色の変更
文字の大きさ
小
中
大

ここから本文です。

広域首都圏輸出製品技術支援センター > 海外規格情報の閲覧サービス

最終更新日:2016年4月19日

海外規格閲覧サービス

  MTEP(都産技研本部)に設置している専用端末でISO、IEC、JIS の全規格の最新版および旧版(約3万点)を閲覧検索することができます。
  お客さまからのニーズの高い規格書は印刷版もご用意しており、原本および翻訳版をご覧いただくことができます。 無料  予約制

Web閲覧できる海外規格

東京都立産業技術センター本部内の輸出製品技術支援センターに設置の専用端末にてご利用いただけます。 ※複写、印刷はできません。

  • ISO
  • IEC
  • JIS

冊子にて閲覧できる海外規格

次の海外規格を配架しています。複写、印刷はできません。

 AMS規格

規格番号 タイトル 翻訳
AMS 03-2 :2015 Cleaning and Preparation of Metal Surfaces  
AMS 2269 Revision:F Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys  
AMS 2403 Rev.N :2015 Plating, Nickel,  General Purpose  
AMS 2406 Rev.N :2015 Plating, Chromium,  Hard Deposit  
AMS 2418 Rev.H :2011 Plating, Copper  
AMS 2430 Rev.T :2015 Shot Peening, Automatic  
AMS 2438 Rev.E :2015 (R) Plating, Chromium Thin,  Hard, Dense Deposit  
AMS 2460 Rev.A :2013 Plating, Chromium  
AMS 2469 Rev.J :2014 Hard Anodic Coating on Aluminum and Aluminum Alloys  
AMS 2471 Rev.H :2014 Anodic Treatment of Aluminum Alloys,  Sulfuric Acid Process, Undyed Coating  
AMS 2472 Rev.G :2014 Anodic Treatment of Aluminum Alloys,  Sulfuric Acid Process, Dyed Coating  
AMS 2473 Rev.H :2013 Chemical Film Treatment for Aluminum Alloys,  General Purpose Coating  
AMS 2474 Rev.D :2013 Chemical Treatment for Aluminum Alloys,  Low Electrical Resistance Coating  
AMS 2477 Rev.A :2010 Conversion Coating for Aluminum Alloys,  Low Electrical CoatingResistance  
AMS 2486 Rev.E :2010 Conversion Coating of Titanium Alloys,  Fluoride-Phosphate Type  
AMS 2488 Rev.D :2011 Anodic Treatment - Titanium and Titanium Alloys,  Solution pH 13 or Higher  
AMS 2658 Rev.C :2009 Hardness and Conductivity Inspection of Wrought Aluminium Alloy Parts  
AMS 2700 Rev.E :2011 Passivation of Corrosion Resistant Steels  
AMS 2731 Rev.J :2015 Quality Assurance Sampling and Testing,  Corrosion and Heat-Resistant Steel and Alloys Wrought Products and Foring Stock  
AMS 2750 :2012 (R) Pyrometry  
AMS 2757B :2010 Gaseous Nitrocarburizing  
AMS 2759 Rev.E :2014 Heat Treatment of Steel Parts,  General Requirements  
AMS 2759/1 Rev.E :2014 Heat Treatement of Carbon and Low-Alloy Steel Parts,  Minimum Tensile Strenght Below 220 ksi(1517 MPa)  
AMS 2759/10 Rev.A :2014 Automated Gaseous Nitriding Controlled by Nitriding Potential  
AMS 2759/11 :2014 Stress Relief of Steel Parts  
AMS 2759/12A :2007 Gaseous Nitrocarburizing, Automatically Controlled by Potentials  
AMS 2759/2 Rev.F :2014 Heat Treatment of Low-Alloy Steel Parts,  Minimum Tensile Strength 220 ksi(1517 MPa) and Higher  
AMS 2759/3 Rev.F :2015 Heat Treatment Precipitation-Hardening,  Corrosion-Resistant and Maraging Steel Parts  
AMS 2759/4 Rev.C :2014 Heat Treatment,  Austenitic Corrosion-Resistant Steel Parts  
AMS 2759/5 Rev.D :2014 Heat Treatment,  Martensitic Corrosion-Resistant Steel Parts  
AMS 2759/6 Rev.B :2014 Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts  
AMS 2759/7 Rev.B :2014 Carburizing and Heat Treatment of Carburizing Grade Steel Parts  
AMS 2759/9D :2009 Hydrogen Embrittlement Relife(Baking)of Steel Parts  
AMS 2769 Rev.B :2014 Heat Treatment of Parts in a Vacuum  
AMS 2770 Rev.N :2015 Heat Treatment of Wrought Aluminium Alloy Parts  
AMS 2771 Rev.E :2013 Heat Treatment of Aluminium Alloy Castings  
AMS 2772 Rev.F :2011 Heat Treatment of Aluminium Alloy Raw Materials  
AMS 2773 Rev.E :2013 Heat Treatment, Cast Nickel Alloy and Cobalt Alloy Parts  
AMS 2774 Rev.E :2016 Heat Treatment,  Wrought Nickel Alloy and Cobalt Alloy Parts  
AMS 4027 Rev.N :2014 Aluminium Alloy, Sheet and Plate, 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061;-T6Sheet,-T651Plate),
Solution and Precipitation Heat Treated
 
