'%3e%3cpath%20id='パス_332'%20data-name='パス%20332'%20d='M4,5h8.375'%20transform='translate(-4%20-3.804)'%20fill='none'%20stroke='%23324eb3'%20stroke-linecap='round'%20stroke-linejoin='round'%20stroke-width='1.5'/%3e%3cpath%20id='パス_333'%20data-name='パス%20333'%20d='M7,4c0,5.8,0,8.375.6,9.571'%20transform='translate(-3.411%20-4)'%20fill='none'%20stroke='%23324eb3'%20stroke-linecap='round'%20stroke-linejoin='round'%20stroke-width='1.5'/%3e%3cpath%20id='パス_334'%20data-name='パス%20334'%20d='M11.178,8.6c0,2.735-2.393,5.384-4.187,5.384A2.855,2.855,0,0,1,4,11.589Q4,8,7.589,8c2.393,0,5.982.682,5.982,3.418a3.75,3.75,0,0,1-2.393,3.76'%20transform='translate(-4%20-3.214)'%20fill='none'%20stroke='%23324eb3'%20stroke-linecap='round'%20stroke-linejoin='round'%20stroke-width='1.5'/%3e%3cpath%20id='パス_335'%20data-name='パス%20335'%20d='M12,21.767,16.786,11l4.786,10.767'%20transform='translate(-2.429%20-2.625)'%20fill='none'%20stroke='%23324eb3'%20stroke-linecap='round'%20stroke-linejoin='round'%20stroke-width='1.5'/%3e%3cpath%20id='パス_336'%20data-name='パス%20336'%20d='M20.318,18H12.9'%20transform='translate(-2.252%20-1.251)'%20fill='none'%20stroke='%23324eb3'%20stroke-linecap='round'%20stroke-linejoin='round'%20stroke-width='1.5'/%3e%3c/g%3e%3c/svg%3e){kind=small}
English 海外規格閲覧サービスについて
都産技研本部に設置している専用端末（ライブラリーサーバー）で、BS EN の全規格を検索および閲覧いただくことができます。
また、お客さまからのニーズの高い規格書は印刷版（冊子）をご用意しており、原本および翻訳版を閲覧いただくことができます。
※閲覧は、事前予約制 となっております。
閲覧場所は 都産技研本部（東京都江東区青海2-4-10）です。
海外規格に関する参考情報
TIRI NEWS 2024年2月1日公開
CEマーキングで使用する整合規格（EN規格）の調べ方と規格番号が示す意味
ご利用の流れ
- MTEP相談予約フォーム（外部リンク） にてお申込みください。 （相談申込用のフォームですが、以下の通りご入力ください）
- ご相談件名に「海外規格閲覧」、ご相談内容に「閲覧希望の規格番号」をご記載ください
- 担当者から来所の日程調整について、ご連絡をさせていただだきます。
- 当日は、お客様が閲覧いただく規格書の準備をいたしますので、 ご案内のお時間にご来所くださいますよう、ご協力をお願いいたします。
Web閲覧できる海外規格
東京都立産業技術センター本部内に設置の専用端末にて検索・閲覧がご利用いただけます。
- BS EN 全規格
※保存・印刷はできません。
冊子にて閲覧できる海外規格
次の海外規格を配架しています。
「翻訳」欄に〇がついている規格は、翻訳版を配架しています。
※複写については 図書室のご案内 をご覧ください。
AMS規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| AMS 03-2：2015 | Cleaning and Preparation of Metal Surfaces |
|
| AMS 03-2 Rev.A：2017 | Cleaning and Preparation of Metal Surfaces |
|
| AMS 03-2 Rev.B：2019 | Cleaning and Preparation of Metal Surfaces |
|
| AMS 2269 Rev.F：2012 | Chemical Check Analysis Limits,Nickel,Nickel Alloys,and Cobalt Alloys |
|
| AMS 2371 Rev.J：2015 | Quality Assurance Sampling and Testing,Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Foring Stock |
|
| AMS 2371 Rev.K：2016 | Quality Assurance Sampling and Testing,Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Foring Stock |
|
| AMS 2371 Rev.L：2019 | Quality Assurance Sampling and Testing,Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Foring Stock |
|
| AMS 2403 Rev.N：2015 | Plating, Nickel, General Purpose |
|
| AMS 2403 Rev.R：2021 | Plating, Nickel, General Purpose |
|
| AMS 2406 Rev.N：2015 | Plating, Chromium, Hard Deposit |
|
| AMS 2406 Rev.P：2020 | Plating, Chromium, Hard Deposit |
|
| AMS 2418 Rev.H：2011 | Plating, Copper |
|
| AMS 2418 Rev.J：2017 | Plating, Copper |
|
| AMS 2430 Rev.T：2015 | Shot Peening, Automatic |
|
| AMS 2430 Rev.U：2018 | Shot Peening |
|
| AMS 2438 Rev.E：2015 | (R) Plating, Chromium Thin, Hard, Dense Deposit |
|
| AMS 2460 Rev.A：2013 | Plating, Chromium |
|
| AMS 2469 Rev.J：2014 | Hard Anodic Coating on Aluminum and Aluminum Alloys |
|
| AMS 2471 Rev.H：2014 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Undyed Coating |
|
| AMS 2471 Rev.J：2020 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Undyed Coating |
|
| AMS 2472 Rev.G：2014 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Dyed Coatings |
|
| AMS 2472 Rev.H：2020 | Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Dyed Coatings |
|
| AMS 2473 Rev.H：2013 | Chemical Film Treatment for Aluminum Alloys, General Purpose Coating |
|
| AMS 2473 Rev.J：2020 | Chemical Film Treatment for Aluminum Alloys, General Purpose Coating |
|
| AMS 2474 Rev.D：2013 | Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating |
|
| AMS 2474 Rev.E：2019 | Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating |
|
| AMS 2477 Rev.A：2010 | Conversion Coating for Aluminum Alloys, Low Electrical Resistance Coating |
|
| AMS 2477 Rev.D：2019 | Conversion Coating for Aluminum Alloys, Low Electrical Resistance Coating |
|
| AMS 2486 Rev.E：2010 | Conversion Coating of Titanium Alloys, Fluoride-Phosphate Type |
|
| AMS 2488 Rev.D：2011 | Anodic Treatment-Titanium and Titanium Alloys,Solution pH 13 or Higher |
|
| AMS 2488 Rev.E：2019 | Anodic Treatment-Titanium and Titanium Alloys,Solution pH 13 or Higher |
|
| AMS 2658 Rev.C：2009 | Hardness and Conductivity Inspection of Wrought Aluminium Alloy Parts |
|
| AMS 2658 Rev.D：2016 | Hardness and Conductivity Inspection of Wrought Aluminium Alloy Parts |
|
| AMS 2700 Rev.E：2011 | Passivation of Corrosion Resistant Steels |
|
| AMS 2700 Rev.F：2018 | Passivation of Corrosion Resistant Steels |
|
| AMS 2750 Rev.E：2012 | (R) Pyrometry | ○ |
| AMS 2750 Rev.F：2020 | (R) Pyrometry | ○ |
| AMS 2757 Rev.B：2010 | Gaseous Nitrocarburizing |
|
| AMS 2757 Rev.C：2019 | Gaseous Nitrocarburizing |
|
| AMS 2759 Rev.E：2014 | Heat Treatment of Steel Parts, General Requirements |
|
| AMS 2759 Rev.G：2019 | Heat Treatment of Steel Parts, General Requirements | ○ |
| AMS 2759/1 Rev.E：2014 | Heat Treatement of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strenght Below 220 ksi(1517 MPa) |
|
| AMS 2759/1 Rev.H：2019 | Heat Treatement of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strenght Below 220 ksi(1517 MPa) |
|
| AMS 2759/1 Rev.J：2021 | Heat Treatement of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strenght Below 220 ksi(1517 MPa) |
|
| AMS 2759/2 Rev.F：2014 | Heat Treatement of Low-Alloy Steel Parts, Minimum Tensile Strenght 220 ksi(1517 MPa) and Higher |
|
| AMS 2759/2 Rev.J：2019 | Heat Treatement of Low-Alloy Steel Parts, Minimum Tensile Strenght 220 ksi(1517 MPa) and Higher |
|
| AMS 2759/2 Rev.K：2021 | Heat Treatement of Low-Alloy Steel Parts, Minimum Tensile Strenght 220 ksi(1517 MPa) and Higher |
|
| AMS 2759/3 Rev.F：2015 | Heat Treatement Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts |
|
| AMS 2759/3 Rev.H：2019 | Heat Treatement Precipitation-Hardening, Corrosion-Resistant, Maraging and Secondary Hardening Steel Parts |
|
| AMS 2759/3 Rev.J：2020 | Heat Treatement Precipitation-Hardening, Corrosion-Resistant, Maraging and Secondary Hardening Steel Parts |
|
| AMS 2759/4 Rev.C：2014 | Heat Treatement, Austenitic Corrosion-Resistant Steel Parts |
|
| AMS 2759/4 Rev.D：2018 | Heat Treatement, Austenitic Corrosion-Resistant Steel Parts |
|
| AMS 2759/5 Rev.D：2014 | Heat Treatment Martensitic Corrosion-Resistant Steel Parts |
|
| AMS 2759/5 Rev.E：2018 | Heat Treatment Martensitic Corrosion-Resistant Steel Parts |
|
| AMS 2759/5 Rev.F：2020 | Heat Treatment Martensitic Corrosion-Resistant Steel Parts |
|
| AMS 2759/6 Rev.B：2014 | Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts |
|
| AMS 2759/6 Rev.C：2018 | Gas Nitriding of Low-Alloy Steel Parts |
|
| AMS 2759/7 Rev.B：2014 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts |
|
| AMS 2759/7 Rev.D：2019 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts |
|
| AMS 2759/7 Rev.E：2021 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts |
|
| AMS 2759/9 Rev.D：2009 | Hydrogen Embrittlement Relife(Baking)of Steel Parts |
|
| AMS 2759/9 Rev.E：2018 | Hydrogen Embrittlement Relife(Baking)of Steel Parts |
|
| AMS 2759/10 Rev.A：2014 | Automated Gaseous Nitriding Controlled by Nitriding Potential |
|
| AMS 2759/10 Rev.B：2018 | (R)Automated Gaseous Nitriding Controlled by Nitriding Potential |
|
| AMS 2759/11：2014 | Stress Relief of Steel Parts |
|
| AMS 2759/11 Rev.A：2018 | (R)Stress Relief of Steel Parts |
|
| AMS 2759/12 Rev.A：2007 | Gaseous Nitrocarburizing, Automatically Controlled by Potentials |
|
| AMS 2759/12 Rev.B：2018 | (R)Automated Gaseous Nitrocarburizing Controlled by Potentials |
|
| AMS 2769 Rev.B：2014 | Heat Treatment of Parts in a Vacuum |
|
| AMS 2769 Rev.C：2019 | (R)Heat Treatment of Parts in a Vacuum |
|
| AMS 2769 Rev.D：2020 | Heat Treatment of Parts in a Vacuum |
|
| AMS 2770 Rev.N：2015 | Heat Treatment of Wrought Aluminium Alloy Parts |
|
| AMS 2770 Rev.P：2019 | Heat Treatment of Wrought Aluminium Alloy Parts | ○ |
| AMS 2770 Rev.R：2020 | Heat Treatment of Wrought Aluminium Alloy Parts |
|
| AMS 2771 Rev.E：2013 | Heat Treatment of Aluminium Alloy Castings |
|
| AMS 2771 Rev.F：2017 | Heat Treatment of Aluminium Alloy Castings |
|
| AMS 2772 Rev.F：2011 | Heat Treatment of Aluminium Alloy Raw Materials |
|
| AMS 2772 Rev.G：2016 | Heat Treatment of Aluminium Alloy Raw Materials |
|
| AMS 2773 Rev.E：2013 | Heat Treatment, Cast Nickel Alloy and Cobalt Alloy Parts |
|
| AMS 2774 Rev.E：2016 | Heat Treatment, Wrought Nickel Alloy and Cobalt Alloy Parts |
|
| AMS 2774 Rev.G：2020 | Heat Treatment, Wrought Nickel Alloy and Cobalt Alloy Parts |
|
| AMS 4027 Rev.N：2014 | Aluminium Alloy, Sheet and Plate, 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061;-T6Sheet,-T651Plate), Solution and Precipitation Heat Treated |
|
| AMS 4037 Rev.Q：2014 | Aluminum Alloy Sheet and Plate, 4.4Cu-1.5Mg-0.60Mn(2024;-T3 Flat Sheet, T351 Plate), Solution Heat Treated |
|
| AMS 4037 Rev.R：2020 | Aluminum Alloy Sheet and Plate, 4.4Cu-1.5Mg-0.60Mn(2024;-T3 Flat Sheet, T351 Plate), Solution Heat Treated |
|
| AMS 4166 Rev.G：2012 | Aluminium Alloy, Extrusions, 5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T73), Solution Heat Treated and Overaged |
|
| AMS 5528 Rev.H：2012 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr-7.1Ni-1.1Al, Solution Heat Treated, Precipitation Hardenable |
|
| AMS 5528 Rev.J：2019 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr-7.1Ni-1.1Al, Solution Heat Treated, Precipitation Hardenable |
|
| AMS 5529 Rev.J：2012 | Steel,Corrosion Resistant, Sheet and Strip, 17Cr-7.1Ni-1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.100 Inch(0.038 to 2.54mm) Nominal Thickness |
|
| AMS 5529 Rev.K：2019 | Steel,Corrosion Resistant, Sheet and Strip, 17Cr-7.1Ni-1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.100 Inch(0.038 to 2.54mm) Nominal Thickness |
|
| AMS 5662 Rev.M：2009 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775°F(968℃) Solution Heat Treated, Precipitation-Hardenable |
|
| AMS 5662 Rev.N：2016 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775°F(968℃) Solution Heat Treated, Precipitation-Hardenable |
|
| AMS 5663 Rev.M：2009 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775°F(968℃) Solution and Precipitation Heat Treated |
|
| AMS 5663 Rev.N：2016 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775°F(968℃) Solution and Precipitation Heat Treated |
|
| AMS 6415 Rev.T：2012 | Steel, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
|
| AMS 6415 Rev.U：2016 | Steel, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
|
| AMS 6491 Rev.E：2014 | Steel Bars, Forgings, and Tubing, 4.1Cr-4.2Mo-1.0V(0.80-0.85C)(M-50), Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted |
|
| AMS 6491 Rev.F：2018 | Steel Bars, Forgings, and Tubing, 4.1Cr-4.2Mo-1.0V(0.80-0.85C)(M-50), Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted |
|
| AMS-H-6875 Rev.B：2010 | Heat Treatment of Steel Raw Materials |
|
| AMS-H-7199 Rev.A：2013 | Heat Treatment of Wrought Copper-Beryllium Alloy, Process for (Copper Alloys： Numbers C17000, C17200, C17300, C17500, and C17510) |
|
| AMS-P-21600：1998 | Paint System, Fluorescent, Removable, for Aircraft Application |
|
| AMS-P-21600 Rev.A：2013 | (R)Paint System, Fluorescent, Removable, for Aircraft Application |
|
| AMS-P-21600 Rev.B：2019 | Paint System, Fluorescent, Removable, for Aircraft Application |
|
| AMS-QQ-A-250 Rev.A：2012 | Aluminum and Aluminum Alloy, Plate and Sheet General Specification for |
|
| AMS-QQ-A-250 Rev.B：2018 | Aluminum and Aluminum Alloy, Plate and Sheet General Specification for |
|
| AMS-QQ-A-250/4 Rev.B：2015 | Aluminum Alloy 2024, Plate and Sheet |
|
| AMS-QQ-C-320 Rev.B：2008 | Chromium Plating (Electrodeposited) |
|
| AMS-QQ-N-290 Rev.C：2015 | Nickel Plating (Electrodeposited) |
|
| AMS-QQ-P-35 Rev.A | Passivation Treatments for Corrosion-Resistant Steel (Cancelled Feb 2005) |
|
| AMS-S-6090 Rev.B | Steel Carburizing and Nitriding, Processes for (Cancelled May 2006) |
|
| AMS-STD-753 Rev.A：2012 | Corrosion-Resistant Steel Parts： Sampling, Inspection and Testing for Surface Passivation |
|
| AMS-STD-753 Rev.B：2017 | Corrosion-Resistant Steel Parts： Sampling, Inspection and Testing for Surface Passivation |
|
ANSI規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| ANSI/ASQ Z1.4-2003：R2013 | Sampling Procedures and Tables for Inspection by Attributes | |
| ANSI/RIA R15.06：2012 | American National Standard for industrial Robots and Robot Systems-Safety Requirements | |
| ANSI C63.4-2009 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | |
| ANSI C63.4-2014 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | |
| ANSI C63.4a-2017 | Methods Of Measurement Of Radio-Noise Emissions From Low-Voltage Electrical And Electronic Equipment In The Range Of 9 KHz To 40 GHz Amendment 1： Test Site Validation | |
