of toys. Flammability | 〇 |
EN 71-2 : 2011+A1 : 2014 | 〇 | |
EN 71-2 : 2020 | ||
EN 71-3 : 2013 | Safety of toys. Migration of certain elements | 〇 |
EN 71-3 : 2013+A1 : 2014 | 〇 | |
EN 71-3 : 2013+A3 : 2018 | ||
EN 71-3 : 2019 | 〇 | |
EN 71-3 : 2019+A1 : 2021 | ||
EN 71-4 : 2020 | Safety of toys - Part 4: Experimental sets for chemistry and related activities | |
EN 71-7 : 2014+A3 : 2020 | Finger paints - Requirements and Test Methods; Third Amendment Published On 08 April 2020, the Technical Committee CEN/TC 52 “Safety of toys" publishe | |
EN 71-12 : 2016 | Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances | |
EN 71-13 : 2021 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games | |
EN 287-1 : 2011 | Qualification test of welders - fusion Welding | 〇 |
EN 593 : 2009+A1 : 2011 | Industrial valves - Metallic butterfly valves | |
EN 593 : 2017 | Industrial valves - Metallic butterfly valves for general purposes | |
EN 764-5 : 2014 | Pressure equipment. Inspection documentation of metallic materials and compliance with the material specification | |
EN 1171 : 2015 | Industrial valves - Cast iron gate valves | |
EN 1349 : 2009 | Industrial process control valves | |
EN 1515-4 : 2009 | Flanges and their joints - Bolting. Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC | |
EN 1983 : 2013 | Industrial valves - Steel ball valves | |
EN 1984 : 2010 | Industrial valves - Steel gate valves | |
EN ISO 9606-1 : 2017 | Qualification testing of welders - Fusion welding. Steels | |
EN 10204 : 2004 | Metallic products - Types of inspection documents | 〇 |
EN 12266-1 : 2012 | Industrial valves - Testing of metallic valves | |
EN 12516-1 : 2014 | Industrial valves - Shell design strength. Tabulation method for steel valve shells | |
EN 12516-1 : 2014+A1 : 2018 | ||
EN 12516-2 : 2014 | Industrial valves - Shell design strength. Calculation method for steel valve shells | |
EN 12516-3 : 2002 | Valvaes - Shell design strength | |
EN 12516-4 : 2014 | Industrial valves - Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel | |
EN 12516-4 : 2014+A1 : 2018 | ||
EN 15038:2006 | Translaton services - Service requirements | |
EN ISO 15613 : 2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre- production welding test | |
EN ISO 15614-1 : 2004+A2 : 2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys | |
EN ISO 15614-1 : 2017 | ||
EN ISO 15614-1 : 2017+A1 : 2019 | ||
EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials | |
EN ISO 16136:2006+A1 : 2019 | ||
EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials | |
EN ISO 16137:2006+A1 : 2019 | ||
EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials | |
EN ISO 16138:2006+A1 : 2019 | ||
EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials | |
EN ISO 16139:2006+A1 : 2019 | ||
EN 16767:2016 | Industrial valves - Steel and cast iron check valves | |
EN 16767:2020 | Industrial valves - Metallic check valves | |
EN ISO 17100 : 2015 | Translation Services - Requirements for translation services | |
EN ISO 17100 : 2015+A1 : 2017 | ||
EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials | |
EN ISO 21787:2006+A1 : 2019 | ||
EN 50561-1 : 2013 | Power line communication apparatus used in low- voltage installations - Radio disturbance characteristics - Limits and methods of measurement. Part 1- Apparatus for in-home use | |
EN 50581 : 2012 | Technical documentation for the assessment of electrical and elevtronic products with respect to the restriction of hazardous substances | 〇 |
EN 55011 : 2009+A1 : 2010 | Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement | 〇 |
EN 55011 : 2016 | 〇 | |
EN 55011 : 2016+A1 : 2017 | 〇 | |
EN 55011 : 2016+A11 : 2020 | 〇 | |
EN 55011 : 2016+A2 : 2021 | 〇 | |
EN 55012 : 2007 | Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers | 〇 |
EN 55012 : 2007+A1 : 2009 | ||
EN 55013 : 2001 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement | 〇 |
EN 55013 : 2001+A2 : 2006 | ||
EN 55013 : 2013 | 〇 | |
EN 55013 : 2013+A1 : 2016 | ||
EN 55014-1 : 2006+A2 : 2011 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 1 -Emission | 〇 |
EN 55014-1 : 2017 | 〇 | |
EN 55014-1 : 2017+A11 : 2020 | 〇 | |
EN 55014-2 : 1997+A2 : 2008 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus.Part 1 - Immunity. Product family standard | 〇 |
EN 55014-2 : 2015 | 〇 | |
EN 55015 : 2006+A2 : 2009 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | 〇 |
EN 55015 : 2013+A1 : 2015 | 〇 | |
EN IEC 55015 : 2019 | ||
EN IEC 55015 : 2019+A11 : 2020 | ||
EN 55022 : 2010 | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement | 〇 |
EN 55024 : 2010 | Information technology equipment. Immunity characteristics. Limits and methods of measurement | 〇 |
EN 55024 : 2010+A1 : 2015 | 〇 | |