AMS 4037 Rev.Q :2014 Aluminum Alloy Sheet and Plate, 4.4 Cu-1.5 Mg-0.60 Mn(2024;-T3 Flat Sheet, T351 Plate), Solution Heat Treated  
AMS 4166 Rev.G :2012 Aluminium Alloy, Extrusions,  5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T73), Solution Heat Treated and Overaged  
AMS 5528 Rev.H :2012 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr-7.1Ni-1.1Al, Solution Heat Treated, Precipitation Hardenable  
AMS 5529 Rev.J :2012 Steel,Corrosion Resistant, Sheet and Strip, 17Cr-7.1Ni-1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch(0.038 to 1.27mm)Nominal Thickness   
AMS 5662M :2009  Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775℉(968℃) Solution Heat Treated, Precipitation-Hardenable   
AMS 5663M :2009 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode or Vacuum Induction Melted, 1775℉(968℃) Solution and Precipitation Heat Treated  
AMS 6415 Rev.T :2012 Steel, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)  
AMS 6491 Rev.E :2014 Steel Bars, Forgings, and Tubing,  4.1Cr-4.2Mo-1.0V(0.80-0.85C)(M-50), Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted  
AWS D17.1/D17.1M:2010-AMD1 Specification for Fusion Welding for Aerospase Applications  
AMS-H-6875 Rev.B :2010 Heat Treatment of Steel Raw Materials  
AMS-H-7199 Rev.A :2013

Heat Treatment of Wrought Copper-Beryllium Alloy, Process for

(Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)

 
AMS-P-21600 Paint System, Fluorescent, Removable, for Aircraft Application  
AMS-P-21600 (R) Paint System, Fluorescent, Removable, for Aircraft Application (2013-04)  
AMS-QQ-A-250 Rev.A :2012 Aluminum and Aluminum Alloy, Plate and Sheet, General Specification for  
AMS-QQ-A-250/4 Rev.B :2015 Aluminum Alloy 2024, Plate and Sheet  
AMS-QQ-C-320B :2008 Chromium Plating (Electrodeposited)  
AMS-QQ-N-290 Rev.C :2015 Nickel Plating (Electrodeposited)  
AMS-QQ-P-35A Passivation Treatments for Corrosion-Resistant Steel (Cancelled Feb 2005)  
AMS-S-6090B Steel Carburizing and Nitriding, Processes for (Cancelled May 2006)  
AMS-STD-753 Rev.A :2012 Corrosion-Resistant Steel Parts: Aampling, Inspection and Testing for Surface Passivation  

ページの先頭へ

 ANSI規格

規格番号 タイトル 翻訳
ANSI/ASQ Z1.4-2003 :R2013 Sampling Procedures and Tables for Inspection by Attributes  
ANSI C63.4 Edition: 09 METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW--VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHZ TO 40 GHZ  
ANSI C63.5 Edition: 06 ELECTROMAGNETIC COMPATIBILITY--RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL--CALIBRATION OF ANTENNAS(9 KHZ TO 40 GHZ)  