| ANSI C63.5-2006 | Calibration Of Antennas Used For Radiated Emission Measurements In Electro Magnetic Interference | |
| ANSI C63.5-2017 | Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
ASTM規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| ASTM B117-11 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ○ |
| ASTM B117-16 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
|
| ASTM B117-19 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
|
| ASTM B487-85 (2007) | Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section |
|
| ASTM B487-20 | Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section |
|
| ASTM B499-09 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method： Nonmagnetic Coatings on Magnetic Basis Metals |
|
| ASTM B504-90 (2011) | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
|
| ASTM B556-90 (2007) | Standard Guide for Measurement of Thin Chromium Coatings by Spot Test |
|
| ASTM B556-90 (2013) | Standard Guide for Measurement of Thin Chromium Coatings by Spot Test |
|
| ASTM B567-98 (2009a) | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
|
| ASTM B567-98 (2014) | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
|
| ASTM B568-98 (2009) | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
|
| ASTM B568-98 (2014) | Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
|
| ASTM B571-97 (2008)e1 | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
|
| ASTM B571-97 (2013) | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
|
| ASTM B571-18 | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
|
| ASTM B578-87 (2009) | Standard Test Method for Microhardness of Electroplated Coatings |
|
| ASTM B578-87 (2015) | Standard Test Method for Microhardness of Electroplated Coatings |
|
| ASTM B578-21 | Standard Test Method for Microindentation Hardness of Electroplated Coatings |
|
| ASTM B748-90 (2010) | Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
|
| ASTM D822-01 (2006) | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
|
| ASTM D822/D822M-13 | Standard Practice For Filtered Open-Flame Carbon-Arc Exposures Of Paint And Related Coatings |
|
| ASTM D1499-05 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
|
| ASTM D1499-13 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
|
| ASTM D2244-11 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
|
| ASTM D2244-16 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
|
| ASTM D2244-21 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
|
| ASTM D3339-12 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
|
| ASTM D3339-21 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
|
| ASTM D3361-01 (2006) | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
|
| ASTM D3361/D3361M-13 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
|
| ASTM E3-11 | Standard Guide for Preparation of Metallographic Specimens |
|
| ASTM E8/E8M-11 | Standard Test Methods for Tension Testing of Metallic Materials |
|
| ASTM E8/E8M-15a | Standard Test Methods for Tension Testing of Metallic Materials | ○ |
| ASTM E8/E8M-16a | Standard Test Methods for Tension Testing of Metallic Materials |
|
| ASTM E8/E8M-16ae1 | Standard Test Methods for Tension Testing of Metallic Materials |
|
| ASTM E8/E8M-21 | Standard Test Methods for Tension Testing of Metallic Materials |
|
| ASTM E10-12 | Standard Test Method for Brinell Hardness of Metallic Materials |
|
| ASTM E10-15a | Standard Test Method for Brinell Hardness of Metallic Materials |
|
| ASTM E10-17 | Standard Test Method for Brinell Hardness of Metallic Materials |
|
| ASTM E10-18 | Standard Test Method for Brinell Hardness of Metallic Materials |
|
| ASTM E18-11 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
| ASTM E18-12 | Standard Test Methods for Rockwell Hardness of Metallic Materials | ○ |
| ASTM E18-15 | Standard Test Methods for Rockwell Hardness of Metallic Materials | ○ |
| ASTM E18-16 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
| ASTM E18-19 | Standard Test Methods for Rockwell Hardness of Metallic Materials | ○ |
| ASTM E18-20 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
| ASTM E21-09 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
|
| ASTM E21-17 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
|
| ASTM E21-17e1 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
|
| ASTM E21-20 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
|
| ASTM E23-07ae1 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ○ |
| ASTM E23-12c | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
|
| ASTM E23-16b | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
|
| ASTM E23-18 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
|
| ASTM E112-10 | Standard Test Methods for Determining Average Grain Size |
|
| ASTM E112-12 | Standard Test Methods for Determining Average Grain Size |
|
| ASTM E112-13 | Standard Test Methods for Determining Average Grain Size | ○ |
| ASTM E139-11 | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
|
| ASTM E384-11e1 | Standard Test Method for Knoop and Vickers Hardness of Materials |
|
| ASTM E384-16 | Standard Test Method for Microindentation Hardness of Materials | ○ |
| ASTM E384-17 | Standard Test Method for Microindentation Hardness of Materials |
|
| ASTM E498/E498M-11 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
| ASTM E930-99 (2007) | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
|
| ASTM E930-99 (2015) | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
|
| ASTM E930-18 | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
|
| ASTM E1181-02 (2008) | Standard Test Methods for Characterizing Duplex Grain Sizes |
|
| ASTM E1181-02 (2015) | Standard Test Methods for Characterizing Duplex Grain Sizes |
|
| ASTM F22-02 (2007) | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
|
| ASTM F22-13 | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
|
| ASTM F519-12 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
| ASTM F519-12a | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
| ASTM F519-13 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
| ASTM F519-17a | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
| ASTM F519-18 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
|
| ASTM F963-17 | Standard Consumer Safety Specification for Toy Safety |
|
| ASTM G151-10 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
|
| ASTM G151-19 | Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
|
| ASTM G152-05 | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
| ASTM G152-06 | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
| ASTM G152-13 | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
| ASTM G153-04 (2010) | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
| ASTM G153-13 | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
|
| ASTM Annualbook2015 | Section1,2,3,5,6,14,15 |
|
ARP規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| ARP 1755 Rev.B：2000 | Effect of Cleaning Agents on Aircraft Engine Materials, Stock Loss Test Method |
|
| ARP 1820 Rev.B：2012 | Chord Method of Evaluating Surface Microstructural Characteristics |
|
| ARP 1820 Rev.C：2021 | Chord Method of Evaluating Surface Microstructural Characteristics |
|
| ARP 1917 Rev.A：2013 | (R)Clarification of Terms Used in Aerospace Metals Specifications |
|
| ARP 1962 Rev.A：2007 | Training and Approval of Heat-Treating Personnel |
|
| ARP 1962 Rev.B：2019 | Training and Approval of Heat-Treating Personnel |
|
| ARP 4992 Rev.B：2012 | Periodic Test for Processing Solutions |
|
AWS規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| AWS D17.1/D17.1M：2010-AMD1 | Specification for Fusion Welding for Aerospase Applications |
|
| AWS D17.1/D17.1M：2017-AMD2 | Specification for Fusion Welding for Aerospase Applications |
|
CISPR規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| CISPR 11 Ed.5.0：2009 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 11 Ed.5.1：2010 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
|
| CISPR 11 Amd.1 Ed.5.0：2010 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 11 Ed.6.0：2015 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 11 Amd.1 Ed.6.0：2016 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 11 Amd.2 Ed.6.0：2019 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
|
| CISPR 11 Amd.2 Ed.6.0：2019 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 11 Ed.7.0：2024 (b) | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 12 Ed.6.0：2007 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | ○ |
| CISPR 12 Amd.1 Ed.6.0：2009 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | ○ |
| CISPR 12 Ed.6.1：2009 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
|
| CISPR 13 Ed.5.0：2009 | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 13 Amd.1 Ed.5.0：2015(b) | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 14-1 Ed.5.0：2005 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission | ○ |
| CISPR 14-1 Amd.1 Ed.5.0：2008 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission | ○ |
| CISPR 14-1 Amd.2 Ed.5.0：2011 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission | ○ |
| CISPR 14-1 Ed.5.2：2011 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission |
|
| CISPR 14-1 Ed.6.0：2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission | ○ |
| CISPR 14-1 Ed.7.0：2020 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1： Emission | ○ |
| CISPR 14-2 Ed.1.1：2001 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2： Immunity - Product family standard | ○ |
| CISPR 14-2 Amd.2 Ed.1.1：2008 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2： Immunity - Product family standard | ○ |
| CISPR 14-2 Ed.1.2：2008 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2： Immunity - Product family standard |
|
| CISPR 14-2 Ed.2.0：2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2： Immunity - Product family standard | ○ |
| CISPR 14-2 Ed.3.0：2020 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2： Immunity - Product family standard | ○ |
| CISPR 15 Ed.7.0：2005 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| CISPR 15 Amd.1 Ed.7.0：2006 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| CISPR 15 Amd.2 Ed.7.0：2008 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| CISPR 15 Ed.7.2：2009 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
|
| CISPR 15 Ed.8.0：2013 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| CISPR 15 Amd.1 Ed.8.0：2015 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
|
| CISPR 15 Ed.9.0：2018 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| CISPR 16-1-2 Ed.1.0：2003 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | ○ |
| CISPR 16-1-2 Ed.1.2：2006 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances |
|
| CISPR 16-1-2 Amd.1 Ed.1.0：2004 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | ○ |
| CISPR 16-1-2 Amd.2 Ed.1.0：2006 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances | ○ |
| CISPR 16-1-2 Ed.2.0：2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements | ○ |
| CISPR 16-1-2 Amd.1 Ed.2.0：2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2： Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements | ○ |
| CISPR 16-1-3 Ed.2.0：2004 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | ○ |
| CISPR 16-1-3 Amd.1 Ed.2.0：2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | ○ |
| CISPR 16-1-3 Amd.2 Ed.2.0：2020 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3： Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power | ○ |
| CISPR 16-2-1 Ed.2.0：2008 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements | ○ |
| CISPR 16-2-1 Ed.2.1：2010 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
|
| CISPR 16-2-1 Ed.3.0：2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements | ○ |
| CISPR 16-2-1 Amd.1 Ed.2.0：2010 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements | ○ |
| CISPR 16-2-1 Amd.2 Ed.2.0：2013 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements | ○ |
| CISPR 16-2-1 Amd.1 Ed.3.0：2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1： Methods of measurement of disturbances and immunity - Conducted disturbance measurements | ○ |
| CISPR 16-2-2 Ed.2.0：2010 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2： Methods of measurement of disturbances and immunity - Measurement of disturbance power | ○ |
| CISPR 16-2-3 Ed.4.0：2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3： Methods of measurement of disturbances and immunity - Radiated disturbance measurements | ○ |
| CISPR 16-2-3 Amd.1 Ed.4.0：2019 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3： Methods of measurement of disturbances and immunity - Radiated disturbance measurements | ○ |
| CISPR 16-2-4 Ed.1.0：2003 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4： Methods of measurement of disturbances and immunity - Immunity measurements | ○ |
| CISPR 20 Ed.6.0：2006 | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | ○ |
| CISPR 20 Amd.1 Ed.6.0：2013 | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement | ○ |