EN 55032 : 2015 | Electromagnetic compatibility of multimedia equipment - Emission requirements | 〇 |
EN 55035 : 2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements | 〇 |
EN 55103-2 : 2009 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Immunity | |
EN 60335-1 : 2012 | Household and similar electrical applicances- Safety. Part 1:General requirements | 〇 |
EN 60335-1 : 2012+A11 : 2014 | 〇 | |
EN 60335-1 : 2012+A13 : 2017 | ||
EN 60335-1 : 2012+A2 : 2019 | 〇 | |
EN 60335-1 : 2012+A15 : 2021 | ||
EN 61000-3-2 : 2006+A2 : 2009 | Electromagnetic compatibility (EMC) - Part 3-2:Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) | 〇 |
EN 61000-3-2 : 2014 | 〇 | |
EN IEC 61000-3-2 : 2019 | ||
EN 61000-3-3 : 2008 | Electromagnetic compatibility (EMC) - Part 3-3: Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low--Voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection | 〇 |
EN 61000-3-3 : 2013 | 〇 | |
EN 61000-3-3 : 2013+A1 : 2019 | 〇 | |
EN 61000-3-3 : 2013+A2 : 2021 | 〇 | |
EN 61000-4-4 : 2004+A1 : 2010 | Electromagnetic compatibility (EMC) - Part 4-4:Testing and measurement techniques - Electrical fast transient/burst immunity test | 〇 |
EN 61000-4-4 : 2012 | 〇 | |
EN 61000-4-5 : 2006 | Electromagnetic compatibility (EMC) - Part 4-5:Testing and measurement techniques - Surge immunity test | 〇 |
EN 61000-4-5 : 2014 | 〇 | |
EN 61000-4-5 : 2014+A1 : 2017 | 〇 | |
EN 61000-6-1 : 2007 | Electromagnetic compatibility (EMC)-Part 6-1: Generic standards- Immunity for residential, commercial and light- Industrial environments | 〇 |
EN IEC 61000-6-1 : 2019 | ||
EN 61000-6-2 : 2005 | Electromagnetic compatibility (EMC) - Part 6-2:Generic standards-Immunity for industrial environments | 〇 |
EN IEC 61000-6-2 : 2019 | ||
EN 61000-6-3 : 2007+A1 : 2011 | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light- Industrial environments | 〇 |
EN 61000-6-4 : 2007+A1 : 2011 | Electromagnetic compatibility (EMC) - Part 6-4 : Generic standards-Emission standard for industrial environments | 〇 |
EN IEC 61000-6-4 : 2019 | ||
EN 61010-1 : 2010/A1 : 2019 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 〇 |
EN 61326-1 : 2006 | Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 1 :General requirements | 〇 |
EN 61326-1 : 2013 | 〇 | |
EN IEC 61326-1:2021 | Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements | 〇 |
EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements | |
EN IEC 62115 : 2020+A11 : 2020 | Rotating Electrical Machines - Part 1: Rating And Performance | |
EN 63000 : 2018 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances | 〇 |
EN IEC 63000 : 2018 |
IEC規格
規格番号 | タイトル | 翻訳 |
---|---|---|
IEC 60034-1 Ed. 13.0 :2017 | Rotating electrical machines – Part 1: Rating and performance | 〇 |
IEC 60034-1 Ed. 14.0 : 2022 | 〇 | |
IEC 60034-30 Ed. 1.0 :2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) | 〇 |
IEC 60034-30-1 Ed.1.0 :2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) | |
IEC 60068-2-6 Ed.7.0 :2007 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) | 〇 |
IEC 60068-2-27 Ed.4.0 :2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock | 〇 |
IEC 60068-2-42 Ed.3.0 :2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections | 〇 |
IEC 60068-2-43 Ed.2.0 :2003 | Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections | 〇 |
IEC 60068-2-64 Ed.2.0 :2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance | 〇 |
IEC 60068-2-64 Amd.1 Ed.2.0 :2019 | Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance | 〇 |
IEC 60079-0 Ed.6.0 :2011 | Explosive atmospheres - Part 0: Equipment - General requirements | |
IEC 60079-0 Ed.7.0 :2017 | ||
IEC 60079-1 Ed.6.0 :2007 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" | |
IEC 60079-1 Ed.7.0 :2014 | ||
IEC 60204-1 Ed.5.0 :2005 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements | 〇 |
IEC 60204-1 Amd.1 Ed.5.0 :2008 | Amendment 1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements | 〇 |
IEC 60204-1 Ed.6.0 :2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements | 〇 |
IEC 60204-1 Amd.1 Ed. 6.0 : 2021 | 〇 | |
IEC 60204-11 Ed.1.0 :2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | 〇 |
IEC 60204-11 Ed.2.0 :2018 | 〇 | |
IEC 60335-1 Ed.5.0 :2010 | Household and similar electrical appliances - Safety - Part 1: General requirements | 〇 |
IEC 60335-1 Amd.1 Ed. 5.0 :2013 | Amendment 1 - Household and similar electrical appliances - Safety - Part 1: General requirements | 〇 |
IEC 60335-1 Amd.2 Ed. 5.0 :2016 | Amendment 2 - Household and similar electrical appliances - Safety - Part 1: General requirements | 〇 |
IEC 60335-1 Ed.6.0 :2020 | Household and similar electrical appliances - Safety - Part 1: General requirements | 〇 |
IEC 60529 Ed.2.0 :1992 | Degrees of protection provided by enclosures (IP Code) | 〇 |
IEC 60529 Amd.1 Ed. 2.0 : 1999 | 〇 | |