ページの先頭へ

 ASTM規格

規格番号 タイトル 翻訳
ASTM B117 - 11 Standard Practice for Operating Salt Spray (Fog) Apparatus  
ASTM B487 - 85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section  
ASTM B499 - 09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals  
ASTM B504 - 90(2011) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method  
ASTM B556 - 90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test  
ASTM B567 - 98(2009a) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method  
ASTM B568 - 98(2009) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry  
ASTM B571 - 97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings  
ASTM B578 - 87(2009) Standard Test Method for Microhardness of Electroplated Coatings  
ASTM B748 - 90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope  
ASTM D822 - 01(2006) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings  
ASTM D1499 - 05 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics  
ASTM D2244 - 11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates  
ASTM D3339 - 12 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration  
ASTM D3361 - 01(2006) Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings  
ASTM E3 - 11 Standard Guide for Preparation of Metallographic Specimens  
ASTM E8 / E8M - 11 Standard Test Methods for Tension Testing of Metallic Materials  
ASTM E10 - 12 Standard Test Method for Brinell Hardness of Metallic Materials  
ASTM E18 - 11 Standard Test Methods for Rockwell Hardness of Metallic Materials  
ASTM E18 - 12 Standard Test Methods for Rockwell Hardness of Metallic Materials  邦訳版
ASTM E21 - 09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials  
ASTM E23 - 07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials  邦訳版
ASTM E23 - 12C Standard Test Methods for Notched Bar Impact Testing of Metallic Materials 1  
ASTM E112 - 10 Standard Test Methods for Determining Average Grain Size  
ASTM E112 - 12 Standard Test Methods for Determining Average Grain Size 1  
ASTM E139 - 11 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials  
ASTM E384 - 11e1 Standard Test Method for Knoop and Vickers Hardness of Materials  
ASTM E498 / E498M - 11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode  
ASTM E930 - 99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)  
ASTM E1181 - 02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes     
ASTM F22 - 02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test  
ASTM F519 - 12 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments  
ASTM G151 - 10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources  
ASTM G152 - 05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials  
ASTM G152 - 06 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials  
ASTM G153 - 04(2010) Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials    
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.01 Steel-Piping,Tubing,Fittings  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.02 Ferrous Castings;Ferroalloys  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.03 Steel-Plate,Sheet,Strip,Wire;Stainless Steel Bar  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.04 Steel-Structural,Reinforcing,Pressure Vessel,Railway  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.05 Steel-Bars,Forgings,Bearing,Chain,Tool  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.06 Coated Steel Products  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.07 Ships and Marine Technology  
ASTM ANNUALBOOK 2015 Section1 Iron and Steel Products Volume01.08 Fasteners;Rolling Element Bearings  
ASTM ANNUALBOOK 2015 Section2 Nonferrous Metal Products Volume02.01 Copper and Copper Alloys  
ASTM ANNUALBOOK 2015 Section2 Nonferrous Metal Products Volume02.02 Aluminum and Magnesium Alloys  
ASTM ANNUALBOOK 2015 Section2 Nonferrous Metal Products Volume02.03 Electrical Conductors  
ASTM ANNUALBOOK 2015 Section2 Nonferrous Metal Products Volume02.04 Nonferrous Metals-Nickel,Cobalt,Lead,Tin,Zinc,Cadmium,Precious,  
ASTM ANNUALBOOK 2015 Section2 Nonferrous Metal Products Volume02.05 Metallic and Inorganic Coatings;Metal Powders and Metal Powder Produ  
ASTM ANNUALBOOK 2015 Section3 Metals Test Methods and Analytical Procedures Volume03.01 Metals-Mechanical Testing;Elevated and Low-Tem  
ASTM ANNUALBOOK 2015 Section3 Metals Test Methods and Analytical Procedures Volume03.02 Corrosion of Metals;Wear and Erosion  
ASTM ANNUALBOOK 2015 Section3 Metals Test Methods and Analytical Procedures Volume03.03 Nondestructive Testing   
ASTM ANNUALBOOK 2015  Section3 Metals Test Methods and Analytical Procedures Volume03.04 Magnetic Properties   
ASTM ANNUALBOOK 2015  Section3 Metals Test Methods and Analytical Procedures Volume03.05 Analytical Chemistry for Metals, Ores,   
ASTM ANNUALBOOK 2015  Section3 Metals Test Methods and Analytical Procedures Volume03.06 Molecular Spectroscopy; Surface Analysis   
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.01 Petroleum Products and Lubricants(I):C123-D3710   
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.02 Petroleum Products and Lubricants(II):D3711-   
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.03 Petroleum Products and Lubricants (III):D6138-   
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.04 Petroleum Products and Lubricants (IV): D6973-   
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.05 Combustion Characteristics; Manufactured Carbon  
ASTM ANNUALBOOK 2015  Section5 Petroleum Products,Lubricants,and Fossil Fuels Volume05.06 Gaseous Fuels; Coal and Coke   
ASTM ANNUALBOOK 2015  Section6 Paints,Related Coatings, and Aromatics Volume06.01 Paint-Tests for Chemical,Physical, and Optical   
ASTM ANNUALBOOK 2015 Section6 Paints,Related Coatings, and Aromatics Volume06.02 Paint-Products and Applications; Protective Coatings;  
ASTM ANNUALBOOK 2015 Section6 Paints,Related Coatings,and Aromatics Volume06.03 Paint-Pigments,Drying Oils,Polymers,Resins,Naval Stores,  
ASTM ANNUALBOOK 2015 Section6 Paints,Related Coatings, and Aromatics Volume06.04 Paint-Solvents; Aromatic Hydrocarbons  
ASTM ANNUALBOOK 2015 Section14 General Methods and Instrumentation Volume14.02 General Test Methods; Forensic Psychophysiology  
ASTM ANNUALBOOK 2015 Section14 General Methods and Instrumentation Volume14.04 Laboratory Apparatus; Degradation of Materials; SI;  
ASTM ANNUALBOOK 2015 Section15 General Products,Chemical Specialties,and End Use Products Volume15.03 Space Simulation;  
ASTM ANNUALBOOK 2015 Section15 General Products,Chemical Specialties,and End Use Products Volume15.06 Adhesives  
ASTM ANNUALBOOK 2015 Section15 General Products,Chemical Specialties,and End Use Products Volume15.11 Consumer Products  

 ページの先頭へ

 ARP規格

規格番号 タイトル 翻訳
ARP 1755 Rev.B :2000 Effect of Cleaning Agents on Aircraft Engine Materials, Stock Loss Test Method  
ARP 1820 Rev.B :2012 Chord Method of Evaluating Surface Microstructural Characteristics  
ARP 1917 Rev.A :2013 (R)Clarification of Terms Used in Aerospace Metals Specifications  
ARP 1962 Rev.A :2007 Training and Approval of Heat-Treating Personnel  
ARP 4992 Rev.B :2012 Periodic Test for Processing Solutions  