| CISPR 22 Ed.6.0：2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | ○ |
| CISPR 24 Ed.2.0：2010 | Information technology equipment - Immunity characteristics - Limits and methods of measurement | ○ |
| CISPR 24 Amd.1 Ed.2.0：2015 | Information technology equipment - Immunity characteristics - Limits and methods of measurement | ○ |
| CISPR 25 Ed.3.0：2008 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | ○ |
| CISPR 25 Ed.4.0：2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | ○ |
| CISPR 25 Ed.5.0：2021 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | ○ |
| CISPR 32 Ed.2.0：2015 | Electromagnetic compatibility of multimedia equipment - Emission requirements | ○ |
| CISPR 32 Amd.1 Ed.2.0：2019 | Electromagnetic compatibility of multimedia equipment - Emission requirements | ○ |
| CISPR 35 Ed.1.0：2016 | Electromagnetic compatibility of multimedia equipment - Immunity requirements | ○ |
FCC規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| 47CFR part 1：2010 | Practice and procedure |
|
| 47CFR part 1：2012 | Practice and procedure |
|
| 47CFR part 15：2010 | Radio frequency devices |
|
| 47CFR part 15：2012 | Radio frequency devices |
|
| 47CFR part 18：2010 | Industrial,scientific,and medical equipment |
|
| 47CFR part 18：2012 | Industrial,scientific,and medical equipment |
|
EN規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| EN 71-1：2011 | Safety of toys.Mechanical and physical properties | ○ |
| EN 71-1：2014 | Safety of toys.Mechanical and physical properties |
|
| EN 71-1：2014+A1：2018 | Safety of toys.Mechanical and physical properties |
|
| EN 71-2：2011 | Safety of toys. Flammability | ○ |
| EN 71-2：2011+A1：2014 | Safety of toys. Flammability | ○ |
| EN 71-2：2020 | Safety of toys. Flammability |
|
| EN 71-3：2013 | Safety of toys. Migration of certain elements | ○ |
| EN 71-3：2013+A1 2014 | Safety of toys. Migration of certain elements | ○ |
| EN 71-3：2013+A3 2018 | Safety of toys. Migration of certain elements |
|
| EN 71-3：2019 | Safety of toys. Migration of certain elements | ○ |
| EN 71-3：2019+A1：2021 | Safety of toys. Migration of certain elements | ○ |
| EN 71-4：2020 | Safety of toys - Part 4： Experimental sets for chemistry and related activities |
|
| EN 71-7：2014+A3：2020 | Safety of toys - Part 7： Finger paints - Requirements and test methods |
|
| EN 71-12：2016 | Safety of toys - Part 12： N-Nitrosamines and N-nitrosatable substances |
|
| EN 71-13：2021 | Safety of toys - Part 13： Olfactory board games, cosmetic kits and gustative games |
|
| EN 71-13：2021+A1：2022 | Safety of toys - Part 13： Olfactory board games, cosmetic kits and gustative games |
|
| EN 287-1：2011 | Qualification test of welders - fusion Welding | ○ |
| EN 593：2009+A1：2011 | Industrial valves - Metallic butterfly valves |
|
| EN 593：2017 | Industrial valves - Metallic butterfly valves for general purposes |
|
| EN 764-5：2014 | Pressure equipment Inspection documentation of metallic materials and compliance with the material specification |
|
| EN 1171：2015 | Industrial valves - Cast iron gate valves |
|
| EN 1349：2009 | Industrial process control valves |
|
| EN 1515-4：2009 | Flanges and their joints - Bolting - Part 4： Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
| EN 1515-4：2021 | Flanges and their joints - Bolting - Part 4： Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
| EN 1983：2013 | Industrial valves - Steel ball valves |
|
| EN 1984：2010 | Industrial valves - Steel gate valves |
|
| EN ISO 9606-1：2017 | Qualification testing of welders - Fusion selding,Steels |
|
| EN 10204：2004 | Metallic products - Types of inspection documents | ○ |
| EN 12266-1：2012 | Industrial valves - Testing of metallic valves |
|
| EN 12516-1：2014 | Industrial valves - Shell design strength. Tabulation method for steel valve shells |
|
| EN 12516-1：2014+A1：2018 | Industrial valves - Shell design strength. Tabulation method for steel valve shells |
|
| EN 12516-2：2014 | Industrial valves - Shell design strength. Calculation method for steel valve shells |
|
| EN 12516-2：2014+A1：2021 | Industrial valves - Shell design strength. Calculation method for steel valve shells |
|
| EN 12516-3：2002 | Valves - Shell design strength |
|
| EN 12516-4：2014 | Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel |
|
| EN 12516-4：2014+A1：2018 | Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel |
|
| EN 15038：2006 | Translation services - Service requirements |
|
| EN ISO 15613：2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test |
|
| EN ISO 15614-1：2004+A2：2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
| EN ISO 15614-1：2017 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
| EN ISO 15614-1：2017+A1：2019 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
| EN ISO 16136：2006 | Industrial valves - Butterfly valves of thermoplastics materials |
|
| EN ISO 16136：2006+A1：2019 | Industrial valves - Butterfly valves of thermoplastics materials |
|
| EN ISO 16137：2006 | Industrial valves - Check valves of thermoplastics materials |
|
| EN ISO 16137：2006+A1：2019 | Industrial valves - Check valves of thermoplastics materials |
|
| EN ISO 16138：2006 | Industrial valves - Diaphragm valves of thermoplastics materials |
|
| EN ISO 16138：2006+A1：2019 | Industrial valves - Diaphragm valves of thermoplastics materials |
|
| EN ISO 16139：2006 | Industrial valves - Gate valves of thermoplastics materials |
|
| EN ISO 16139：2006+A1：2019 | Industrial valves - Gate valves of thermoplastics materials |
|
| EN 16767：2016 | Industrial valves - Steel and cast iron check valves |
|
| EN 16767：2020 | Industrial valves - Metallic check valves |
|
| EN ISO 17100：2015 | Translation Services - Requirements for translation services |
|
| EN ISO 17100：2015+A1：2017 | Translation Services - Requirements for translation services |
|
| EN ISO 21787：2006 | Industrial valves - Globe valves of thermoplastics materials |
|
| EN ISO 21787：2006+A1：2019 | Industrial valves - Globe valves of thermoplastics materials |
|
| EN 50561-1：2013 | Power line communication apparatus used in low- voltage installations - Radio disturbance characteristics - Limits and methods of measurement. Part.1 Apparatus for in-home use |
|
| EN 50581：2012 | Technical docuimentation for the assessment of electronic and elevtronic products with respect to the restriction of hazardous substances | ○ |
| EN 55011：2009+A1：2010 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55011：2016 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55011：2016+A1：2017 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55011：2016+A11：2020 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55011：2016+A2：2021 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55012：2007 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | ○ |
| EN 55012：2007+A1：2009 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
|
| EN 55013：2001 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement | ○ |
| EN 55013：2001+A2：2006 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement |
|
| EN 55013：2013 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement | ○ |
| EN 55013：2013+A1：2016 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement |
|
| EN 55014-1：2006+A2：2011 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus. Part.1：Emission | ○ |
| EN 55014-1：2017 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus. Part.1：Emission | ○ |
| EN 55014-1：2017+A11：2020 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus. Part.1：Emission | ○ |
| EN 55014-2：1997+A2：2008 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part.2：Immunity - Product family standard | ○ |
| EN 55014-2：2015 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part.2：Immunity - Product family standard | ○ |
| EN 55015：2006+A2：2009 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| EN 55015：2013+A1：2015 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| EN IEC 55015：2019 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
|
| EN IEC 55015：2019+A2：2020 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| EN IEC 55015：2019+A11：2020 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | ○ |
| EN 55022：2010 | Information technology equipment. Radio disturbance characteristics - Limits and methods of measurement | ○ |
| EN 55024：2010 | Information technology equipment. Immunity characteristics - Limits and methods of measurement | ○ |
| EN 55024：2010+A1：2015 | Information technology equipment. Immunity characteristics - Limits and methods of measurement | ○ |
| EN 55032：2015 | Electromagnetic compatibility of multimedia equipment - Emission requirements | ○ |
| EN 55035：2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements | ○ |
| EN 55035：2017+A11：2020 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
|
| EN 55103-2：2009 | Electromagnetic compatibility - Product family standard for audio,video,audio-visual and entertainment lighting control apparatus for professional use - Part.2：Immunity |
|
| EN 60335-1：2012 | Household and similar electrical appliances - Safety. Part.1：General requirements | ○ |
| EN 60335-1：2012+A11：2014 | Household and similar electrical appliances - Safety. Part.1：General requirements | ○ |
| EN 60335-1：2012+A13：2017 | Household and similar electrical appliances - Safety. Part.1：General requirements |
|
| EN 60335-1：2012+A2：2019 | Household and similar electrical appliances - Safety. Part.1：General requirements | ○ |
| EN 60335-1：2012+A15：2021 | Household and similar electrical appliances - Safety. Part.1：General requirements |
|
| EN 61000-3-2：2006+A2：2009 | Electromagnetic compatibility (EMC) - Part.3-2： Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) | ○ |
| EN 61000-3-2：2014 | Electromagnetic compatibility (EMC) - Part.3-2： Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) | ○ |
| EN IEC 61000-3-2：2019 | Electromagnetic compatibility (EMC) - Part.3-2： Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
|
| EN IEC 61000-3-2：2019+A1：2021 | Electromagnetic compatibility (EMC) - Part.3-2： Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
|
| EN 61000-3-3：2008 | Electromagnetic compatibility(EMC) - Part.3-3：Limits - Limits of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection | ○ |
| EN 61000-3-3：2013 | Electromagnetic compatibility(EMC) - Part.3-3：Limits - Limits of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection | ○ |
| EN 61000-3-3：2013+A1：2019 | Electromagnetic compatibility(EMC) - Part.3-3：Limits - Limits of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection | ○ |
| EN 61000-3-3：2013+A2：2021 | Electromagnetic compatibility(EMC) - Part.3-3：Limits - Limits of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection | ○ |
| EN 61000-4-4：2004+A1：2010 | Electromagnetic compatibility (EMC) - Part.4-4：Testing and measurement techniques - Electrical fast transient/burst immunity test | ○ |
| EN 61000-4-4：2012 | Electromagnetic compatibility (EMC) - Part.4-4：Testing and measurement techniques - Electrical fast transient/burst immunity test | ○ |
| EN 61000-4-5：2006 | Electromagnetic compatibility (EMC) - Part.4-5：Testing and measurement techniques - Surge immunity test | ○ |
| EN 61000-4-5：2014 | Electromagnetic compatibility (EMC) - Part.4-5：Testing and measurement techniques - Surge immunity test | ○ |
| EN 61000-4-5：2014+A1：2017 | Electromagnetic compatibility (EMC) - Part.4-5：Testing and measurement techniques - Surge immunity test | ○ |
| EN 61000-6-1：2007 | Electromagnetic compatibility (EMC) - Part.6-1：Generic standards. Immunity for residential - commercial and light- Industrial environments | ○ |
| EN IEC 61000-6-1：2019 | Electromagnetic compatibility (EMC) - Part.6-1：Generic standards. Immunity for residential - commercial and light- Industrial environments |
|
| EN 61000-6-2：2005 | Electromagnetic compatibility (EMC) - Part.6-2：Generic standards - Immunity for industrial environments | ○ |
| EN IEC 61000-6-2：2019 | Electromagnetic compatibility (EMC) - Part.6-2：Generic standards - Immunity for industrial environments |
|
| EN 61000-6-3：2007+A1：2011 | Electromagnetic compatibility (EMC) - Part.6-3：Generic standards - Emission standard for residential, commercial and light--Industrial environments | ○ |
| EN 61000-6-4：2007+A1：2011 | Electromagnetic compatibility (EMC) - Part.6-4：Generic standards - Emission standard for industrial environments | ○ |
| EN IEC 61000-6-4：2019 | Electromagnetic compatibility (EMC) - Part.6-4：Generic standards - Emission standard for industrial environments |
|
| EN 61010-1：2010/A1：2019 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1： General requirements | ○ |
| EN 61326-1：2006 | Electrical equipment for measurement, control and laboratory use - EMC requirements. Part.1：General requirements | ○ |
| EN 61326-1：2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements. Part.1：General requirements | ○ |
| EN IEC 61326-1：2021 | Electrical equipment for measurement, control and laboratory use - EMC requirements. Part.1：General requirements | ○ |