IEC 60529 Amd.1 | Amendment 1 - Degrees of protection provided by enclosures (IP Code) | 〇 |
IEC 60529 Amd.2 Ed. 2.0 :2013 | Amendment 2 - Degrees of protection provided by enclosures (IP Code) | 〇 |
IEC 60601-1 Ed.3.0 :2005 | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance | 〇 |
IEC 60601-1 Amd.1 Ed.3.0 :2012 | Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance | 〇 |
IEC 60601-1 Amd.2 Ed.3.0 :2020 | Amendment 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance | 〇 |
IEC 60601-1-2 Ed.3.0 :2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests | 〇 |
IEC 60601-1-2 Ed.4.0 :2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests | 〇 |
IEC 60601-1-2 Amd.1 Ed.4.0 :2020 | Amendment 1 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests | 〇 |
IEC 60601-1-3 Ed.2.0 :2008 | Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipmment | 〇 |
IEC 60601-1-3 Amd.1 Ed.2.0 :2013 | Amendment 1 - Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipmment | |
IEC 60601-1-3 Amd.2 Ed.2.0 :2021 | Amendment 2 - Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipmment | |
IEC 60601-1-6 Ed. 3.0 :2010 | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability | 〇 |
IEC 60601-1-6 Amd.1 Ed. 3.0 :2013 | Amendment 1 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability | 〇 |
IEC 60601-1-6 Amd.2 Ed. 3.0 :2020 | Amendment 2 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability | |
IEC 60601-1-8 Ed.2.0 :2006 | Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | 〇 |
IEC 60601-1-8 Amd.1 Ed. 2.0 :2012 | Amendment 1 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | 〇 |
IEC 60601-1-8 Amd.2 Ed.2.0 :2020 | Amendment 2 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | 〇 |
IEC 60601-1-9 Ed.1.0 :2007 | Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design | 〇 |
IEC 60601-1-9 Amd.1 Ed.1.0 :2013 | Amendment 1 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design | |
IEC 60601-1-9 Amd.2 Ed.1.0 :2020 | Amendment 2 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design | 〇 |
IEC 60601-1-11 Ed.1.0 :2010 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | 〇 |
IEC 60601-1-11 Ed.2.0 :2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | 〇 |
IEC 60601-1-11 Amd.1 Ed. 2.0 :2020 | Amendment 1 - Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | 〇 |
IEC 60601-2-46 Ed.2.0 :2010 | Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables | 〇 |
IEC 60601-2-46 Ed.3.0 :2016 | ||
IEC 60664-1 Ed.2.0 :2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 〇 |
IEC 60664-1 Ed.3.0 :2020 | Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests | 〇 |
IEC 60664-5 Ed.2.0 :2007 | Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm | |
IEC 60825-1 Ed.2.0 :2007 | Safety of laser products - Part 1: Equipment classification and requirements | 〇 |
IEC 60825-1 Ed.3.0 :2014 | 〇 | |
IEC 60950-1 Ed.2.0 :2005 | Information technology equipment - Safety - Part 1: General requirements | 〇 |
IEC 60950-1 Amd.1 Ed.2.0 :2009 | Amendment 1 - Information technology equipment - Safety - Part 1: General requirements | 〇 |
IEC 60950-1 Amd.2 Ed. 2.0 :2013 | Amendment 2 - Information technology equipment - Safety - Part 1: General requirements | 〇 |
IEC 60950-22 Ed. 1.0 :2005 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors | 〇 |
IEC 60950-22 Ed. 2.0 :2016 | ||
IEC 60990 Ed. 3.0 :2016 | Methods of measurement of touch current and protective conductor current | 〇 |
IEC/TR 61000-1-1 Ed.1.0 :1992 | Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms | 〇 |
IEC/TR 61000-1-3 Ed. 1.0 :2002 | Electromagnetic compatibility (EMC) - Part 1-3: General - The effects of high-altitude EMP (HEMP) on civil equipment and systems | 〇 |
IEC/TR 61000-2-1 Ed. 1.0 :1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems | 〇 |
IEC 61000-2-2 Ed. 2.0 :2002 | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | 〇 |
IEC 61000-2-2 Amd.1 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | 〇 |
IEC 61000-2-2 Amd.2 Ed.2.0 :2018 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | 〇 |
IEC/TR 61000-2-3 Ed.1.0 :1992 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena | 〇 |
IEC 61000-2-4 Ed.2.0 :2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances | 〇 |
IEC/TR 61000-2-6 Ed.1.0 :1995 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances | 〇 |
IEC/TR 61000-2-7 Ed.1.0 :1998 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments | 〇 |
IEC/TR 61000-2-8 Ed.1.0 :2002 | Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | 〇 |
IEC 61000-2-9 Ed.1.0 :1996 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication | 〇 |
IEC 61000-2-10 Ed.1.0 :1998 | Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | 〇 |
IEC 61000-2-10 Ed.2.0 : 2021 | 〇 | |
IEC 61000-2-11 Ed.1.0 :1999 | Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments | 〇 |