ページの先頭へ

 CISPR規格

規格番号 タイトル 翻訳
CISPR 11 Ed. 5.1:2010 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 11 Amd.1 Ed. 5.0:2010 Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 11 Ed. 6.0:2015 (b) Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 12 Ed. 6.0:2007 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers  
CISPR 12 Amd.1 Ed. 6.0:2009 Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers 邦訳版
CISPR 12 Ed. 6.1:2009 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers 邦訳版
CISPR 13 Ed. 5.0:2009 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 13 Amd.1 Ed. 5.0:2015 (b) Amendment 1 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 14-1 Ed. 5.0:2005 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission 邦訳版
CISPR 14-1 Amd.1 Ed. 5.0:2008 Amendment 1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission 邦訳版
CISPR 14-1 Amd.2 Ed. 5.0:2011 Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission 邦訳版
CISPR 14-1 Ed. 5.2:2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission  
CISPR 14-2 Ed. 1.2:2008 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard 邦訳版
CISPR 14-2 Amd.2 Ed. 1.1:2001 Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard 邦訳版
CISPR 14-2 Ed. 2.0:2015 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard 邦訳版
CISPR 15 Ed. 7.0:2005 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
CISPR 15 Amd.1 Ed. 7.0:2006 Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
CISPR 15 Amd.2 Ed. 7.0:2008 Amendment 2 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
CISPR 15 Ed. 7.2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
CISPR 15 Ed. 8.0:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment  
CISPR 15 Ed. 8.0:2013 (b) Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
CISPR 15 Amd.1 Ed. 8.0:2015 (b) Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

邦訳版

CISPR 16-1 Ed. 1 :2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances 邦訳版
CISPR 16-1-2 Ed. 1.2:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances  
CISPR 16-1-2 Amd.1 Ed. 1.0:2004 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances 邦訳版
CISPR 16-1-2 Amd.2 Ed. 1.0:2006 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances 邦訳版
CISPR 16-1-3 Ed. 2.0:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power 邦訳版
CISPR 16-2-1 Ed. 2.0:2008 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements 邦訳版
CISPR 16-2-1 Amd.1 Ed. 2.0:2010 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements 邦訳版
CISPR 16-2-1 Amd.2 Ed. 2.0:2013 Amendment 2- Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements 邦訳版
CISPR 16-2-1 Ed. 2.1:2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements  
CISPR 16-2-2 Ed. 2.0:2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power 邦訳版
CISPR 16-2-4 Ed. 1.0:2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements 邦訳版
CISPR 20 Ed. 6.0:2006 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement  
CISPR 20 Ed. 6.0:2006 (b)

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

邦訳版
CISPR 20 Ed. 6.0:2011 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement 邦訳版
CISPR 20 Amd.1 Ed. 6.0:2013 (b) Amemdment 1 - Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement 邦訳版
CISPR 22 Ed. 6.0:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement 邦訳版
CISPR 24 Ed. 2.0:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement 邦訳版
CISPR 24 Amd.1 Ed. 2.0:2015 (b) Amendment 1 - Information technology equipment - Immunity characteristics - Limits and methods of measurement 邦訳版
CISPR 25 Ed. 3.0:2008 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers 邦訳版

ページの先頭へ

 FCC規格

規格番号 タイトル 翻訳
47CFR part 1:2010 Practice and procedure  
47CFR part 15:2010 Radio frequency devices  
47CFR part 18:2010 Industrial,scientifc,and medical equipment  

ページの先頭へ

 EN規格

規格番号 タイトル 翻訳
EN 71-1:2011 Safety of toys. Mechanical and physical properties 邦訳版
EN 71-1:2014 Safety of toys. Mechanical and physical properties

 

EN 71-2:2011 Safety of toys. Flammability 邦訳版
EN 71-2:2011+A1:2014 Safety of toys. Flammability  
EN 71-3:2013 Safety of toys. Migration of certain elements 邦訳版
EN 15038:2006 Translaton services - Service requirements  
EN 50581:2012 Technical documentation for the assessment of electrical and elevtronic products with respect to the restriction of hazardous substances 邦訳版 
EN 55011:2009+A1:2010 Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement 邦訳版
EN 55012:2007+A1:2009 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers  
EN 55012:2007 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers 邦訳版
EN 55013:2001+A2:2006 Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement 邦訳版
EN 55013:2013 Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement 邦訳版
EN 55014-1:2006+A2:2011 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission 邦訳版
EN 55014-2:1997+A2:2008,
CISPR 14-2:1997
Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Immunity. Product family standard 邦訳版
EN 55014-2:2015 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Immunity. Product family standard  邦訳版
EN 55015:2006+A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 邦訳版
EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment  邦訳版
EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement 邦訳版
EN 55024:2010 Information technology equipment. Immunity characteristics. Limits and methods of measurement 邦訳版
EN 55024:2010+A1:2015 Information technology equipment. Immunity characteristics. Limits and methods of measurement  邦訳版
EN 60335-1:2012 Household and similar electrical applicances- Safety- Part 1: General requirements 邦訳版
EN 60335-1:2012+A11:2014 Household and similar electrical appliances. Safety. General requirements  邦訳版
EN 61000-3-2:2006+A2:2009 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ? 16 A per phase) 邦訳版
EN 61000-3-2:2014 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)  邦訳版
EN 61000-3-3:2008 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low--Voltage supply systems, for equipment with rated current ? 16 A per phase and not subject to conditional connection 邦訳版
EN 61000-3-3:2013 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection  邦訳版
EN 61000-4-4:2004+A1:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test 邦訳版
EN 61000-4-4:2012 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test  邦訳版
EN 61000-4-5:2006 Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test 邦訳版
EN 61000-4-5:2014 Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test  邦訳版
EN 61000-6-1:2007 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light--Industrial environments 邦訳版
EN 61000-6-2:2005 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments 邦訳版
EN 61000-6-3:2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light--Industrial environments 邦訳版
EN 61000-6-4:2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments 邦訳版
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements 邦訳版
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements 邦訳版
EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements   