| EN 61547：2009 | Equipment for general lighting purposes - EMC immunity requirements |
|
| EN IEC 61547：2023 | Equipment for general lighting purposes - EMC immunity requirements |
|
| EN IEC 62115：2020+A11：2020 | Electric toys. Safety |
|
| EN 63000：2018 | Technical docuimentation for the assessment of electronic products with respect to the restriction of hazardous substances |
|
| EN IEC 63000：2018 | Technical docuimentation for the assessment of electronic products with respect to the restriction of hazardous substances | ○ |
| DD CLC/TS 50457-1：2008 | Conductive charging for electric vehicles. D.C. charging station |
|
| DD CLC/TS 50457-2：2008 | Conductive charging for electric vehicles. Communication protocol between off-board charger and electric vehicle |
|
| PD IEC PAS 61851-1-1：2023 | Electric vehicle conductive charging system - Specific requirements for electric vehicle conductive charging system using type 4 vehicle coupler |
|
| PD IEC PAS 62840-3：2021 | Electric vehicle battery swap system - Particular safety and interoperability requirements for battery swap systems operating with removable RESS/battery systems |
|
| PD IEC PAS 63454：2022 | Conductive charging of electric vehicles. DC vehicle coupler configuration GG |
|
| PD IEC TR 62933-200：2021 | Electrical energy storage (EES) systems - Unit parameters and testing methods. Case study of electrical energy storage (EES) systems located in EV charging station with PV |
|
| PD IEC TR 63246-4：2022 | Configurable car infotainment services (CCIS) - Protocol |
|
| PD IEC TS 62196-3-1：2020 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system |
|
| PD IEC TS 62196-4：2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications |
|
| PD IEC TS 62893-4-2：2021 | Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Cables for DC charging according to mode 4 of IEC 61851-1. Cables intended to be used with a thermal management system |
|
| PD IEC/TR 62660-4：2017 | Secondary lithium-ion cells for the propulsion of electric road vehicles. Candidate alternative test methods for the internal short circuit test of IEC 62660-3 |
|
| PD IEC/TS 62840-1：2016 | Electric vehicle battery swap system. General and guidance |
|
| PD ISO/PAS 5112：2022 | Road vehicles. Guidelines for auditing cybersecurity engineering |
|
IEC規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| IEC 60034-1 Ed.13.0：2017 | Rotating electrical machines - Part 1： Rating and performance | ○ |
| IEC 60034-1 Ed.14.0：2022 | Rotating electrical machines - Part 1： Rating and performance | ○ |
| IEC 60034-30 Ed.1.0：2008 | Rotating electrical machines - Part 30： Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) | ○ |
| IEC 60034-30-1 Ed.1.0：2014 | Rotating electrical machines - Part 30-1： Efficiency classes of line operated AC motors (IE-code) |
|
| IEC 60068-2-6 Ed.7.0：2007 | Environmental testing - Part 2-6： Tests - Test Fc： Vibration (sinusoidal) | ○ |
| IEC 60068-2-27 Ed.4.0：2008 | Environmental testing - Part 2-27： Tests - Test Ea and guidance： Shock | ○ |
| IEC 60068-2-42 Ed.3.0：2003 | Environmental testing - Part 2-42： Tests - Test Kc： Sulphur dioxide test for contacts and connections | ○ |
| IEC 60068-2-43 Ed.2.0：2003 | Environmental testing - Part 2-43： Tests - Test Kd： Hydrogen sulphide test for contacts and connections | ○ |
| IEC 60068-2-64 Ed.2.0：2008 | Environmental testing - Part 2-64： Tests - Test Fh： Vibration, broadband random and guidance | ○ |
| IEC 60068-2-64 Amd.1 Ed.2.0：2019 | Environmental testing - Part 2-64： Tests - Test Fh： Vibration, broadband random and guidance | ○ |
| IEC 60079-0 Ed.6.0：2011 | Explosive atmospheres - Part 0： Equipment - General requirements |
|
| IEC 60079-0 Ed.7.0：2017 | Explosive atmospheres - Part 0： Equipment - General requirements |
|
| IEC 60079-1 Ed.6.0：2007 | Explosive atmospheres - Part 1： Equipment protection by flameproof enclosures "d" |
|
| IEC 60079-1 Ed.7.0：2014 | Explosive atmospheres - Part 1： Equipment protection by flameproof enclosures "d" |
|
| IEC 60204-1 Ed.5.0：2005 | Safety of machinery - Electrical equipment of machines - Part 1： General requirements | ○ |
| IEC 60204-1 Amd.1 Ed.5.0：2008 | Safety of machinery - Electrical equipment of machines - Part 1： General requirements | ○ |
| IEC 60204-1 Ed.6.0：2016 | Safety of machinery - Electrical equipment of machines - Part 1： General requirements | ○ |
| IEC 60204-1 Amd.1 Ed.6.0：2021 | Safety of machinery - Electrical equipment of machines - Part 1： General requirements | ○ |
| IEC 60204-11 Ed.1.0：2000 | Safety of machinery - Electrical equipment of machines - Part 11： Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | ○ |
| IEC 60204-11 Ed.2.0：2018 | Safety of machinery - Electrical equipment of machines - Part 11： Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | ○ |
| IEC 60335-1 Ed.5.0：2010 | Household and similar electrical appliances - Safety - Part 1： General requirements | ○ |
| IEC 60335-1 Amd.1 Ed.5.0：2013 | Household and similar electrical appliances - Safety - Part 1： General requirements | ○ |
| IEC 60335-1 Amd.2 Ed.5.0：2016 | Household and similar electrical appliances - Safety - Part 1： General requirements | ○ |
| IEC 60335-1 Ed.6.0：2020 | Household and similar electrical appliances - Safety - Part 1： General requirements | ○ |
| IEC 60529 Ed.2.0：1992 | Degrees of protection provided by enclosures (IP Code) | ○ |
| IEC 60529 Amd.1 Ed.2.0：1999 | Degrees of protection provided by enclosures (IP Code) | ○ |
| IEC 60529 Amd.1 Ed.2.0：1999 | Degrees of protection provided by enclosures (IP Code) | ○ |
| IEC 60529 Amd.2 Ed.2.0：2013 | Degrees of protection provided by enclosures (IP Code) | ○ |
| IEC 60601-1 Ed.3.0：2005 | Medical electrical equipment - Part 1： General requirements for basic safety and essential performance | ○ |
| IEC 60601-1 Amd.1 Ed.3.0：2012 | Medical electrical equipment - Part 1： General requirements for basic safety and essential performance | ○ |
| IEC 60601-1 Amd.2 Ed.3.0：2020 | Medical electrical equipment - Part 1： General requirements for basic safety and essential performance | ○ |
| IEC 60601-1-2 Ed.3.0：2007 | Medical electrical equipment - Part 1-2： General requirements for basic safety and essential performance - Collateral Standard： Electromagnetic disturbances - Requirements and tests | ○ |
| IEC 60601-1-2 Ed.4.0：2014 | Medical electrical equipment - Part 1-2： General requirements for basic safety and essential performance - Collateral Standard： Electromagnetic disturbances - Requirements and tests | ○ |
| IEC 60601-1-2 Amd.1 Ed.4.0：2020 | Medical electrical equipment - Part 1-2： General requirements for basic safety and essential performance - Collateral Standard： Electromagnetic disturbances - Requirements and tests | ○ |
| IEC 60601-1-3 Ed.2.0：2008 | Medical electrical equipment - Part 1-3： General requirements for basic safety and essential performance - Collateral Standard： Radiation protection in diagnostic X-ray equipmment | ○ |
| IEC 60601-1-3 Amd.1 Ed.2.0：2013 | Medical electrical equipment - Part 1-3： General requirements for basic safety and essential performance - Collateral Standard： Radiation protection in diagnostic X-ray equipmment |
|
| IEC 60601-1-3 Amd.2 Ed.2.0：2021 | Medical electrical equipment - Part 1-3： General requirements for basic safety and essential performance - Collateral Standard： Radiation protection in diagnostic X-ray equipmment |
|
| IEC 60601-1-6 Ed.3.0：2010 | Medical electrical equipment - Part 1-6： General requirements for basic safety and essential performance - Collateral standard： Usability | ○ |
| IEC 60601-1-6 Amd.1 Ed.3.0：2013 | Medical electrical equipment - Part 1-6： General requirements for basic safety and essential performance - Collateral standard： Usability | ○ |
| IEC 60601-1-6 Amd.2 Ed.2.0：2020 | Medical electrical equipment - Part 1-6： General requirements for basic safety and essential performance - Collateral standard： Usability | ○ |
| IEC 60601-1-8 Ed.2.0：2006 | Medical electrical equipment - Part 1-8： General requirements for basic safety and essential performance - Collateral Standard： General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | ○ |
| IEC 60601-1-8 Amd.1 Ed.2.0：2012 | Medical electrical equipment - Part 1-8： General requirements for basic safety and essential performance - Collateral Standard： General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | ○ |
| IEC 60601-1-8 Amd.2 Ed.2.0：2020 | Medical electrical equipment - Part 1-8： General requirements for basic safety and essential performance - Collateral Standard： General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems | ○ |
| IEC 60601-1-9 Ed.1.0：2007 | Medical electrical equipment - Part 1-9： General requirements for basic safety and essential performance - Collateral Standard： Requirements for environmentally conscious design | ○ |
| IEC 60601-1-9 Amd.1 Ed.1.0：2013 | Medical electrical equipment - Part 1-9： General requirements for basic safety and essential performance - Collateral Standard： Requirements for environmentally conscious design |
|
| IEC 60601-1-9 Amd.2 Ed.1.0：2020 | Medical electrical equipment - Part 1-9： General requirements for basic safety and essential performance - Collateral Standard： Requirements for environmentally conscious design | ○ |
| IEC 60601-1-11 Ed.1.0：2010 | Medical electrical equipment - Part 1-11： General requirements for basic safety and essential performance - Collateral Standard： Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | ○ |
| IEC 60601-1-11 Ed.2.0：2015 | Medical electrical equipment - Part 1-11： General requirements for basic safety and essential performance - Collateral Standard： Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | ○ |
| IEC 60601-1-11 Amd.1 Ed.2.0：2020 | Medical electrical equipment - Part 1-11： General requirements for basic safety and essential performance - Collateral Standard： Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment | ○ |
| IEC 60601-2-46 Ed.2.0：2010 | Medical electrical equipment - Part 2-46： Particular requirements for basic safety and essential performance of operating tables | ○ |
| IEC 60601-2-46 Ed.3.0：2016 | Medical electrical equipment - Part 2-46： Particular requirements for basic safety and essential performance of operating tables |
|
| IEC 60601-2-46 Ed.4.0：2023 | Medical electrical equipment - Part 2-46： Particular requirements for basic safety and essential performance of operating tables |
|
| IEC 60664-1 Ed.2.0：2007 | Insulation coordination for equipment within low-voltage systems - Part 1： Principles, requirements and tests | ○ |
| IEC 60664-1 Ed.3.0：2020 | Insulation coordination for equipment within low-voltage systems - Part 1： Principles, requirements and tests | ○ |
| IEC 60664-5 Ed.2.0：2007 | Insulation coordination for equipment within low-voltage systems - Part 5： Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm |
|
| IEC 60825-1 Ed.2.0：2007 | Safety of laser products - Part 1： Equipment classification and requirements | ○ |
| IEC 60825-1 Ed.3.0：2014 | Safety of laser products - Part 1： Equipment classification and requirements | ○ |
| IEC 60950-1 Ed.2.0：2005 | Information technology equipment - Safety - Part 1： General requirements | ○ |
| IEC 60950-1 Amd.1 Ed.2.0：2009 | Information technology equipment - Safety - Part 1： General requirements | ○ |
| IEC 60950-1 Amd.2 Ed.2.0：2013 | Information technology equipment - Safety - Part 1： General requirements | ○ |
| IEC 60950-22 Ed.1.0：2005 | Information technology equipment - Safety - Part 22： Equipment to be installed outdoors | ○ |
| IEC 60950-22 Ed.2.0：2016 | Information technology equipment - Safety - Part 22： Equipment to be installed outdoors |
|
| IEC 60990 Ed.3.0：2016 | Methods of measurement of touch current and protective conductor current | ○ |
| IEC/TR 61000-1-1 Ed.1.0：1992 | Electromagnetic compatibility (EMC) - Part 1： General - Section 1： Application and interpretation of fundamental definitions and terms | ○ |
| IEC/TR 61000-1-1 Ed.2.0：2023 | Electromagnetic compatibility (EMC) - Part 1： General - Section 1： Application and interpretation of fundamental definitions and terms | ○ |
| IEC/TR 61000-1-3 Ed.1.0：2002 | Electromagnetic compatibility (EMC) - Part 1-3： General - The effects of high-altitude EMP (HEMP) on civil equipment and systems | ○ |
| IEC/TR 61000-2-1 Ed.1.0：1990 | Electromagnetic compatibility (EMC) - Part 2： Environment - Section 1： Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems | ○ |
| IEC 61000-2-2 Ed.2.0：2002 | Electromagnetic compatibility (EMC) - Part 2-2： Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | ○ |
| IEC 61000-2-2 Amd.1 Ed.2.0：2017 | Electromagnetic compatibility (EMC) - Part 2-2： Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | ○ |
| IEC 61000-2-2 Amd.2 Ed.2.0：2018 | Electromagnetic compatibility (EMC) - Part 2-2： Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | ○ |
| IEC/TR 61000-2-3 Ed.1.0：1992 | Electromagnetic compatibility (EMC) - Part 2： Environment - Section 3： Description of the environment - Radiated and non-network-frequency-related conducted phenomena | ○ |
