本文
Bulletin of Study No.9（2014） Contents
Contents
| No | Papers |
|---|---|
1 | Research and development of expert search system using hierarchical automatic tagging Norihiro Ohira, Shinichi Tomiyama |
2 | Development of non-contact respiration and heartbeat monitoring system Kohei Fujiwara, Takeshi Kobayashi, Takemi Matsui, Masayuki Kagawa |
3 | Lightning impulse withstand current capability evaluation method for SPD disconnector Taiju Kurosawa |
4 | Kenta Nakamura, Kenji Tamaoki, Kosuke Kuramochi |
5 | Development of the ozone measuring instrument using the deep ultraviolet light-emitting diode Hirotaka Nakamura, Yuji Takeda, Hiroyasu Sugano, Yumi Ahiko, Yoshinobu Aoyagi |
6 | Development of functional materials for pressure measurements Toru Yoshino, Kazuhiro Ookubo, Toshiyuki Yamanaka, Sadayuki Watanabe |
7 | Shunji Yunoki, Masushi Kohta, Yoshimi Ohyabu, Masayuki Sekiguchi, Takabumi Kubo, Tetsuji Iwasaki |
8 | Shunji Yunoki, Hirosuke Hatayama, Yoshimi Ohyabu |
9 | Preparation of the electromagnetic wave suppressing sheet using a conductive material Takeshi Ueno, Hidekatsu Sasaki, Manabu Oomori |
10 | Development of industrial computer that countermeasure against noise Hiroyasu Sano, Ken Sato, Fumio Takahashi, Toshinori Yamashita, Akihiro Tokikawa |
11 | Influence of the structure of polyhedron sandwich-core panel on mechanical properties Shunya Takahashi, Yasuhiro Nishikawa, Yujiro Abo |
12 | Manufacture of nonwoven fabrics from protection suits Risa Nagao, Ichiro Enomoto, Kengo Kubotera |
13 | Proposition of a speedier evaluation method for humidity conditioned architectural materials Saori Ikeda, Kazuhiko Hirai, Hidemi Koyama |
14 | Shigenobu Shimada, Toshiki Masuda, Yusuke Morita, Yusuke Kobayashi, Ryuta Atohama, Akinori Sasaki, Takeshi Yokosawa, Hiroaki Arai, Yasuharu Irizuki |
| No | Notes |
|---|---|
1 | Development of low-cost fabrication technology of optical waveguides on a circuit board Takashi Yamaguchi, Mamoru Ohara, Yuji Takeda |
2 | Development of high-performance photo-ionization detector (VOC sensor) Yasuyuki Hirano, Tsutomu Shinoda, Toru Ishiji, Tetsuya Iijima, Tatsuhiro Nishide |
3 | The effect of heat treatment on the hydrogen content of DLC films Aya Shimizu, Masahiro Kawaguchi |
4 | Evaluation of melt quality of AD12 aluminum alloy by vacuum gas test Kenji Sato, Koji Iwashimizu |
5 | Study of mid-far infrared irradiance spatial distribution measurement using thermopile sensor Kazutaka Isoda, Takayuki Shibuya, Toshiharu Nakajima |
6 | Development of a method for evaluation of abnormal noise from the product due to the vibration Toru Miyairi, Koichi Kanda, Asobu Hattori, Ryoji Fukuda |
7 | Measurement of sound transmission loss on small size specimen by sound intensity method Keiko Nishizawa, Koichi Kanda, Shigeyuki Watanabe, Asobu Hattori, Toru Miyairi |
8 | Large area photoresistor with the use of a silver sulfide thin film Mizue Ebisawa, Kazutaka Isoda, Hiroyuki Yokota, Takayuki Shibuya |
9 | Reduction of error of the surface thermometry using the thermocouple Toshiharu Nakajima, Haruhiko Numajiri, Masashi Sasaki |
10 | Carbon micro mold surface modified by the fluorine ion implantation Yoshikazu Teranishi, Masanori Ishizuka, Hiroshi Nagasaka, Yuriko Kondo, Tomotaro Watanabe, Kazuo Morikawa, Isao Nakamura, Tetsuhide Shimizu, Atsushi Mitsuo, Tomohiro Kobayashi |
11 | Effect of paint on weatherability of heat-treated wood Madoka Murai, Akiyoshi Onozawa, Yoshimi Kamiya, Toshio Kinoshita |
12 | Development of high efficiency fluorescent carbogenic dots Kosei Hayashi, Hiroto Watanabe, Yuya Oaki, Hiroaki Imai |
13 | Synthesis of sub-nano tungsten oxide quantum dots by using supermicroporous silica Hiroto Watanabe, Yuya Oaki, Hiroaki Imai |
14 | Development of formaldehyde sensor based on an enzyme cycling assay Tomoko Gessei, Toshiaki Wada, Nobuyuki Sanari, Akira Monkawa |
15 | Study of uncertainty estimation method of laser interferometer Yuuki Tokuta, Shouichi Nakanishi |
16 | Solidification of aluminum alloy chips by severe plastic deformation Satoshi Kobune, Koichi Kanda, Shigeyuki Watanabe |
17 | Tightening conditions in consideration of the damage prevention on bolted timber joints Doppo Matsubara, Takahiro Nakano, Masahiro Shimada |
18 | Development of slacks for supporting QOL improvement of diaper users Akihiro Hirayama, Takashi Kato, Yukiko Tsukuda, Akiko Suzuki |
19 | Application of knitted metallic fabric to agricultural covering material Yusuke Karaki, Kenji Iwasaki, Takashi Noguchi, Fujio Kaiho, Katsuhito Numajiri |
20 | Influence of the surface conditions of a specimen on the rapid identification of aluminum alloy scraps Yasuyuki Yukawa, Kentaro Yamada, Michihisa Uemoto |
21 | Study on abrasive tool for polishing of glass Yuya Suzuki, Syouichi Nakanishi |
22 | Development of silk fabric product using new pleat processing Koji Takeda, Kengo Kobayashi, Mamoru Asakura, Mirai Yamaura, Akiko Watanabe |
23 | Improvement in thermal conductivity of resin by adding aluminum fiber Taiki Tobusawa, Toshiyuki Yamanaka, Kenichi Shimizu, Masashi Kagawa, Naganori Ochiai, Yoshinori Nakao |
24 | Characteristics of tactile force in hand evaluation of fabrics Takumi Yamada, Takako Koshiba |
25 | Effect of liquid-phase oxidation treatment assisted by microwave on carbon black Kazuhiko Hirai, Saori Ikeda, Eiichi Mine |