ページの先頭へ

 IEC規格

規格番号 タイトル 翻訳
ISO/IEC Guide51:1999 Safety aspects - Guidelines for their inclusion in standards 邦訳版
IEC 60034-30 Ed. 1.0:2008 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) 邦訳版
IEC 60068-2-6 Ed. 7.0:2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 邦訳版
IEC 60068-2-27 Ed. 4.0:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock 邦訳版
IEC 60068-2-42 Ed. 3.0:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections 邦訳版
IEC 60068-2-43 Ed. 2.0:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections 邦訳版
IEC 60068-2-64 Ed. 2.0:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance 邦訳版
IEC 60079-0 Ed. 6.0:2011 Explosive atmospheres - Part 0: Equipment - General requirements  
IEC 60079-1 Ed. 6.0:2007 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"  
IEC 60204-1 Ed. 5.0:2005 Safety of machinery - Electrical equipment of machines - Part 1: General requirements 邦訳版
IEC 60204-1 Amd.1 Ed. 5.0:2008 Amendment 1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements 邦訳版
IEC 60204-1 Ed. 5.1:2009 Safety of machinery - Electrical equipment of machines - Part 1: General requirements 邦訳版
IEC 60204-11 Ed. 1.0:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV 邦訳版
IEC 60335-1 Ed. 5.0:2010 Household and similar electrical appliances - Safety - Part 1: General requirements 邦訳版
IEC 60335-1 Amd.1 Ed. 5.0:2013 (b) Amendment 1 - Household and similar electrical appliances - Safety - Part 1: General requirements