| IEC 61000-2-4 Ed.2.0：2002 | Electromagnetic compatibility (EMC) - Part 2-4： Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances | ○ |
| IEC/TR 61000-2-6 Ed.1.0：1995 | Electromagnetic compatibility (EMC) - Part 2： Environment - Section 6： Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances | ○ |
| IEC/TR 61000-2-7 Ed.1.0：1998 | Electromagnetic compatibility (EMC) - Part 2： Environment - Section 7： Low frequency magnetic fields in various environments | ○ |
| IEC/TR 61000-2-8 Ed.1.0：2002 | Electromagnetic compatibility (EMC) - Part 2-8： Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results | ○ |
| IEC 61000-2-9 Ed.1.0：1996 | Electromagnetic compatibility (EMC) - Part 2： Environment - Section 9： Description of HEMP environment - Radiated disturbance. Basic EMC publication | ○ |
| IEC 61000-2-10 Ed.1.0：1998 | Electromagnetic compatibility (EMC) - Part 2-10： Environment - Description of HEMP environment - Conducted disturbance | ○ |
| IEC 61000-2-10 Ed.2.0：2021 | Electromagnetic compatibility (EMC) - Part 2-10： Environment - Description of HEMP environment - Conducted disturbance | ○ |
| IEC 61000-2-11 Ed.1.0：1999 | Electromagnetic compatibility (EMC) - Part 2-11： Environment - Classification of HEMP environments | ○ |
| IEC 61000-2-13 Ed.1.0：2005 | Electromagnetic compatibility (EMC) - Part 2-13： Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted | ○ |
| IEC 61000-3-2 Ed.3.0：2005 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-2 Amd.1 Ed.3.0：2008 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-2 Amd.2 Ed.3.0：2009 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-2 Ed.3.2：2009 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) |
|
| IEC 61000-3-2 Ed.4.0：2014(b) | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-2 Ed.5.0：2018 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-2 Amd.1 Ed.5.0：2020 | Electromagnetic compatibility (EMC) - Part 3-2： Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) | ○ |
| IEC 61000-3-3 Ed.2.0：2008 | Electromagnetic compatibility (EMC) - Part 3-3： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | ○ |
| IEC 61000-3-3 Ed.3.0：2013 | Electromagnetic compatibility (EMC) - Part 3-3： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection |
|
| IEC 61000-3-3 Ed.3.0：2013 | Electromagnetic compatibility (EMC) - Part 3-3： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | ○ |
| IEC 61000-3-3 Amd.1 Ed.3.0：2017 | Electromagnetic compatibility (EMC) - Part 3-3： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | ○ |
| IEC 61000-3-3 Amd.2 Ed.3.0：2021 | Electromagnetic compatibility (EMC) - Part 3-3： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection | ○ |
| IEC/TS 61000-3-4 Ed.1.0：1998 | Electromagnetic compatibility (EMC) - Part 3-4： Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A | ○ |
| IEC 61000-3-8 Ed.1.0：1997 | Electromagnetic compatibility (EMC) - Part 3： Limits - Section 8： Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels | ○ |
| IEC 61000-3-11 Ed.1.0：2000 | Electromagnetic compatibility (EMC) - Part 3-11： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≦ 75 A and subjet to conditional connection | ○ |
| IEC 61000-3-11 Ed.2.0：2017 | Electromagnetic compatibility (EMC) - Part 3-11： Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≦ 75 A and subjet to conditional connection | ○ |
| IEC 61000-3-12 Ed.2.0：2011 | Electromagnetic compatibility (EMC) - Part 3-12： Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase | ○ |
| IEC 61000-3-12 Amd.1.0 Ed.2.0：2021 | Electromagnetic compatibility (EMC) - Part 3-12： Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase | ○ |
| IEC 61000-4-1 Ed.3.0：2006 | Electromagnetic compatibility (EMC) - Part 4-1： Testing and measurement techniques - Overview of IEC 61000-4 series | ○ |
| IEC 61000-4-1 Ed.1.0：2016 | Electromagnetic compatibility (EMC) - Part 4-1： Testing and measurement techniques - Overview of IEC 61000-4 series | ○ |
| IEC 61000-4-2 Ed.2.0：2008 | Electromagnetic compatibility (EMC) - Part 4-2： Testing and measurement techniques - Electrostatic discharge immunity test | ○ |
| IEC 61000-4-3 Ed.3.0：2006 | Electromagnetic compatibility (EMC) - Part 4-3： Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | ○ |
| IEC 61000-4-3 Amd.1 Ed.3.0：2007 | Electromagnetic compatibility (EMC) - Part 4-3： Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | ○ |
| IEC 61000-4-3 Amd.2 Ed.3.0：2010 | Electromagnetic compatibility (EMC) - Part 4-3： Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | ○ |
| IEC 61000-4-3 Ed.4.0：2020 | Electromagnetic compatibility (EMC) - Part 4-3： Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | ○ |
| IEC 61000-4-4 Ed.3.0：2012 | Electromagnetic compatibility (EMC) - Part 4-4： Testing and measurement techniques - Electrical fast transient/burst immunity test | ○ |
| IEC 61000-4-5 Ed.2.0：2005 | Electromagnetic compatibility (EMC) - Part 4-5： Testing and measurement techniques - Surge immunity test | ○ |
| IEC 61000-4-5 Ed.3.0：2014(b) | Electromagnetic compatibility (EMC) - Part 4-5： Testing and measurement techniques - Surge immunity test | ○ |
| IEC 61000-4-5 Amd.1 Ed.3.0：2017 | Electromagnetic compatibility (EMC) - Part 4-5： Testing and measurement techniques - Surge immunity test | ○ |
| IEC 61000-4-6 Ed.3.0：2008 | Electromagnetic compatibility (EMC) - Part 4-6： Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ○ |
| IEC 61000-4-6 Ed.4.0：2013(b) | Electromagnetic compatibility (EMC) - Part 4-6： Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | ○ |
| IEC 61000-4-6 Ed.5.0：2023 | Electromagnetic compatibility (EMC) - Part 4-6： Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
|
| IEC 61000-4-7 Ed.2.0：2002 | Electromagnetic compatibility (EMC) - Part 4-7： Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | ○ |
| IEC 61000-4-7 Amd.1 Ed.2.0：2008 | Electromagnetic compatibility (EMC) - Part 4-7： Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto | ○ |
| IEC 61000-4-8 Ed.2.0：2009 | Electromagnetic compatibility (EMC) - Part 4-8： Testing and measurement techniques - Power frequency magnetic field immunity test | ○ |
| IEC 61000-4-9 Ed.1.0：1993 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Ssction 9：Pulse magnetic field immunity test | ○ |
| IEC 61000-4-9 Amd.1 Ed.1.0：2000 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Ssction 9：Pulse magnetic field immunity test | ○ |
| IEC 61000-4-9 Ed.1.1：2001 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Ssction 9：Pulse magnetic field immunity test |
|
| IEC 61000-4-9 Ed.2.0：2016 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Ssction 9：Pulse magnetic field immunity test | ○ |
| IEC 61000-4-10 Ed.1.0：1993 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Section 10： Damped oscillatory magnetic field immunity test |
|
| IEC 61000-4-10 Amd.1 Ed.1.0：2000 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Section 10： Damped oscillatory magnetic field immunity test | ○ |
| IEC 61000-4-10 Ed.2.0：2016 | Electromagnetic compatibility (EMC) - Part 4： Testing and measurement techniques - Section 10： Damped oscillatory magnetic field immunity test | ○ |
| IEC 61000-4-11 Ed.2.0：2004 | Electromagnetic compatibility (EMC) - Part 4-11： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | ○ |
| IEC 61000-4-11 Amd.1 Ed.2.0：2017 | Electromagnetic compatibility (EMC) - Part 4-11： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | ○ |
| IEC 61000-4-11 Ed.3.0：2020 | Electromagnetic compatibility (EMC) - Part 4-11： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | ○ |
| IEC 61000-4-13 Ed.1.0：2002 | Electromagnetic compatibility (EMC) - Part 4-13： Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test | ○ |
| IEC 61000-4-13 Amd.1 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-13： Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test | ○ |
| IEC 61000-4-13 Ed.1.0：2015 | Electromagnetic compatibility (EMC) - Part 4-13： Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test | ○ |
| IEC 61000-4-14 Ed.1.2：1999 | Electromagnetic compatibility (EMC) - Part 4-14： Testing and measurement techniques - Voltage fluctuation immunity test | ○ |
| IEC 61000-4-14 Amd.1 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 4-14： Testing and measurement techniques - Voltage fluctuation immunity test | ○ |
| IEC 61000-4-14 Amd.2 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-14： Testing and measurement techniques - Voltage fluctuation immunity test | ○ |
| IEC 61000-4-15 Ed.2.0：2010 | Electromagnetic compatibility (EMC) - Part 4-15： Testing and measurement techniques - Flickermeter - Functional and design specifications | ○ |
| IEC 61000-4-16 Ed.1.0：1998 | Electromagnetic compatibility (EMC) - Part 4-16： Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | ○ |
| IEC 61000-4-16 Amd.1 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 4-16： Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | ○ |
| IEC 61000-4-16 Amd.2 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-16： Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | ○ |
| IEC 61000-4-16 Ed.2.0：2015 | Electromagnetic compatibility (EMC) - Part 4-16： Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | ○ |
| IEC 61000-4-17 Ed.1.0：1999 | Electromagnetic compatibility (EMC) - Part 4-17： Testing and measurement techniques - Ripple on d.c. input power port immunity test | ○ |
| IEC 61000-4-17 Amd.1 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 4-17： Testing and measurement techniques - Ripple on d.c. input power port immunity test | ○ |
| IEC 61000-4-17 Amd.2 Ed.1.0：2008 | Electromagnetic compatibility (EMC) - Part 4-17： Testing and measurement techniques - Ripple on d.c. input power port immunity test | ○ |
| IEC 61000-4-20 Ed.2.0：2010 | Electromagnetic compatiility (EMC) - Part 4-20： Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
|
| IEC 61000-4-20 Ed.3.0：2022 | Electromagnetic compatiility (EMC) - Part 4-20： Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | ○ |
| IEC 61000-4-23 Ed.1.0：2000 | Electromagnetic compatibility (EMC) - Part 4-23： Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | ○ |
| IEC 61000-4-23 Ed.2.0：2016 | Electromagnetic compatibility (EMC) - Part 4-23： Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances |
|
| IEC 61000-4-24 Ed.1.0：1997 | Electromagnetic compatibility (EMC) - Part 4-24： Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | ○ |
| IEC 61000-4-24 Ed.2.0：2015 | Electromagnetic compatibility (EMC) - Part 4-24： Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance |
|
| IEC 61000-4-24 Amd.1 Ed.2.0：2023 | Electromagnetic compatibility (EMC) - Part 4-24： Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance |
|
| IEC 61000-4-27 Ed 1.0：2000 | Electromagnetic compatibility (EMC) - Part 4-27： Testing and measurement techniques - Unbalance, immunity test | ○ |
| IEC 61000-4-27 Amd.1 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-27： Testing and measurement techniques - Unbalance, immunity test | ○ |
| IEC 61000-4-28 Ed.1.0：1999 | Electromagnetic compatibility (EMC) - Part 4-28： Testing and measurement techniques - Variation of power frequency, immunity test | ○ |
| IEC 61000-4-28 Amd.1 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 4-28： Testing and measurement techniques - Variation of power frequency, immunity test | ○ |
| IEC 61000-4-28 Amd.2 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-28： Testing and measurement techniques - Variation of power frequency, immunity test | ○ |
| IEC 61000-4-29 Ed.1.0：2000 | Electromagnetic compatibility (EMC) - Part 4-29： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | ○ |
| IEC/TR 61000-4-32 Ed.1.0：2002 | Electromagnetic compatibility (EMC) - Part 4-32： Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium | ○ |
| IEC 61000-4-33 Ed.1.0：2005 | Electromagnetic compatibility (EMC) - Part 4-33： Testing and measurement techniques - Measurement methods for high-power transient parameters | ○ |
| IEC 61000-4-34 Ed.1.0：2005 | Electromagnetic compatibility (EMC) - Part 4-34： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmen twith input current more than 16 A per phase | ○ |
| IEC 61000-4-34 Amd.1 Ed.1.0：2009 | Electromagnetic compatibility (EMC) - Part 4-34： Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmen twith input current more than 16 A per phase | ○ |
| IEC 61000-5-1 Ed.1.0：1996 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 1： General considerations | ○ |
| IEC/TR 61000-5-1 Ed. 2.0：2023 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 1： General considerations | ○ |
| IEC/TR 61000-5-2 Ed.1.0：1997 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 2： Earthing and cabling | ○ |
| IEC/TR 61000-5-3 Ed.1.0：1999 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 3： HEMP protection concepts | ○ |
| IEC/TS 61000-5-4 Ed.1.0：1996 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 4： Immunity to HEMP - Specifications for protective devices against HEMP radiated disturbance | ○ |