IEC 61000-2-13 Ed.1.0 :2005 | Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted | 〇 |
IEC 61000-3-2 Ed.3.0 :2005 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | 〇 |
IEC 61000-3-2 Amd.1 Ed.3.0 :2008 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | 〇 |
IEC 61000-3-2 Amd.2 Ed.3.0 :2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | 〇 |
IEC 61000-3-2 Ed.3.2 :2009 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) | |
IEC 61000-3-2 Ed.4.0 :2014 (b) | 〇 | |
IEC 61000-3-2 Ed.5.0 :2018 | 〇 | |
IEC 61000-3-2 Amd.1 Ed.5.0 :2020 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | 〇 |
IEC 61000-3-3 Ed. 2.0 :2008 | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | 〇 |
IEC 61000-3-3 Ed. 3.0 :2013 | 〇 | |
IEC 61000-3-3 Amd.1 Ed. 3.0 :2017 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | 〇 |
IEC 61000-3-3 Amd.2 Ed. 3.0 :2021 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | 〇 |
IEC/TS 61000-3-4 Ed. 1.0 :1998 | Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A | 〇 |
IEC 61000-3-8 Ed.1.0 :1997 | Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels | 〇 |
IEC 61000-3-11 Ed.1.0 :2000 | Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subjet to conditional connection | 〇 |
IEC 61000-3-11 Ed.2.0 :2017 | 〇 | |
IEC 61000-3-12 Ed.2.0 :2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase | 〇 |
IEC 61000-3-12 Amd.1 Ed. 2.0 :2021 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase | 〇 |
IEC 61000-4-1 Ed.3.0 :2006 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | 〇 |
IEC/TR 61000-4-1 Ed.1.0 :2016 | 〇 | |
IEC 61000-4-2 Ed.2.0 :2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | 〇 |
IEC 61000-4-3 Ed.3.0 :2006 | Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | 〇 |
IEC 61000-4-3 Amd.1 Ed.3.0 :2007 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | 〇 |
IEC 61000-4-3 Amd.2 Ed.3.0 :2010 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | 〇 |
IEC 61000-4-3 Ed.4.0 :2020 | Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | 〇 |
IEC 61000-4-4 Ed.3.0 :2012 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | 〇 |
IEC 61000-4-5 Ed.2.0 :2005 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 〇 |
IEC 61000-4-5 Ed.3.0 ;2014 (b) | 〇 | |
IEC 61000-4-5 Amd.1 Ed.3.0 :2017 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 〇 |
IEC 61000-4-6 Ed.3.0 :2008 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 〇 |
IEC 61000-4-6 Ed.4.0 :2013 (b) | 〇 | |
IEC 61000-4-7 Ed.2.0 :2002 | Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | 〇 |
IEC 61000-4-7 Amd.1 Ed.2.0 :2008 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | 〇 |
IEC 61000-4-8 Ed.2.0 :2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test | 〇 |
IEC 61000-4-9 Ed.1.0 :1993 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | 〇 |
IEC 61000-4-9 Amd.1 Ed.1.0 :2000 | Amendment 1- Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | 〇 |
IEC 61000-4-9 Ed.1.1 :2001 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | |
IEC 61000-4-9 Ed.2.0 :2016 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | 〇 |
IEC 61000-4-10 Ed.1.1 :1993 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 10 :Damped oscillatory magnetic field immunity test | |
IEC 61000-4-10 Amd.1 Ed.1.0 :2000 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test | 〇 |
IEC 61000-4-10 Ed.2.0 :2016 | Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test | 〇 |
IEC 61000-4-11 Ed.2.0 :2004 | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | 〇 |
IEC 61000-4-11 Amd.1 Ed.2.0 :2017 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | 〇 |
IEC 61000-4-11 Ed.3.0 :2020 | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | 〇 |
IEC 61000-4-13 Ed.1.0 :2002 | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | 〇 |
IEC 61000-4-13 Amd.1 Ed.1.0 :2009 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | 〇 |
IEC 61000-4-13 Ed. 1.0時20分15 | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | 〇 |
IEC 61000-4-14 Ed.1.2 :1999 | Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test | 〇 |
IEC 61000-4-14 Amd.1 Ed.1.0 :2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test | 〇 |
IEC 61000-4-14 Amd.2 Ed.1.0 :2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase | 〇 |
IEC 61000-4-15 Ed.2.0 :2010 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | 〇 |
IEC 61000-4-16 Ed.1.0 :1998 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 〇 |
IEC 61000-4-16 Amd.1 Ed. 1.0 :2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 〇 |
IEC 61000-4-16 Amd.2 Ed. 1.0 :2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 〇 |
IEC 61000-4-16 Ed.2.0 :2015 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 〇 |
IEC 61000-4-17 Ed.1.0 :1999 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | 〇 |