邦訳版

IEC 60529 Amd.1 Ed. 2.0:1999 Degrees of protection provided by enclosures (IP Code) 邦訳版
IEC 60529 Ed. 2.0:1992 Degrees of protection provided by enclosures (IP Code) 邦訳版
IEC 60529 Amd.2 Ed. 2.0:2013 (b) Amendment 2 - Degrees of protection provided by enclosures (IP Code) 邦訳版
IEC 60601-1 Ed. 3.0:2005 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance 邦訳版
IEC 60601-1 Amd.1 Ed. 3.0:2012 Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance 邦訳版
IEC 60601-1-2 Ed. 3.0:2007 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests 邦訳版
IEC 60601-1-2 Ed. 4.0:2014 (b) Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests 邦訳版
IEC 60601-1-3 Ed. 2.0:2008 Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipmment 邦訳版
IEC 60601-1-6 Ed. 3.0:2010 Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability 邦訳版
IEC 60601-1-6 Amd.1 Ed. 3.0:2013 (b) Amendment 1 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability 邦訳版
IEC 60601-1-8 Ed. 2.0:2006 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems 邦訳版
IEC 60601-1-8 Amd.1 Ed. 2.0:2012 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems 邦訳版
IEC 60601-1-9 Ed. 1.0:2007 Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design 邦訳版
IEC 60601-1-11 Ed. 1.0:2010 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment 邦訳版
IEC 60601-1-11 Ed. 2.0:2015 (b) Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment 邦訳版
IEC 60601-2-46 Ed. 2.0:2010 Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables 邦訳版
IEC 60664-1 Ed. 2.0:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests 邦訳版
IEC 60664-5 Ed. 2.0:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm  
IEC 60825-1 Ed. 2.0:2007 Safety of laser products - Part 1: Equipment classification and requirements 邦訳版
IEC 60825-1 Ed. 3.0:2014 Safety of laser products - Part 1: Equipment classification and requirements 邦訳版
IEC 60950-1 Ed. 2.0:2005 Information technology equipment - Safety - Part 1: General requirements 邦訳版
IEC 60950-1 Amd.1 Ed. 2.0:2009 Amendment 1 - Information technology equipment - Safety - Part 1: General requirements 邦訳版
IEC 60950-1 Amd.2 Ed. 2.0:2013 (b) Amendment 2 - Information technology equipment - Safety - Part 1: General requirements 邦訳版
IEC 60950-22 Ed. 1.0:2005 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors 邦訳版
IEC/TR 61000-1-1 Ed. 1.0:1992 Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms 邦訳版
IEC/TR 61000-1-3 Ed. 1.0:2002 Electromagnetic compatibility (EMC) - Part 1-3: General - The effects of high-altitude EMP (HEMP) on civil equipment and systems 邦訳版
IEC/TR 61000-2-1 Ed. 1.0:1990 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 邦訳版
IEC 61000-2-2 Ed. 2.0:2002 Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems 邦訳版
IEC/TR 61000-2-3 Ed. 1.0:1992 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena 邦訳版
IEC 61000-2-4 Ed. 2.0:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances 邦訳版
IEC/TR 61000-2-6 Ed. 1.0:1995 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances 邦訳版
IEC/TR 61000-2-7 Ed. 1.0:1998 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments 邦訳版
IEC/TR 61000-2-8 Ed. 1.0:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results 邦訳版
IEC 61000-2-9 Ed. 1.0:1996 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication 邦訳版
IEC 61000-2-10 Ed. 1.0:1998 Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance 邦訳版
IEC 61000-2-11 Ed. 1.0:1999 Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments 邦訳版
IEC 61000-2-13 Ed. 1.0:2005 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted 邦訳版
IEC 61000-3-2 Amd.1 Ed. 3.0:2008 Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)  
IEC 61000-3-2 Amd.2 Ed. 3.0:2009 Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)  
IEC 61000-3-2 Ed. 3.2:2005 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) 邦訳版
IEC 61000-3-2 Ed. 3.2:2009 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)  
IEC 61000-3-2 Ed. 4.0:2014 (b) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≦ 16 A per phase) 邦訳版
IEC 61000-3-3 Ed. 2.0:2008 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection  
IEC 61000-3-3 Ed. 3.0:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16 A per phase and not subject to conditional connection 邦訳版
IEC 61000-3-3 Ed. 3.0:2013 (b) Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection  
IEC/TS 61000-3-4 Ed. 1.0:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A 邦訳版
IEC 61000-3-8 Ed. 1.0:1997 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels 邦訳版
IEC 61000-3-11 Ed. 1.0:2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subjet to conditional connection 邦訳版
IEC 61000-3-11 Ed. 1.0:2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subjet to conditional connection  
IEC 61000-3-12 Ed. 2.0:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase 邦訳版
IEC 61000-3-12 Ed. 2.0:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≦ 75 A per phase  
IEC 61000-4-1 Ed. 3.0:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series 邦訳版
IEC 61000-4-2 Ed. 2.0:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test  邦訳版
IEC 61000-4-3 Ed. 3.0:2006 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test 邦訳版
IEC 61000-4-3 Amd.1 Ed. 3.0:2007 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test 邦訳版
IEC 61000-4-3 Amd.2 Ed. 3.0:2010 Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test 邦訳版
IEC 61000-4-4 Ed. 3.0:2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test 邦訳版
IEC 61000-4-5 Ed. 2.0:2005 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test 邦訳版
IEC 61000-4-5 Ed. 3.0:2014 (b) Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test 邦訳版
IEC 61000-4-6 Ed. 3.0:2008 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields 邦訳版
IEC 61000-4-6 Ed. 4.0:2013 (b) Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields 邦訳版
IEC 61000-4-7 Ed. 2.0:2002 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 邦訳版
IEC 61000-4-7 Amd.1 Ed. 2.0:2008 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 邦訳版
IEC 61000-4-8 Ed. 2.0:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test  
IEC 61000-4-9 Ed. 1.0:1993 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test 邦訳版
IEC 61000-4-9 Amd.1 Ed. 1.0:2000 Amendment 1- Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test 邦訳版
IEC 61000-4-9 Ed. 1.1:2001 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test  
IEC 61000-4-10 Amd.1 Ed. 1.0:2000 (b) Amendment 1 邦訳版
IEC 61000-4-10 Ed. 1.1:2001(b) Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test 邦訳版
IEC 61000-4-11 Ed. 2.0:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests  邦訳版
IEC 61000-4-13 Ed. 1:2002 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests 邦訳版
IEC 61000-4-13 Amd.1 Ed. 1.0:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests 邦訳版
IEC 61000-4-14 Amd.1 Ed. 1.0:2001 Amendment 1 邦訳版
IEC 61000-4-14 Amd.2 Ed. 1.0:2009 (b) Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-14 Ed. 1.2:1999 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-15 Ed. 2.0:2010 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications 邦訳版
IEC 61000-4-16 Ed. 1:1998 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz 邦訳版
IEC 61000-4-16 Amd.1 Ed. 1.0:2001 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz 邦訳版
IEC 61000-4-16 Amd.2 Ed. 1.0:2009 Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz 邦訳版
IEC 61000-4-17 Ed. 1:1999 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test 邦訳版
IEC 61000-4-17 Amd.1 Ed. 1.0:2001 Amendment 1 邦訳版
IEC 61000-4-17 Amd.2 Ed. 1.0:2008 Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test 邦訳版
IEC 61000-4-20 Ed. 2.0:2010 Electromagnetic compatiility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides  
IEC 61000-4-23 Ed. 1.0:2000 Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances 邦訳版
IEC 61000-4-24 Ed. 1.0:1997 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC Publication 邦訳版
IEC 61000-4-27 Amd.1 Ed. 1.0:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-27 Ed. 1:2000 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-28 Amd.1 Ed. 1.0:2001 Amendment 1 邦訳版
IEC 61000-4-28 Amd.2 Ed. 1.0:2009 Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-28 Ed. 1.2:2009 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase 邦訳版
IEC 61000-4-29 Ed. 1.0:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests 邦訳版
IEC/TR 61000-4-32 Ed. 1.0:2002 Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium 邦訳版
IEC 61000-4-33 Ed. 1.0:2005 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters 邦訳版
IEC 61000-4-34 Ed. 1.0:2005 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase 邦訳版
IEC 61000-4-34 Amd.1 Ed. 1.0:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmentwith mains current more than 16 A per phase 邦訳版
IEC/TR 61000-5-1 Ed. 1.0:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication 邦訳版
IEC/TR 61000-5-2 Ed. 1.0:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling 邦訳版
IEC/TR 61000-5-3 Ed. 1.0:1999 Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts 邦訳版
IEC/TS 61000-5-4 Ed. 1.0:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4: Immunity to HEMP - Specifications for protective devices against HEMP radiated disturbance. Basic EMC Publication 邦訳版
IEC/TR 61000-5-6 Ed. 1.0:2002 Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences 邦訳版
IEC 61000-5-5 Ed. 1.0:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication 邦訳版
IEC 61000-5-7 Ed. 1.0:2001 Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) 邦訳版
IEC 61000-6-1 Ed. 2.0:2005 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments 邦訳版
IEC 61000-6-2 Ed. 2.0:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments 邦訳版
IEC 61000-6-3 Amd.1 Ed. 2.0:2010 Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments 邦訳版
IEC 61000-6-3 Ed. 2.0:2006 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments 邦訳版
IEC 61000-6-4 Amd.1 Ed. 2.0:2010 Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments 邦訳版
IEC 61000-6-4 Ed. 2.0:2006 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments 邦訳版
IEC/TS 61000-6-5 Ed. 1.0:2001 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments 邦訳版
IEC 61000-6-6 Ed. 1.0:2003 Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment 邦訳版
IEC 61010-1 Ed. 3.0:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements 邦訳版
IEC 61326-1 Ed. 2.0:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements 邦訳版
IEC 61326-2-1 Ed. 2.0:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications 邦訳版
IEC 61326-2-2 Ed. 2.0:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems 邦訳版
IEC 61326-2-3 Ed. 2.0:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning 邦訳版
IEC 61326-2-6 Ed. 2.0:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment 邦訳版
IEC 61373 Ed. 2.0:2010 Railway applications - Rolling stock equipment - Shock and vibration tests  
IEC 61558-2-1 Ed. 2.0:2007 (b) Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications 邦訳版
IEC 62304 Ed. 1.0:2006 Medical device software - Software life cycle processes 邦訳版
IEC 62321 Ed. 1.0:2008 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) 邦訳版
IEC 62333-1 Ed. 1.0:2006 Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties  
IEC 62333-2 Ed. 1.0:2006 Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods  
IEC 62368-1 Ed. 2.0:2014 (b) Audio/video, information and communication technology equipment - Part 1: Safety requirements  
IEC 62471 Ed. 1.0:2006 Photobiological safety of lamps and lamp systems  
IEC/TR 62471-2 Ed. 1.0:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety  
IEC/PAS 62596 Ed. 1.0:2009 Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines 邦訳版
IEC 82079-1 Ed. 1.0:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements 邦訳版

