2026年度

クリックで詳細が開きます。

1.照明・撮像システムおよび画像処理プロセスによる強化ガラスの起点部を含む破片探索の高効率化 
2.Effect of Filler Size on Porosity of Porous Parts Obtained Via PBF-LB/P and Filler Dissolution
  • 著者:藤井紘一、木暮尊志、小林隆一、山内友貴
  • 出版社などの名称:University of Texas at Austin
  • 誌名:Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium 
  • DOI:10.26153/tsw/63498(外部リンク)
3.Effects of the optical properties of powder beds on part strength for various layer thicknesses in laser-based powder bed fusion for polymers
4.Effect of Particle Size on Optical Properties of Powder Bed with NearInfrared Laser for Large Scale Powder Bed Fusion Process in Polymer
  • 著者:山内友貴、藤井紘一、木暮尊志、淺野友軌
  • 出版社などの名称:University of Texas at Austin
  • 誌名:Proceedings of the 36th Annual International Solid Freeform Fabrication Symposium
  • DOI:10.26153/tsw/63499(外部リンク)
5.電磁波照射による伝送線路の誘導電圧に基づく近接照射法の提案
6.Quantitative Morphological Analysis of Rust Streak Formation and Underlying Substrate Profile Changes Under Controlled Droplet Supply
  • 著者:石田祐也、野坂敦史、清水 綾、山田麻祐子 ほか3名
  • 出版社などの名称:MDPI
  • 誌名:Corrosion and Materials Degradation
  • DOI:10.3390/cmd7020031(外部リンク)
7.Microstructural control of cast and 3D printed aluminum using Al3Ti heterogeneous nucleation site single crystal
8.High-temperature capacitance stability and insulating properties of PNb9O25 synthesized via liquid-phase sintering: Strategic utilization of glass-oxide interfacial reactions
9.Pressure-sensing films with enhanced pressure responsivity: Cellulose microfiber films containing mechanochromic fluorenylidene-acridane
10.Functional Characteristics and Coating Applications of Paramylon/Silk Composite Fibers Prepared via Water-Jet Defibrillation
11.Forming of in-plane bending parts by bending and compression processes using raw materials with square cross-section
  • 著者:村岡 剛、奥出裕亮、片桐 嵩 ほか2名
  • 出版社などの名称:(一社)日本機械学会
  • 誌名:The 11th International Conference on Leading Edge Manufacturing in 21st Century
  • DOI:10.1299/jsmelem.2025.11.OS08-8(外部リンク)
12.余盛付き試験体のデジタルラジオグラフィにおける散乱線の影響解析
13.Balancing Consistency and Diversity in Automated C Code Generation for Software Defect Detectors
14.Consideration of part deformation in PBF-LB/P without relying on the conventional process window: a low-temperature process below the crystallization temperature measured by DSC
15.WRD750 Double Ridge Waveguide for High-Power Microwave Transmission Using Additive Manufacturing and Plastic Plating Technology
16.Experimental estimation of extremity doses from handheld XRF devices during radiation exposure incidents
17.非言語ユーザインタフェースと拡張現実を用いた避難支援システムの試作検証
  • 著者:阿部真也、吉次なぎ ほか1名
  • 出版社などの名称:(一社)電気学会
  • 誌名:電気学会論文誌C(電子・情報・システム部門誌)
  • DOI:10.1541/ieejeiss.146.783(外部リンク)
18.Pilot Study of Movement Characteristics During Walker Use in Children with Walking Disabilities
19.コーティング材を用いたCFRPへの無電解ニッケルめっきの前処理
  • 著者:小野澤明良、桑原聡士、佐熊範和
  • 出版社などの名称:(一社)日本材料科学会
  • 誌名:材料の科学と工学
20.Enhancing Hardness and Wear Performance of Diamond-Like Carbon Films through Substrate Cooling during HiPIMS Deposition
  • 著者:徳田祐樹、齋藤庸賀、寺西義一 ほか4名
  • 出版社などの名称:(一社)日本トライボロジー学会
  • 誌名:Tribology Online
  • DOI:10.2474/trol.21.250(外部リンク)
21.Evaluation of Roughness Perception Based on Friction Amplitude in Spatial Frequency Domain under Sinusoidal Reciprocating Motion
  • 著者:齋藤庸賀、吉次なぎ、村井まどか、唐木由佑、山田 巧、佐々木直里、福原悠太 ほか2名
  • 出版社などの名称:(一社)日本トライボロジー学会
  • 誌名:Tribology Online
  • DOI:10.2474/trol.21.259(外部リンク)
チャットで相談