IEC 61000-4-17 Amd.1 Ed.1.0 :2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | 〇 |
IEC 61000-4-17 Amd.2 Ed.1.0 :2008 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test | 〇 |
IEC 61000-4-20 Ed.2.0 :2010 | Electromagnetic compatiility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
IEC 61000-4-20 Ed.3.0 : 2022 | 〇 | |
IEC 61000-4-23 Ed.1.0 :2000 | Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | 〇 |
IEC 61000-4-23 Ed.2.0 :2016 | ||
IEC 61000-4-24 Ed.1.0 :1997 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC Publication | 〇 |
IEC 61000-4-24 Ed.2.0 :2015 | Electromagnetic compatibility (EMC) - Part 4-24 : Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance - Basic EMC Publication | |
IEC 61000-4-27 Ed.1.0 :2000 | Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test | 〇 |
IEC 61000-4-27 Amd.1 Ed.1.0 :2009 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | 〇 |
IEC 61000-4-28 Ed.1.0 :1999 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | 〇 |
IEC 61000-4-28 Amd.1 Ed. 1.0 :2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test | 〇 |
IEC 61000-4-28 Amd.2 Ed. 1.0 :2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase | 〇 |
IEC 61000-4-29 Ed.1.0 :2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | 〇 |
IEC/TR 61000-4-32 Ed.1.0 :2002 | Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium | 〇 |
IEC 61000-4-33 Ed.1.0 :2005 | Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters | 〇 |
IEC 61000-4-34 Ed.1.0 :2005 | Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase | 〇 |
IEC 61000-4-34 Amd.1 Ed.1.0 :2009 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmentwith mains current more than 16 A per phase | 〇 |
IEC/TR 61000-5-1 Ed.1.0 :1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication | 〇 |
IEC/TR 61000-5-2 Ed.1.0 :1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling | 〇 |
IEC/TR 61000-5-3 Ed.1.0 :1999 | Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts | 〇 |
IEC/TS 61000-5-4 Ed.1.0 :1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4: Immunity to HEMP - Specifications for protective devices against HEMP radiated disturbance. Basic EMC Publication | 〇 |
IEC 61000-5-5 Ed.1.0 :1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication | 〇 |
IEC/TR 61000-5-6 Ed.1.0 :2002 | Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences | 〇 |
IEC 61000-5-7 Ed.1.0 :2001 | Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) | 〇 |
IEC 61000-6-1 Ed.2.0 :2005 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments | 〇 |
IEC 61000-6-1 Ed.3.0 :2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity Standard for residential, commercial and light-industrial environments | 〇 |
IEC 61000-6-2 Ed.2.0 :2005 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments | 〇 |
IEC 61000-6-2 Ed.3.0 :2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments | 〇 |
IEC 61000-6-3 Ed.2.0 :2006 | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | 〇 |
IEC 61000-6-3 Amd.1 Ed.2.0 :2010 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | 〇 |
IEC 61000-6-3 Ed.3.0 :2020 | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | 〇 |
IEC 61000-6-4 Ed.2.0 :2006 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | 〇 |
IEC 61000-6-4 Amd.1 Ed.2.0 :2010 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | 〇 |
IEC 61000-6-4 Ed.3.0 :2018 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | 〇 |
IEC/TS 61000-6-5 Ed.1.0 :2001 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments | 〇 |
IEC 61000-6-5 Ed.1.0 :2015 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments | 〇 |
IEC 61000-6-6 Ed.1.0 :2003 | Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment | 〇 |
IEC 61010-1 Ed.3.0 :2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 〇 |
IEC 61010-1 Amd.1 Ed.3.0 :2016(b) | Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 〇 |
IEC 61326-1 Ed.2.0 :2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | 〇 |
IEC 61326-1 Ed.3.0 :2020 | 〇 | |
IEC 61326-2-1 Ed.2.0 :2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications | 〇 |
IEC 61326-2-1 Ed.3.0 :2020 | 〇 | |
IEC 61326-2-2 Ed.2.0 :2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | 〇 |
IEC 61326-2-2 Ed.3.0 :2020 | 〇 | |
IEC 61326-2-3 Ed.2.0 :2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | 〇 |
IEC 61326-2-3 Ed.3.0 :2020 | 〇 | |
IEC 61326-2-6 Ed.2.0 :2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | 〇 |
IEC 61326-2-6 Ed.3.0 :2020 | 〇 | |
IEC 61373 Ed.2.0 :2010 | Railway applications - Rolling stock equipment - Shock and vibration tests | |
IEC 61558-2-1 Ed.2.0 :2007 (b) | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | 〇 |
IEC 61558-2-1 Ed.3.0 :2021 | 〇 | |
IEC 62133-2 Ed.1.0 :2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications - Part 2:Lithium systems | 〇 |