ページの先頭へ

 ISO規格   

規格番号 タイトル 翻訳
ISO/IEC Guide51:1999 Safety aspects - Guidelines for their inclusion in standards 邦訳版
ISO/IEC Guide 51:2014 Safety aspects -- Guidelines for their inclusion in standards 邦訳版
ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)  
ISO 1520:2006 Paints and varnishes - Cupping test  
ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light  
ISO 2177:2003 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution  
ISO 2233:2000 Packaging - Complete, filled transport packages and unit loads - Conditioning for testing  
ISO 2234:2000 Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load  
ISO 2409:2007 Paints and varnishes - Cross-cut test  
ISO 2409:2013 Paints and varnishes - Cross-cut test  
ISO 2808:2007 Paints and varnishes - Determination of film thickness  
ISO 2812-1:2007 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water  
ISO 2813:1994 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees  
ISO 2884-1:1999 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear  
ISO 2884-2:2003 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed  
ISO 3248:1998 Paints and varnishes - Determination of the effect of heat  
ISO 3497:2000 Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods  
ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms  
ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane 邦訳版
ISO 3917:1999 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering  
ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters  
ISO 4288:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture  
ISO 4624:2002 Paints and varnishes - Pull-off test for adhesion  
ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience  
ISO 4892-1:1999 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance  
ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps  
ISO 4892-2:2006/Amd 1:2009 Amendment 1 - Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps  
ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps  
ISO 4892-4:2004 Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps  
ISO 6270-1:1998 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation  
ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres  
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter  
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter  
ISO 6507-1:2005 Metallic materials - Vickers hardness test - Part 1: Test method  
ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values  
ISO 6508-1:2005 Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)  
ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature  
ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature  
ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines 邦訳版
ISO 7668:2010 Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees  
ISO 7724-2:1984 Paints and varnishes - Colorimetry - Part 2: Colour measurement  
ISO 7784-2:1997 Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method  
ISO 7784-3:2000 Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method  
ISO 8318:2000 Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency  
ISO 9000:2015 Quality management systems -- Fundamentals and vocabulary 邦訳版
ISO 9227:2012 Corrosion tests in artificial atmospheres - Salt spray tests 邦訳版
ISO 10062:2006 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)  
ISO 10605:2008 Road vehicles - Test methods for electrical disturbances from electrostatic discharge 邦訳版
ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections  
ISO 11341:2004 Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation  
ISO 11452-1:2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology  
ISO 11452-1:2005   邦訳版
ISO 11452-1:2005/Amd 1:2008   邦訳版
ISO 11452-3:2001 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM) cell 邦訳版
ISO 11452-4:2011 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods 邦訳版
ISO 11997-1:2005 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity  
ISO 11997-2:2000 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light  
ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction 邦訳版
ISO 13320:2009 Particle size analysis - Laser diffraction methods  
ISO 13355:2001 Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test  
ISO 13849-1:2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design 邦訳版
ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation 邦訳版
ISO 14001:2015 Environmental management systems -- Requirements with guidance for use 邦訳版
ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications  
ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification  
ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method  
ISO 14782:1999 Plastics - Determination of haze for transparent materials  
ISO 14971:2007 Medical devices - Application of risk management to medical devices 邦訳版
ISO 15184:1998 Paints and varnishes - Determination of film hardness by pencil test  
ISO 17100:2015 Translation Services. Requirements for translation services  
ISO 17398:2004 Safety colours and safety signs - Classification, performance and durability of safety signs  