| IEC 61000-5-5 Ed.1.0：1996 | Electromagnetic compatibility (EMC) - Part 5： Installation and mitigation guidelines - Section 5： Specification of protective devices for HEMP conducted disturbance | ○ |
| IEC/TR 61000-5-6 Ed.1.0：2002 | Electromagnetic compatibility (EMC) - Part 5-6： Installation and mitigation guidelines - Mitigation of external EM influences | ○ |
| IEC 61000-5-7 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 5-7： Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) | ○ |
| IEC 61000-6-1 Ed.2.0：2005 | Electromagnetic compatibility (EMC) - Part 6-1： Generic standards - Immunity standard for residential, commercial and light-industrial environments | ○ |
| IEC 61000-6-1 Ed.3.0：2016 | Electromagnetic compatibility (EMC) - Part 6-1： Generic standards - Immunity standard for residential, commercial and light-industrial environments | ○ |
| IEC 61000-6-2 Ed.2.0：2005 | Electromagnetic compatibility (EMC) - Part 6-2： Generic standards - Immunity for industrial environments | ○ |
| IEC 61000-6-2 Ed.3.0：2016 | Electromagnetic compatibility (EMC) - Part 6-2： Generic standards - Immunity for industrial environments | ○ |
| IEC 61000-6-3 Ed.2.0：2006 | Electromagnetic compatibility (EMC) - Part 6-3： Generic standards - Emission standard for residential, commercial and light-industrial environments | ○ |
| IEC 61000-6-3 Amd.1 Ed.2.0：2010 | Electromagnetic compatibility (EMC) - Part 6-3： Generic standards - Emission standard for residential, commercial and light-industrial environments | ○ |
| IEC 61000-6-3 Ed.3.0：2020 | Electromagnetic compatibility (EMC) - Part 6-3： Generic standards - Emission standard for residential, commercial and light-industrial environments | ○ |
| IEC 61000-6-4 Ed.2.0：2006 | Electromagnetic compatibility (EMC) - Part 6-4： Generic standards - Emission standard for industrial environments | ○ |
| IEC 61000-6-4 Amd.1 Ed.2.0：2010 | Electromagnetic compatibility (EMC) - Part 6-4： Generic standards - Emission standard for industrial environments | ○ |
| IEC 61000-6-4 Ed.3.0：2018 | Electromagnetic compatibility (EMC) - Part 6-4： Generic standards - Emission standard for industrial environments | ○ |
| IEC/TS 61000-6-5 Ed.1.0：2001 | Electromagnetic compatibility (EMC) - Part 6-5： Generic standards - Immunity for power station and substation environments | ○ |
| IEC 61000-6-5 Ed.1.0：2015 | Electromagnetic compatibility (EMC) - Part 6-5： Generic standards - Immunity for power station and substation environments | ○ |
| IEC 61000-6-6 Ed.1.0：2003 | Electromagnetic compatibility (EMC) - Part 6-6： Generic standards - HEMP immunity for indoor equipment | ○ |
| IEC 61010-1 Ed.3.0：2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1： General requirements | ○ |
| IEC 61010-1 Amd.1 Ed.3.0：2016(b) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1： General requirements | ○ |
| IEC 61326-1 Ed.2.0：2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1： General requirements | ○ |
| IEC 61326-1 Ed.3.0：2020 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1： General requirements | ○ |
| IEC 61326-2-1 Ed.2.0：2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1： Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications | ○ |
| IEC 61326-2-1 Ed.3.0：2020 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1： Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
|
| IEC 61326-2-2 Ed.2.0：2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2： Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | ○ |
| IEC 61326-2-2 Ed.3.0：2020 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2： Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | ○ |
| IEC 61326-2-3 Ed.2.0：2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3： Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
|
| IEC 61326-2-3 Ed.3.0：2020 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3： Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | ○ |
| IEC 61326-2-6 Ed.2.0：2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6： Particular requirements - In vitro diagnostic (IVD) medical equipment | ○ |
| IEC 61326-2-6 Ed.3.0：2020 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6： Particular requirements - In vitro diagnostic (IVD) medical equipment | ○ |
| IEC 61373 Ed.2.0：2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
|
| IEC 61558-2-1 Ed.2.0：2007(b) | Safety of power transformers, power supplies, reactors and similar products - Part 2-1： Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | ○ |
| IEC 61558-2-1 Ed.3.0：2021 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1： Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | ○ |
| IEC 62133-2 Ed.1.0：2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications - Part 2：Lithium systems | ○ |
| IEC 62133-2 Amd.1 Ed.1.0：2021 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications - Part 2：Lithium systems | ○ |
| IEC 62304 Ed.1.0：2006 | Medical device software - Software life cycle processes | ○ |
| IEC 62304 Amd.1 Ed.1.0：2015 | Medical device software - Software life cycle processes | ○ |
| IEC 62321 Ed.1.0：2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | ○ |
| IEC 62321-1 Ed.1.0：2013 | Determination of certain substances in electrotechnical products - Part 1： Introduction and overview | ○ |
| IEC 62321-2 Ed.1.0：2013 | Determination of certain substances in electrotechnical products - Part 2： Disassembly, disjointment and mechanical sample preparation | ○ |
| IEC 62321-2 Ed.2.0：2021 | Determination of certain substances in electrotechnical products - Part 2： Disassembly, disjointment and mechanical sample preparation | ○ |
| IEC 62321-3-1 Ed.1.0：2013 | Determination of certain substances in electrotechnical products - Part 3-1： Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry | ○ |
| IEC 62321-8 Ed.1.0：2017 | Determination of certain substances in electrotechnical products - Part 8： Phthalates in polymers by gas chromatography-mass spectrometry(GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory(Py-TD-GC-MS) | ○ |
| IEC 62333-1 Ed.1.0：2006 | Noise suppression sheet for digital devices and equipment - Part 1： Definitions and general properties |
|
| IEC 62333-2 Ed 1.0：2006 | Noise suppression sheet for digital devices and equipment - Part 2： Measuring methods |
|
| IEC 62333-2 Amd.1 Ed 1.0：2015 | Noise suppression sheet for digital devices and equipment - Part 2： Measuring methods |
|
| IEC 62368-1 Ed.2.0：2014 | Audio/video, information and communication technology equipment - Part 1： Safety requirements | ○ |
| IEC 62368-1 Ed.3.0：2018 | Audio/video, information and communication technology equipment - Part 1： Safety requirements | ○ |
| IEC TR 62368-2：2019 | Audio/video, information and communication technology equipment - Part 1： Safety requirements |
|
| IEC 62471 Ed.1.0：2006 | Photobiological safety of lamps and lamp systems |
|
| IEC/TR 62471-2 Ed.1.0：2009 | Photobiological safety of lamps and lamp systems - Part 2： Guidance on manufacturing requirements relating to non-laser optical radiation safety |
|
| IEC 62474 Ed.2.1：2020 (b) | Material declaration for products of and for the electrotechnical industry |
|
| IEC/PAS 62596 Ed.1.0：2009 | Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines | ○ |
| IEC 82079-1 Ed.1.0：2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1： General principles and detailed requirements | ○ |
| IEC/IEEE 82079-1 Ed.2.0：2019 | Preparation of information for use (instructions for use) of products - Part 1： Principles and requirements | ○ |
| IEC 62660-1 Ed. 2.0：2018 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1： Performance testing |
|
| IEC 62660-2 Ed. 2.0：2018 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2： Reliability and abuse testing |
|
| IEC 62660-3 Ed. 2.0：2022 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3： Safety requirements |
|
| IEC/TR 62660-4 Ed. 1.0：2017 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 4： Candidate alternative test methods for the internal short circuit test of IEC 62660-3 |
|
| IEC 62196-1 Ed. 4.0：2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1： General requirements |
|
| IEC 62196-2 Ed. 3.0：2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2： Dimensional compatibility requirements for AC pin and contact-tube accessories |
|
| IEC 62196-3 Ed. 2.0：2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3： Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers |
|
| IEC/TS 62196-3-1 Ed. 1.0：2020 | Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1： Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system |
|
| IEC/TS 62196-4 Ed. 1.0：2022 | Plugs, socket-outlets, vehicle connectors and vehicles inlet - Conductive charging of electric vehicles - Part 4： Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for class II or class III applications |
|
| IEC 62196-6 Ed. 1.0：2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6： Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation |
|
| IEC/PAS 63454 Ed. 1.0：2022 | Conductive charging of electric vehicles - DC vehicle coupler configuration GG |
|
| IEC/PAS 63472 Ed. 1.0：2023 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler |
|
| IEC 61851-1 Ed. 3.0：2017 | Electric vehicle conductive charging system - Part 1： General requirements | ○ |
| IEC/PAS 61851-1-1 Ed. 1.0：2023 | Electric vehicle conductive charging system - Part 1-1： Specific requirements for electric vehicle conductive charging system using type 4 vehicle coupler |
|
| IEC 61851-21-1 Ed. 1.0：2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
|
| IEC 61851-21-2 Ed. 1.0：2018 | Electric vehicle conductive charging system - Part 21-2： Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems |
|
| IEC 61851-25 Ed. 1.0：2020 | Electric vehicle conductive charging system - Part 25： DC EV supply equipment where protection relies on electrical separation |
|
| IEC 61980-1 Ed. 2.0：2020 | Electric vehicle wireless power transfer (WPT) systems - Part 1： General requirements |
|
| IEC 61980-2 Ed. 1.0：2023 | Electric vehicle wireless power transfer (WPT) systems - Part 2： Specific requirements for MF-WPT system communication and activities |
|
| IEC 61980-3 Ed. 1.0：2022 | Electric vehicle wireless power transfer (WPT) systems - Part 3： Specific requirements for magnetic field wireless power transfer systems |
|
| IEC 62576 Ed. 2.0：2018 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
|
| IEC/TS 62840-1 Ed. 1.0：2016 | Electric vehicle battery swap system - Part 1： General and guidance |
|
| IEC 62840-2 Ed. 1.0：2016 | Electric vehicle battery swap system - Part 2： Safety requirements |
|
| IEC/PAS 62840-3 Ed. 1.0：2021 | Electric vehicle battery swap system - Part 3： Particular safety and interoperability requirements for battery swap systems operating with removable RESS/battery systems |
|
| IEC 63119-2 Ed. 1.0：2022 | Information exchange for electric vehicle charging roaming service - Part 2： Use cases |
|
| IEC 62893-1 Ed. 1.1：2020 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1： General requirements |
|
| IEC 62893-2 Ed. 1.0：2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2： Test methods |
|
| IEC 62893-3 Ed. 1.0：2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3： Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V |
|
| IEC 62893-4-1 Ed. 1.0：2020 | Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1： Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system |
|
| IEC/TS 62893-4-2 Ed. 1.0：2021 | Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-2： Cables for DC charging according to mode 4 of IEC 61851-1 - Cables intended to be used with a thermal management system |
|
| IEC 63119-1 Ed. 1.0：2019 | Information exchange for electric vehicle charging roaming service - Part 1： General |
|
| CISPR 36 Ed. 1.1：2023 | Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz |
|
ISO規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| ISO 10062：2006 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
|
| ISO 10605：2008 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | ○ |
| ISO 10605：2008/Amd.1：2014 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | ○ |
| ISO 10605：2023 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | ○ |
| ISO 10993-1：2018 | Biological evaluation of medical devices - Part 1：Evalution and testing within a risk management process | ○ |
| ISO 11201：2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections | ○ |
| ISO 11341：2004 | Paints and varnishes - Artifical weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation |
|
| ISO 11452-1：2005 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1： General principles and terminology | ○ |
| ISO 11452-1：2005/Amd.1：2008 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1： General principles and terminology | ○ |
| ISO 11452-1：2015 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1： General principles and terminology | ○ |
| ISO 11452-3：2001 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3： Transverse electromagnetic mode (TEM) cell | ○ |
| ISO 11452-3：2016 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3： Transverse electromagnetic mode (TEM) cell | ○ |