IEC 62133-2 Amd.1 Ed.1.0 :2021 | Amendment 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications - Part 2:Lithium systems | 〇 |
IEC 62304 Ed.1.0 :2006 | Medical device software - Software life cycle processes | 〇 |
IEC 62304 Amd.1 Ed.1.0 :2015 | Amendment 1 - Medical device software - Software life cycle processes | 〇 |
IEC 62321 Ed.1.0 :2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | 〇 |
IEC 62321-1 Ed.1.0 :2013 | Determination of certain substances in electrotechnical products - Part1:Introduction and overview | 〇 |
IEC 62321-2 Ed.1.0 :2013 | Determination of certain substances in electrotechnical products - Part2:Disassembly,disjointment and mechanical sample preparation | 〇 |
IEC 62321-2 Ed.2.0 :2021 | 〇 | |
IEC 62321-3-1 Ed.1.0 :2013 | Determination of certain substances in electrotechnical products - Part3-1:Screening - Lead,mercury,cadmium,total chromium and total bromine by X-ray fluorescence spectrometry | 〇 |
IEC 62321-8 Ed.1.0 :2017 | Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py-TD-GC-MS) | 〇 |
IEC 62333-1 Ed.1.0 :2006 | Noise suppression sheet for digital devices and equipment - Part 1:Definitions and general properties | |
IEC 62333-2 Ed.1.0 :2006 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods | |
IEC 62333-2 Amd.1 Ed. 1.0 :2015 | Amendment 1 - Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods | |
IEC 62368-1 Ed.2.0 :2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements | 〇 |
IEC 62368-1 Ed.3.0 :2018 | 〇 | |
IEC 62471 Ed.1.0 :2006 | Photobiological safety of lamps and lamp systems | |
IEC/TR 62471-2 Ed.1.0 :2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety | |
IEC/PAS 62596 Ed.1.0 :2009 | Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines | 〇 |
IEC 82079-1 Ed.1.0 :2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements | 〇 |
IEC/IEEE 82079-1 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements | 〇 |
ISO規格
規格番号 | タイトル | 翻訳 |
---|---|---|
ISO 1463 :2003 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method | |
ISO 1463 :2021 | ||
ISO 1519 :2011 | Paints and varnishes - Bend test (cylindrical mandrel) | |
ISO 1520 :2006 | Paints and varnishes - Cupping test | |
ISO 2135 :2010 | Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light | |
ISO 2135 :2017 | ||
ISO 2177:2003 | Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution | |
ISO 2233 :2000 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing | |
ISO 2234 :2000 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load | |
ISO 2409 :2007 | Paints and varnishes - Cross-cut test | |
ISO 2409 :2013 | ||
ISO 2409 :2020 | ||
ISO 2808:2007 | Paints and varnishes - Determination of film thickness | |
ISO 2808:2019 | ||
ISO 2812-1 :2007 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water | |
ISO 2812-1 :2017 | ||
ISO 2813:1994 | Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees | |
ISO 2813 :2014 | Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees | |
ISO 2884-1 :1999 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear | |
ISO 2884-2 :2003 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed | |
ISO 3248:1998 | Paints and varnishes - Determination of the effect of heat | |
ISO 3248:2016 | ||
ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods | |
ISO 3741 :2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms | |
ISO 3744 :2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane | 〇 |
ISO 3917:1999 | Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering | |
ISO 3917:2016 | ||
ISO 4287:1997 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | |
ISO 4287:1997/ Amd1 :2009 | Amendment 1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | |
ISO 4288:1996 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture | |
ISO 4624 :2002 | Paints and varnishes - Pull-off test for adhesion | |
ISO 4624 :2016 | ||
ISO 4662 :2009 | Rubber, vulcanized or thermoplastic - Determination of rebound resilience | |
ISO 4662 :2017 | ||
ISO 4892-1 :1999 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance | |
ISO 4892-1 :2016 | ||
ISO 4892-2 :2006 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
ISO 4892-2 :2006/ Amd 1 :2009 | Amendment 1 - Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
ISO 4892-2 :2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
ISO4892-2 :2013/ Amd.1 :2021 | Amendment 1 - Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
ISO 4892-4 :2004 | Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps | |
ISO 4892-4 :2013 | ||
ISO 6270-1 :1998 | Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation | |
ISO 6270-1 :2017 | Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation(single-sided exposure) | |
ISO 6270-2 :2005 | Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres | |
ISO 6270-2 :2017 | Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation(in-cabinet exposure with heated water reservoir) | |
ISO 6272-1 :2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter | |
ISO 6272-2 :2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter | |
ISO 6507-1 :2005 | Metallic materials - Vickers hardness test - Part 1: Test method | |
ISO 6507-1 :2018 | ||
ISO 6507-4 :2005 | Metallic materials - Vickers hardness test - Part 4: Tables of hardness values | |
ISO 6507-4 :2018 | ||
ISO 6508-1 :2005 | Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) | |
ISO 6508-1 :2016 | Metallic materials - Rockwell hardness test - Part 1: Test method | |
ISO 6892-1 :2009 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature | |
ISO 6892-1 :2016 | ||
ISO 6892-1 :2019 | ||
ISO 6892-2 :2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature | |
ISO 6892-2 :2018 | ||
ISO 7637-3 :2007 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 〇 |
ISO 7637-3 :2016 | 〇 | |
ISO 7668:2010 | Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees | |
ISO 7668:2018 | ||
ISO 7668:2021 | ||
ISO 7724-2 :1984 | Paints and varnishes - Colorimetry - Part 2: Colour measurement | |
ISO 7784-2 : 1997 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method | |
ISO 7784-2 : 2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen | |
ISO 7784-3 : 2000 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method | |
ISO 7784-3 : 2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive- paper covered wheel and linearly reciprocating test specimen | |
ISO 8318 : 2000 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency | |
ISO 9000 : 2015 | Quality management systems - Fundamentals and vocabulary | 〇 |
ISO 9227:2012 | Corrosion tests in artificial atmospheres - Salt spray tests | 〇 |
ISO 9227:2017 | 〇 | |
ISO 10062 :2006 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) | |
ISO 10605 :2008 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | 〇 |
ISO 10605 : 2008/ Amd1 : 2014 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | 〇 |
ISO 10993-1 : 2018 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process | 〇 |
ISO 11201 : 2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections | 〇 |
ISO 11341 : 2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation | |
ISO 11452-1 : 2005 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | 〇 |
ISO 11452-1 : 2005/ Amd 1 : 2008 | Amendment 1 - Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology-Amendment 1 | 〇 |
ISO 11452-1 : 2015 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology-Amendment 1 | 〇 |
ISO 11452-3 : 2001 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM) cell | 〇 |
ISO 11452-3 : 2016 | 〇 | |
ISO 11452-4 : 2011 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods | 〇 |
ISO 11452-4 : 2020 | 〇 | |
ISO 11997-1 : 2005 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity | |
ISO 11997-1 : 2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid | |
ISO 11997-2 : 2000 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light | |
ISO 11997-2 : 2013 | ||
ISO 12100 : 2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction | 〇 |
ISO 13320 : 2009 | Particle size analysis - Laser diffraction methods | |
ISO 13320 : 2020 | ||
ISO 13355 : 2001 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test | |
ISO 13355 : 2016 | ||
ISO 13849-1 : 2006 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design | 〇 |
ISO 13849-1 : 2015 | 〇 | |
ISO 13849-2 : 2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation | 〇 |
ISO 14001 : 2015 | Environmental management systems - Requirements with guidance for use | 〇 |
ISO 14253-1 : 1998 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications | |
ISO 14253-1 : 2017 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications | |
ISO 14253-2 : 2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification | |
ISO 14782 : 1999 | Plastics - Determination of haze for transparent materials | |
ISO 14782 : 2021 | ||
ISO 14971 : 2007 | Medical devices - Application of risk management to medical devices | 〇 |
ISO 14971 : 2019 | ||
ISO 15184 : 2012 | Paints and varnishes - Determination of film hardness by pencil test | |
ISO 15184 : 2020 | ||
ISO 16128-1 : 2016 | Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products -- Part 1: Definitions for ingredients | 〇 |
ISO 16128-2 : 2017 | Cosmetics -- Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients -- Part 2: Criteria for ingredients and products | 〇 |
ISO 16128-2:2017 / Amd 1 : 2022 | 〇 | |
ISO 16474-1 : 2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 1:General guidance | |
ISO 16474-2 : 2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
ISO 17100 : 2015 | Translation Services. Requirements for translation services | 〇 |