ページの先頭へ

 MIL規格

規格番号 タイトル 翻訳
MIL-A-8625F :1993 Anodic Coatings for Aluminum and Aluminum Alloys  
MIL-A-8625F Amendment 1 :2003  Anodic Coatings for Aluminum and Aluminum Alloys   
MIL-DTL-5541F :2006  DOD Preferred Methods for Acceptance of Product   
MIL-DTL-13924D Notice1 :2003  DOD Preferred Methods for Acceptance of Product   
MIL-DTL-14538D Amendment1 :2011  DOD Preferred Methods for Acceptance of Product   
MIL-DTL-5002E :2011  DOD Preferred Methods for Acceptance of Product   
MIL-DTL-81706B Amendment1 :2006  DOD Preferred Methods for Acceptance of Product   
MIL-PRF-23377K :2012  DOD Preferred Methods for Acceptance of Product   
 MIL-PRF-85582E :2012 DOD Preferred Methods for Acceptance of Product   
MIL--STD-810G(2008) ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS  
MIL-STD-1916 Notice2 :2014

DOD Preferred Methods for Acceptance of Product

 

ページの先頭へ

 AS規格

規格番号 タイトル 翻訳
AS9003 Rev.A :2012 (R)Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations  

ページの先頭へ

 CID規格

規格番号 タイトル 翻訳
CID A-A-59105B Notice2 :2014 Nitric Acid, Technical  
CID A-A-59123 Notice2 :2011 Sodium Dichromate Dihydrate, Technical  

ページの先頭へ

 FED規格

規格番号 タイトル 翻訳
FED-STD-141D :2001 Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing  
FED-STD-313E :2014 Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities  

ページの先頭へ

 JIS規格

規格番号 タイトル
JIS C 0511-1:2008

機能安全―プロセス産業分野の安全計装システム―第1部:フレームワーク,定義及びシステム・ハードウェア・ソフトウェアの要求事項

ページの先頭へ

 JEITA規格

規格番号 タイトル
JEITA ET-7407A CSP及びBGAパッケージの実装状態でのはんだ接合部の耐久性試験方法
JEITA EDR-4703A ベアダイの品質ガイドライン
EIAJ ED-4703 半導体デバイスの工程内評価及び構造解析方法
EIAJ ED-4703-1 半導体デバイスの工程内評価及び構造解析方法(追補1)

ページの先頭へ

 JASO規格

規格番号 タイトル
JASO 日本の自動車規格DVD--ROM(2011)[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語
JASO 日本の自動車規格DVD--ROM(2012)[日本語版]-(社)自動車技術会・一般財団法人日本規格協会/共同制作日本語

ページの先頭へ

 NAS規格

規格番号 タイトル 翻訳
NAS 410 Rev.4 : 2014 NAS Certification & Qualification of Nondestructive Test Personnel  
NAS M1312 Rev.1 :2012 Fastener Test Methods  
NAS M1312-5 Rev.1 :2012 Fastener Test Methods Method 5 Stress Durability  

ページの先頭へ

 SJAC規格

規格番号 タイトル
SJAC 9101E :2014

品質マネジメント・システムの評価 - 航空、宇宙及び防衛分野の組織に対する審査要求事項

(Quality Management Systems - Audit Requirements for Aviation, Space, and Defense Organizations)

SJAC 9102B :2015

航空宇宙 初回製品検査要求事項

(Aerospace First Article Inspection Requirement)

SJAC 9103A :2013

航空宇宙 キー特性管理

(Variation Management of Key Characteristics)

SJAC 9131A :2014

航空宇宙-品質マネジメントシステム - 不適合データの定義及び文書

(Aerospace Series - Quality Management Systems - Nonconformance Data Definition and Documentation)

SJAC 9162 :2006

作業者による自主確認プログラム

(Aerospace Operator Self-Verification Programs)

ページの先頭へ

 SVRP規格

規格番号 タイトル 翻訳
SVRP J423 Reaf.FEB1998 Methods of Measuring Case Depth  

ページの先頭へ

 

広域首都圏輸出製品技術支援センター お問い合わせ先

国際化推進室(MTEP)

TEL:03-5530-2126

国際規格や海外の製品規格に関するご質問・ご相談は「MTEP相談フォーム」をご利用ください。

MTEP相談フォーム

より良いウェブサイトにするためにみなさまのご意見をお聞かせください

このページの情報は役に立ちましたか?

このページの情報は見つけやすかったですか?

ページの先頭へ