| ISO 11452-4：2011 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4： Harness excitation methods | ○ |
| ISO 11452-4：2020 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4： Harness excitation methods | ○ |
| ISO 11997-1：2005 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1： Wet (salt fog)/dry/humidity |
|
| ISO 11997-1：2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1： Wet (salt fog)/dry/humidity |
|
| ISO 11997-2：2000 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2： Wet (salt fog)/dry/humidity/UV light |
|
| ISO 11997-2：2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2： Wet (salt fog)/dry/humidity/UV light |
|
| ISO 12100：2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction | ○ |
| ISO 12405-4：2018 | Electrically propelled road vehicles --Test specification for lithium-ion traction battery packs and systems -- Part 4： Performance testing |
|
| ISO 12619-2：2014/Amd 1：2016 | ISO 12619-2：2014/Amd 1：2016 |
|
| ISO 12619-3：2014/Amd 1：2016 | ISO 12619-3：2014/Amd 1：2016 |
|
| ISO 13320：2009 | Particle size analysis - Laser diffraction methods |
|
| ISO 13320：2020 | Particle size analysis - Laser diffraction methods |
|
| ISO 13355：2001 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
|
| ISO 13355：2016 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
|
| ISO 13849-1：2006 | Safety of machinery - Safety-related parts of control systems - Part 1： General principles for design | ○ |
| ISO 13849-1：2015 | Safety of machinery - Safety-related parts of control systems - Part 1： General principles for design | ○ |
| ISO 13849-1：2023 | Safety of machinery - Safety-related parts of control systems - Part 1： General principles for design | ○ |
| ISO 13849-2：2012 | Safety of machinery - Safety-related parts of control systems - Part 2： Validation | ○ |
| ISO 14001：2015 | Environmental management systems - Requirements with guidance for use | ○ |
| ISO 14253-1：1998 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1： Decision rules for proving conformance or non-conformance with specifications |
|
| ISO 14253-1：2017 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1： Decision rules for proving conformance or non-conformance with specifications |
|
| ISO 14253-2：2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2： Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
|
| ISO 1463：2003 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method |
|
| ISO 1463：2021 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method |
|
| ISO 14782：1999 | Plastics - Determination of haze for transparent materials |
|
| ISO 14782：2021 | Plastics - Determination of haze for transparent materials |
|
| ISO 14971：2007 | Medical devices - Application of risk management to medical devices | ○ |
| ISO 14971：2019 | Medical devices - Application of risk management to medical devices | ○ |
| ISO 15184：2012 | Paints and varnishes - Determination of film hardness by pencil test |
|
| ISO 15184：2020 | Paints and varnishes - Determination of film hardness by pencil test |
|
| ISO 1519：2011 | Paints and varnishes - Bend test (cylindrical mandrel) |
|
| ISO 1520：2006 | Paints and varnishes - Cupping test |
|
| ISO 16128-1：2016 | Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products - Part 1： Definitions for ingredients | ○ |
| ISO 16128-2：2017 | Cosmetics - Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Part 2： Criteria for ingredients and products | ○ |
| ISO 16128-2：2017/Amd.1：2022 | Cosmetics - Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Part 2： Criteria for ingredients and products | ○ |
| ISO 16474-1：2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 1：General guidance |
|
| ISO 16474-2：2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2：Xenon-arc lamps |
|
| ISO 17100：2015 | Translation Services. Requirements for translation services | ○ |
| ISO 17100：2015/Amd.1：2017 | Translation Services. Requirements for translation services | ○ |
| ISO 17398：2004 | Safety colours and safety signs - Classification, performance and durability of safety signs |
|
| ISO 17409：2020 | Electrically propelled road vehicles -- Conductive power transfer -- Safety requirements |
|
| ISO 19363：2020 | Electrically propelled road vehicles -- Magnetic field wireless power transfer -- Safety and interoperability requirements |
|
| ISO 19453-6：2020 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 6： Traction battery packs and systems |
|
| ISO 20607：2019 | Safety of machinery - Instruction handbook - General drafting principles | ○ |
| ISO 20762：2018 | Electrically propelled road vehicles -- Determination of power for propulsion of hybrid electric vehicle |
|
| ISO 2135：2010 | Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
|
| ISO 2135：2017 | Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
|
| ISO 21498-1：2021 | Electrically propelled road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 1： Voltage sub-classes and characteristics |
|
| ISO 21498-2：2021 | Electrically propelled road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 2： Electrical tests for components |
|
| ISO 2177：2003 | Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution |
|
| ISO 21782-1：2023 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 1： General test conditions and definitions |
|
| ISO 21782-2：2019 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 2： Performance testing of the motor system |
|
| ISO 21782-3：2019 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 3： Performance testing of the motor and the inverter |
|
| ISO 21782-4：2021 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 4： Performance testing of the DC/DC converter |
|
| ISO 21782-5：2021 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 5： Operating load testing of the motor system |
|
| ISO 21782-6：2019 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 6： Operating load testing of motor and inverter |
|
| ISO 21782-7：2021 | Electrically propelled road vehicles -- Test specification for electric propulsion components -- Part 7： Operating load testing of the DC/DC converter |
|
| ISO 21920-2：2021 | Amendment 1 - Geometrical Product Specifications (GPS) - Surface texture： Profile method - Terms, definitions and surface texture parameters | ○ |
| ISO 21920-3：2021 | Geometrical Product Specifications (GPS) - Surface texture： Profile method - Rules and procedures for the assessment of surface texture | ○ |
| ISO 2233：2000 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
|
| ISO 2234：2000 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
|
| ISO 22716：2007 | Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices | ○ |
| ISO 23150：2021 | Road vehicles -- Data communication between sensors and data fusion unit for automated driving functions -- Logical interface |
|
| ISO 2409：2007 | Paints and varnishes - Cross-cut test |
|
| ISO 2409：2013 | Paints and varnishes - Cross-cut test |
|
| ISO 2409：2020 | Paints and varnishes - Cross-cut test |
|
| ISO 24444：2019 | Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) | ○ |
| ISO 24444：2019/Amd.1：2022 | Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) | ○ |
| ISO 2808：2007 | Paints and varnishes - Determination of film thickness |
|
| ISO 2808：2019 | Paints and varnishes - Determination of film thickness |
|
| ISO 2812-1：2007 | Paints and varnishes - Determination of resistance to liquids - Part 1： Immersion in liquids other than water |
|
| ISO 2812-1：2017 | Paints and varnishes - Determination of resistance to liquids - Part 1： Immersion in liquids other than water |
|
| ISO 2813：1994 | Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees |
|
| ISO 2813：2014 | Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees |
|
| ISO 2884-1：1999 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1： Cone-and-plate viscometer operated at a high rate of shear |
|
| ISO 2884-2：2003 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2： Disc or ball viscometer operated at a specified speed |
|
| ISO 3248：1998 | Paints and varnishes - Determination of the effect of heat |
|
| ISO 3248：2016 | Paints and varnishes - Determination of the effect of heat |
|
| ISO 3497：2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods |
|
| ISO 37168：2022 | Smart community infrastructures -- Guidance on smart transportation by Electric, Connected and Autonomous Vehicles (eCAVs) and its application to on-demand responsive passenger services with shared vehicles |
|
| ISO 3741：2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms |
|
| ISO 3744：2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane | ○ |
| ISO 3917：1999 | Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
|
| ISO 3917：2016 | Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
|
| ISO 4287：1997 | Geometrical Product Specifications (GPS) - Surface texture： Profile method - Terms, definitions and surface texture parameters |
|
| ISO 4287：1997/Amd.1：2009 | Geometrical Product Specifications (GPS) - Surface texture： Profile method - Terms, definitions and surface texture parameters |
|
| ISO 4288：1996 | Geometrical Product Specifications (GPS) - Surface texture： Profile method - Rules and procedures for the assessment of surface texture |
|
| ISO 4624：2002 | Paints and varnishes - Pull-off test for adhesion |
|
| ISO 4624：2016 | Paints and varnishes - Pull-off test for adhesion |
|
| ISO 4624：2023 | Paints and varnishes - Pull-off test for adhesion |
|
| ISO 4662：2009 | Rubber, vulcanized or thermoplastic - Determination of rebound resilience |
|
| ISO 4662：2017 | Rubber, vulcanized or thermoplastic - Determination of rebound resilience |
|
| ISO 4892-1：1999 | Plastics - Methods of exposure to laboratory light sources - Part 1： General guidance |
|
| ISO 4892-1：2016 | Plastics - Methods of exposure to laboratory light sources - Part 1： General guidance |
|
| ISO 4892-2：2006 | Plastics - Methods of exposure to laboratory light sources - Part 2： Xenon-arc lamps |
|
| ISO 4892-2：2006/Amd.1：2009 | Plastics - Methods of exposure to laboratory light sources - Part 2： Xenon-arc lamps |
|
| ISO 4892-2：2013 | Plastics - Methods of exposure to laboratory light sources - Part 2： Xenon-arc lamps |
|
| ISO 4892-2：2013/Amd.1：2021 | Plastics - Methods of exposure to laboratory light sources - Part 2： Xenon-arc lamps |
|
| ISO 4892-4：2004 | Plastics - Methods of exposure to laboratory light sources - Part 4： Open-flame carbon-arc lamps |
|
| ISO 4892-4：2013 | Plastics - Methods of exposure to laboratory light sources - Part 4： Open-flame carbon-arc lamps |
|
| ISO 6270-1：1998 | Paints and varnishes - Determination of resistance to humidity - Part 1： Continuous condensation |
|
| ISO 6270-1：2017 | Paints and varnishes - Determination of resistance to humidity - Part 1： Condensation(single-sided exposure) |
|
| ISO 6270-2：2005 | Paints and varnishes - Determination of resistance to humidity - Part 2： Procedure for exposing test specimens in condensation-water atmospheres |
|
| ISO 6270-2：2017 | Paints and varnishes - Determination of resistance to humidity - Part 2： Condensation(in-cabinet exposure with heated water reservoir) |
|
| ISO 6272-1：2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1： Falling-weight test, large-area indenter |
|
| ISO 6272-2：2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2： Falling-weight test, small-area indenter |
|
| ISO 6469-1：2019 | Electrically propelled road vehicles -- Safety specifications -- Part 1： Rechargeable energy storage system (RESS) | ○ |
| ISO 6469-1：2019/Amd 1：2022 | Electrically propelled road vehicles -- Safety specifications -- Part 1： Rechargeable energy storage system (RESS) -- Amendment 1： Safety management of thermal propagation | ○ |
| ISO 6469-2：2022 | Electrically propelled road vehicles -- Safety specifications -- Part 2： Vehicle operational safety |
|
| ISO 6469-3：2021 | Electrically propelled road vehicles -- Safety specifications -- Part 3： Electrical safety | ○ |
| ISO 6469-4：2015 | Electrically propelled road vehicles -- Safety specifications -- Part 4： Post crash electrical safety |
|
| ISO 6507-1：2005 | Metallic materials - Vickers hardness test - Part 1： Test method |
|
| ISO 6507-1：2018 | Metallic materials - Vickers hardness test - Part 1： Test method |
|
| ISO 6507-4：2005 | Metallic materials - Vickers hardness test - Part 4： Tables of hardness values |
|
| ISO 6507-4：2018 | Metallic materials - Vickers hardness test - Part 4： Tables of hardness values |
|
| ISO 6508-1：2005 | Metallic materials - Rockwell hardness test - Part 1： Test method (scales A, B, C, D, E, F, G, H, K, N, T) |
|
| ISO 6508-1：2016 | Metallic materials - Rockwell hardness test - Part 1： Test method (scales A, B, C, D, E, F, G, H, K, N, T) |
|
| ISO 6892-1：2009 | Metallic materials - Tensile testing - Part 1： Method of test at room temperature |
|
| ISO 6892-1：2016 | Metallic materials - Tensile testing - Part 1： Method of test at room temperature |
|
| ISO 6892-1：2019 | Metallic materials - Tensile testing - Part 1： Method of test at room temperature |