ISO17100 :2015/Amd1 :2017 | Translation Services. Requirements for translation services | 〇 |
ISO 17398:2004 | Safety colours and safety signs - Classification, performance and durability of safety signs |
|
ISO 20607:2019 | Safety of machinery - Instruction handbook -- General drafting principles | 〇 |
ISO 21920-2 : 2021 | Amendment 1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | 〇 |
ISO 21920-3:2021 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture | 〇 |
ISO 22716:2007 | Cosmetics - Good Manufacturing Practices (GMP) -- Guidelines on Good Manufacturing Practices | 〇 |
ISO 24444 :2019 | Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) | 〇 |
ISO 24444 : 2019 / Amd 1 : 2022 | 〇 |
ISO/IEC GUIDE
規格番号 | タイトル | 翻訳 |
---|---|---|
ISO/IEC Guide51 : 1999 | Safety aspects - Guidelines for their inclusion in standards | 〇 |
ISO/IEC Guide51 : 2014 | 〇 |
MIL規格
規格番号 | タイトル | 翻訳 |
---|---|---|
MIL-A-8625F :1993 | Anodic Coatings for Aluminum and Aluminum Alloys | 〇 |
MIL-A-8625F Amendment 1 :2003 | ||
MIL-A-8625F Amendment 1 :2003 Valid Notice1 :2019 | ||
MIL-PRF-8625F Amendment 2 :2020 | ||
MIL-DTL-5541F :2006 | Chemical Conversion Coatings on Aluminum and Aluminum alloys | |
MIL-DTL-5541F :2006 Valid Notice1 :2019 | ||
MIL-DTL-13924D Notice1 :2003 | Coating, Oxide, Black, for Ferrous Metals | |
MIL-DTL-13924E:2018 | ||
MIL-DTL-14538D Amendment1 :2011 | Chromium Plating, Black (Electrodeposited) | |
MIL-DTL-14538D Notice1 :2016 | ||
MIL-DTL-5002E :2011 | Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems | |
MIL-DTL-5002E :2016 | ||
MIL-DTL-81706B Amendment1 :2006 | Chemical Conversion Meterials for Coating Aluminum and Aluminum alloys | |
MIL-DTL-81706B Amendment1 :2006 Valid Notice1 : 2019 | ||
MIL-PRF-23377K :2012 | Primer Coatings : Epoxy, High-Solids | |
MIL-PRF-23377K :2012 Valid Notice1 : 2019 | ||
MIL-PRF-85582E :2012 | Primer Coatings : Epoxy, Waterborne | |
MIL-PRF-85582E :2012 Valid Notice1 : 2019 | ||
MIL-STD-810G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS | |
MIL-STD-810G:2014 | ||
MIL-STD-810H:2019 | ||
MIL-STD-1916 Notice2 : 2014 | DOD Preferred Methods for Acceptance of Product |
AS規格
規格番号 | タイトル | 翻訳 |
---|---|---|
AS9003 Rev.A :2012 | (R)Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations |
CID規格
規格番号 | タイトル | 翻訳 |
---|---|---|
CID A-A-59105B Notice2 : 2014 | Nitric Acid, Technical | |
CID A-A-59105B Notice3 :2019 | ||
CID A-A-59123 Notice2 : 2011 | Sodium Dichromate Dihydrate, Technical | |
CID A-A-59123 Notice3 :2016 |
FED規格
規格番号 | タイトル | 翻訳 |
---|---|---|
FED-STD-141D :2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing | |
FED-STD-313E :2014 | Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities | |
FED-STD-313F :2018 | Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities |
JIS規格
規格番号 | タイトル |
---|---|
JIS C 0511-1 : 2008 | 機能安全―プロセス産業分野の安全計装システム―第1部:フレームワーク,定義及びシステム・ハードウェア・ソフトウェアの要求事項 |
JIS C 0511-1 : 2019 | 機能安全―プロセス産業分野の安全計装システム―第1部:フレームワーク,定義及びシステム・ハードウェア・ソフトウェアの要求事項 |
JIS Z 7253 : 2019 | GHSに基づく化学品の危険有害性情報の伝達方法-ラベル、作業場内の表示および安全データシート |
JEITA規格
規格番号 | タイトル |
---|---|
JEITA ET-7407A | CSP及びBGAパッケージの実装状態でのはんだ接合部の耐久性試験方法 |
JEITA EDR-4703A | ベアダイの品質ガイドライン |
EIAJ ED-4703 | 半導体デバイスの工程内評価及び構造解析方法 |
EIAJ ED-4703-1 | 半導体デバイスの工程内評価及び構造解析方法(追補1) |
JASO規格
規格番号 | タイトル |
---|---|
JASO | 日本の自動車規格DVD--ROM(2011)[日本語版]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
JASO | 日本の自動車規格DVD--ROM(2012)[日本語版]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
JASO | 日本の自動車規格DVD--ROM(2016)[日本語版]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
JASO | 日本の自動車規格DVD--ROM(2017)[日本語版]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
JASO | 日本の自動車規格 DVD-ROM(2018)[日本語版 ]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
JASO | 日本の自動車規格 DVD-ROM(2019)[日本語版 ]-公益社団法人自動車技術会・一般財団法人日本規格協会/共同制作日本語 |
NAS規格
規格番号 | タイトル | 翻訳 |
---|---|---|
NAS 410 Rev.4 :2014 | NAS Certification & Qualification of Nondestructive Test Personnel | |
NAS 410 Rev.5 :2020 | ||
NAS M1312 Rev.1 :2012 | Fastener Test Methods | |
NAS M1312-5 Rev.1 :2012 | Fastener Test Methods Method 5 Stress Durability |
SJAC規格
規格番号 | タイトル | 翻訳 |
---|---|---|
SJAC 9101E :2014 | 品質マネジメント・システムの評価 - 航空、宇宙及び防衛分野の組織に対する審査要求事項 (Quality Management Systems - Audit Requirements for Aviation, Space, and Defense Organizations) | 〇 |
SJAC 9101F :2016 | 〇 | |
SJAC 9102B :2015 | 航空宇宙 初回製品検査要求事項 (Aerospace First Article Inspection Requirement) | 〇 |
SJAC 9103A :2013 | 航空宇宙 キー特性管理 (Variation Management of Key Characteristics) | 〇 |
SJAC 9131A :2014 |
航空宇宙-品質マネジメントシステム - 不適合データの定義及び文書
| 〇 |
SJAC 9131B :2019 | 〇 | |
SJAC 9162 : 2006 | 作業者による自主確認プログラム (Aerospace Operator Self-Verification Programs) | 〇 |
SJAC 9162A :2017 | 〇 |
SVRP規格
規格番号 | タイトル | 翻訳 |
---|---|---|
SAE J423 Reaf.FEB1998 | Methods of Measuring Case Depth |