|
| ISO 6892-2：2011 | Metallic materials - Tensile testing - Part 2： Method of test at elevated temperature |
|
| ISO 6892-2：2018 | Metallic materials - Tensile testing - Part 2： Method of test at elevated temperature |
|
| ISO 7637-3：2007 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3： Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | ○ |
| ISO 7637-3：2016 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3： Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | ○ |
| ISO 7668：2010 | Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
|
| ISO 7668：2018 | Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
|
| ISO 7668：2021 | Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
|
| ISO 7724-2：1984 | Paints and varnishes - Colorimetry - Part 2：Colour measurement |
|
| ISO 7784-2：1997 | Paints and varnishes - Determination of resistance to abrasion - Part 2： Rotating abrasive rubber wheel method |
|
| ISO 7784-2：2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2： Method with abrasive rubber wheels and rotating test specimen |
|
| ISO 7784-2：2023 | Paints and varnishes - Determination of resistance to abrasion - Part 2： Method with abrasive rubber wheels and rotating test specimen |
|
| ISO 7784-3：2000 | Paints and varnishes - Determination of resistance to abrasion - Part 3： Reciprocating test panel method |
|
| ISO 7784-3：2016 | Paints and varnishes - Determination of resistance to abrasion - Part 3： Method with abrasive- paper covered wheel and linearly reciprocating test specimen |
|
| ISO 8318：2000 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
|
| ISO 8714：2002 | Electric road vehicles -- Reference energy consumption and range -- Test procedures for passenger cars and light commercial vehicles | ○ |
| ISO 8715：2001 | Electric road vehicles -- Road operating characteristics |
|
| ISO 9000：2015 | Quality management systems - Fundamentals and vocabulary | ○ |
| ISO 9227：2012 | Corrosion tests in artificial atmospheres - Salt spray tests | ○ |
| ISO 9227：2017 | Corrosion tests in artificial atmospheres - Salt spray tests | ○ |
| ISO 9227：2022 | Corrosion tests in artificial atmospheres - Salt spray tests | ○ |
| ISO/TR 8713：2019 | Electrically propelled road vehicles -- Vocabulary |
|
ISO/IEC GUIDE
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| ISO/IEC Guide51：1999 | Safety aspects - Guidelines for their inclusion in standards | ○ |
| ISO/IEC Guide51：2014 | Safety aspects - Guidelines for their inclusion in standards | ○ |
MIL規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| MIL-A-8625F：1993 | Anodic Coatings for Aluminum and Aluminum Alloys | ○ |
| MIL-A-8625F Amendment 1：2013 | Anodic Coatings for Aluminum and Aluminum Alloys |
|
| MIL-PRF-8625F Amendment 1：2003 Valid Notice1：2019 | Anodic Coatings for Aluminum and Aluminum Alloys |
|
| MIL-PRF-8625F Amendment 2：2020 | Anodic Coatings for Aluminum and Aluminum Alloys |
|
| MIL-DTL-5541F：2006 | Chemical Conversion Coatings on Aluminum and Aluminum alloys |
|
| MIL-DTL-5541F：2006 Valid Notice1：2019 | Chemical Conversion Coatings on Aluminum and Aluminum alloys |
|
| MIL-DTL-13924D Notice 1：2003 | Coating, Oxide, Black, for Ferrous Metals |
|
| MIL-DTL-13924E：2018 | Coating, Oxide, Black, for Ferrous Metals |
|
| MIL-DTL-14538D Amendment 1：2011 | Chromium Plating, Black (Electrodeposited) |
|
| MIL-DTL-14538D Notice 1：2016 | Chromium Plating, Black (Electrodeposited) |
|
| MIL-DTL-5002E：2011 | Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems |
|
| MIL-DTL-5002E：2016 | Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems |
|
| MIL-DTL-81706B Amendment 1：2006 | Chemical Conversion Meterials for Coating Aluminum and Aluminum alloys |
|
| MIL-DTL-81706B Amendment 1：2006 Valid Notice1：2019 | Chemical Conversion Meterials for Coating Aluminum and Aluminum alloys |
|
| MIL-PRF-23377K：2012 | Primer Coatings ： Epoxy, High-Solids |
|
| MIL-PRF-23377K：2012 Valid Notice1：2019 | Primer Coatings ： Epoxy, High-Solids |
|
| MIL-PRF-85582E：2012 | Primer Coatings ： Epoxy, Waterborne |
|
| MIL-PRF-85582E：2012 Valid Notice1：2019 | Primer Coatings ： Epoxy, Waterborne |
|
| MIL-STD-810G：2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
|
| MIL-STD-810G：2014 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
|
| MIL-STD-810H：2019 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
|
| MIL-STD-1916 Notice2：2014 | DOD Preferred Methods for Acceptance of Product |
|
AS規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| AS9003 Rev.A：2012 | (R)Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations |
|
CID規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| CID A-A-59105B Notice2：2014 | Nitric Acid, Technical |
|
| CID A-A-59105B Notice3：2019 | Nitric Acid, Technical |
|
| CID A-A-59123 Notice2：2011 | Sodium Dichromate Dihydrate, Technical |
|
| CID A-A-59123 Notice3：2016 | Sodium Dichromate Dihydrate, Technical |
|
FED規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| FED-STD-141D：2001 | Paint, Varnish, Lacquer and Related Materials： Methods of Inspection, Sampling and Testing |
|
| FED-STD-313E：2014 | Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities |
|
| FED-STD-313F：2018 | Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities |
|
JIS規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| JIS C 0511-1：2008 | 機能安全―プロセス産業分野の安全計装システム―第1部：フレームワーク,定義及びシステム・ハードウェア・ソフトウェアの要求事項 | ○ |
| JIS C 0511-1：2019 | 機能安全―プロセス産業分野の安全計装システム―第1部：フレームワーク,定義及びシステム・ハードウェア・ソフトウェアの要求事項 | ○ |
| JIS Z 7253：2019 | GHSに基づく化学品の危険有害性情報の伝達方法－ラベル，作業場内の表示及び安全データシート（SDS） |
|
JEITA規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| JEITA ET-7407A | CSP・BGAパッケージの実装状態での環境及び耐久性試験方法 | ○ |
| JEITA EDR-4703A | ベアダイの品質ガイドライン | ○ |
| EIAJ ED-4703 | 半導体デバイスの工程内評価及び構造解析方法 | ○ |
| EIAJ ED-4703-1 | 半導体デバイスの工程内評価及び構造解析方法（追補1） | ○ |
JASO規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| JASO | 日本の自動車規格DVD-ROM（2011）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
| JASO | 日本の自動車規格DVD-ROM（2012）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
| JASO | 日本の自動車規格DVD-ROM（2016）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
| JASO | 日本の自動車規格DVD-ROM（2017）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
| JASO | 日本の自動車規格DVD-ROM（2018）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
| JASO | 日本の自動車規格DVD-ROM（2019）[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語 | ○ |
NAS規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| NAS410 Rev.4：2014 | NAS Certification & Qualification of Nondestructive Test Personnel |
|
| NAS410 Rev.5：2020 | NAS Certification & Qualification of Nondestructive Test Personnel |
|
| NAS M1312 Rev.1：2012 | Fastener Test Methods |
|
| NAS M1312-5 Rev.1：2012 | Fastener Test Methods Method 5 Stress Durability |
|
SJAC規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| SJAC 9101E：2014 | 品質マネジメントシステム-航空、宇宙及び防衛分野の組織に対する審査要求事項 Quality Management Systems - Audit Requirements for Aviation,Space, and Defense Organizations | ○ |
| SJAC 9101F：2016 | 品質マネジメントシステム-航空、宇宙及び防衛分野の組織に対する審査要求事項 Quality Management Systems - Audit Requirements for Aviation,Space, and Defense Organizations | ○ |
| SJAC 9102B：2015 | 航空宇宙 初回製品検査要求事項 Aerospace First Article Inspection Requirement | ○ |
| SJAC 9103A：2013 | 航空宇宙 キー特性管理 Variation Management of Key Characteristics | ○ |
| SJAC 9131A：2014 | 航空宇宙-品質マネジメントシステム - 不適合データの定義及び文書 Aerospace Series - Quality Management Systems - Nonconformance Data Definition and Documentation | ○ |
| SJAC 9131B：2019 | 航空宇宙-品質マネジメントシステム - 不適合データの定義及び文書 Aerospace Series - Quality Management Systems - Nonconformance Data Definition and Documentation | ○ |
| SJAC 9162：2006 | 作業者による自主確認プログラム Aerospace Operator Self-Verification Programs | ○ |
| SJAC 9162A：2017 | 作業者による自主確認プログラム Aerospace Operator Self-Verification Programs | ○ |
SAE規格
配架規格一覧
規格番号 | タイトル | 邦訳版 |
|---|---|---|
| J1634_202104 | Battery Electric Vehicle Energy Consumption and Range Test Procedure |
|
| J1666_199908 | Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure |
|
| J1711_202302 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-in Hybrid Vehicles |
|
| J1715_202209 | Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) Terminology |
|
| J1718_199704 | Measurement of Hydrogen Gas Emission From Battery-Powered Passenger Cars and Light Trucks During Battery Charging |
|
| J1766_201401 | Recommended Practice for Electric, Fuel Cell and Hybrid Electric Vehicle Crash Integrity Testing |
|
| J1772_201710 | SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler |
|
| J1773_201406 | SAE Electric Vehicle Inductively Coupled Charging |
|
| J1797_201608 | Recommended Practice for Packaging of Electric Vehicle Battery Modules |
|
| J1798_201911 | Recommended Practice for Performance Rating of Electric Vehicle Battery Modules |
|
| J227A_197602 | Electric Vehicle Test Procedure |
|
| J2288_202011 | Life Cycle Testing of Electric Vehicle Battery Modules |
|
| J2289_202108 | Electric-Drive Battery Pack System： Functional Guidelines |
|
| J2293/1_201402 | Energy Transfer System for Electric Vehicles - Part 1： Functional Requirements and System Architectures |
|
| J2293/2_201402 | Energy Transfer System for Electric Vehicles - Part 2： Communication Requirements and Network Architecture |
|
| J2380_202112 | Vibration Testing of Electric Vehicle Batteries |
|
| J2464_202108 | Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing |
|
| J2474_202111 | Self-Propelled Sweepers and Scrubbers Battery Run-Time |
|
| J2615_201110 | Testing Performance of Fuel Cell Systems for Automotive Applications |
|
| J2616_201108 | Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System |
|
| J2617_201108 | Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications |
|
| J2711_202005 | Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles |
|
| J2758_201812 | Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle |
|
| J2836/1_201907 | Use Cases for Communication Between Plug-in Vehicles and the Utility Grid |
|
| J2836/2_201109 | Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger |
|
| J2836/4_202106 | Use Cases for Diagnostic Communication for Plug-in Electric Vehicles |
|
| J2836/5_202112 | Use Cases for Customer Communication for Plug-in Electric Vehicles |
|
| J2836/6_202104 | Use Cases for Wireless Charging Communication for Plug-in Electric Vehicles |
|
| J2841_201009 | Utility Factor Definitions for Plug-In Hybrid Electric Vehicles Using Travel Survey Data |
|
| J2847/1_201908 | Communication for Smart Charging of Plug-in Electric Vehicles Using Smart Energy Profile 2.0 |
|
| J2847/2_201504 | Communication Between Plug-In Vehicles and Off-Board DC Chargers |
|
| J2847/6_202009 | Communication for Wireless Power Transfer Between Light-Duty Plug-in Electric Vehicles and Wireless EV Charging Stations |
|
| J2894/1_201901 | Power Quality Requirements for Plug-In Electric Vehicle Chargers |
|
| J2894/2_201503 | Power Quality Test Procedures for Plug-In Electric Vehicle Chargers |
|
| J2929_201302 | Safety Standard for Electric and Hybrid Vehicle Propulsion Battery Systems Utilizing Lithium-based Rechargeable Cells |
|
| J2931/1_201412 | Digital Communications for Plug-in Electric Vehicles |
|
| J2931/4_201410 | Broadband PLC Communication for Plug-in Electric Vehicles |
|
| J2931/6_202208 | Signaling Communication for Wirelessly Charged Electric Vehicles |
|
| J2931/7_201802 | Security for Plug-In Electric Vehicle Communications |
|
| J2950_202006 | Recommended Practices for Shipping Transport and Handling of Automotive-Type Battery System - Lithium Ion |
|
| J2953/1_201310 | Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE) |
|
| J2953/2_201401 | Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE) |
|
| J2953/4_202106 | Plug-in Electrical Vehicle Charge Rate Reporting and Test Procedures |
|
| J2954/2_202212 | Wireless Power Transfer for Heavy-Duty Electric Vehicles |
|
| J2954_202208 | Wireless Power Transfer for Light-Duty Plug-in/Electric Vehicles and Alignment Methodology |
|
| J2974_201902 | Technical Information Report on Automotive Battery Recycling |
|
| J2990/2_202011 | Hybrid and Electric Vehicle Safety Systems Information Report |
|
| J2990_201907 | Hybrid and EV First and Second Responder Recommended Practice |
|
| J3040_202201 | Electric Vehicle (E-Vehicle) Crash Test Lab Safety Guidelines |
|
| J3068_202207 | Electric Vehicle Power Transfer System Using a Three-Phase Capable Coupler |
|
| J3105/1_202305 | Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices, Infrastructure-Mounted Pantograph (Cross-Rail) Connection |
|
| J3105/2_202305 | Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices, Vehicle-Mounted Pantograph (Bus-Up) |
|
| J3105/3_202001 | Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Enclosed Pin and Socket Connection |
|
| J3105_202305 | Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices |
|
| J423 Reaf.FEB1998 | Methods of Measuring Case Depth |
|
| J551/5_201205 | Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, 150 kHz to 30 MHz |
|
